Stroj za robne trakove

IMA Advantage 400

Single-Sided Edge Bander Advantage 400

Equipment:
- Working length: 6700 mm
- Release agent application top and bottom
- Jointing milling unit 08.380
- Pre-heater (300 mm long), 2 x 1.5 kW, for pre-warming the workpiece edge
- Gluing unit 283.1516, toothed belt drive
- Strip detection to prevent gluing errors
- End trimming unit for front and rear edges of workpiece
- Reserve space for applying lubricant to high-gloss edges
- Milling unit 08.0561
- Copy milling unit SKF-L
- Profile scraper unit 08.519
- Spray nozzles (top and bottom) for applying cleaning agents
- Self-sensing scraper unit 08.521
- Buffing unit 08.617-2
- Interior lighting
- Electronic height adjustment of pressure beam (single-sided)

Technical Data "Workpiece":
- Min. workpiece length: 150 mm
- Min. workpiece width: 65*/ 150 mm (*for max. workpiece thickness of 25 mm)
- Min. workpiece thickness: 8 / 12* mm (*with profile scraper)
- Max. workpiece thickness: 60 mm
- Smallest workpiece: 65x380 / 150x380 x 19 mm
- Allowance per workpiece edge: 0 - 5 mm* (*observe max. machining cross-section)
- Workpiece shape: rectangular
- Material: chipboard, MDF
- Surface material: direct coating (melamine paper), paper, foil, veneer
- Lateral protruding coating material: 0 mm

Technical Data "Edge Material":
Roll material without foil*:
- Paper edges & plastic edges: 0.3 - 3.0 mm
(*Foil only with additional equipment)
- Veneer edges: 0.5 - 3.0 mm
Veneer edge cross-section max.: 150 mm²
Plastic edge cross-section max.: 180 mm²
Pre-cut edge strips: 3.0 - 12.0 mm
Strip cross-section max.: 600 mm²
Min. edge height: 12 mm
Max. edge height: 65 mm
Max. upper edge overhang: 2 mm
Edge profiles:
- Paper edge approx. 0.4 mm (15° chamfer)
- Plastic edge up to 3.0 mm (radius depends on tool)
- Strip up to 12 mm (flush milling)

Technical Data "Machine":
Working length: 6700 mm
Feed speed: 20 m/min for Advantage 400
Constant workpiece projection from chain track: 35 mm + edge thickness
Max. trimming cross-section: 520 mm²
Min. pass-through width (with 35 mm projection): 65 mm
Min. workpiece length in feed direction: 150 mm
Base height (top of chain track): 900 mm
Unit side: left in feed direction
Control voltage: 24 V DC / 230 V AC
Mains voltage: 3/N/PE, 400/230 V, 50 Hz, +/-5%
(Residual current device (RCD) not applicable)

Machine Control ICOS Expert
Features:
- PC-based control system with integrated PLC and electronic line control
- Simple, process-oriented program creation
- Navigation and operation via touch screen
- Program memory for up to 1,000 programs
- Program number: 3-digit numeric
- Control system prepared for service portal
Technical Data Control:*
- Panel PC with integrated 15" TFT display, with touch screen
- USB port
- Fast EtherCAT interface (fieldbus)
- Ethernet network connection RJ45 in the control cabinet
- Operating system: Windows with TwinCAT system for real-time control

Note:
The technical data and descriptions are based on the original order confirmation. Data is provided for information only and is not binding.

Condition:
- Machine fully overhauled
- New pressure belt
Cedpfeitu Eaex Agterh
- New feed chain
- New tracing rollers and post-processing tools

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.