Stroj za termooblikovanje
ILLIG UA 100 4G

Name: ILLIG UA 100 4G
Brand: ILLIG
Availability: InStock

Leto izdelave

1990

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Centre

Stroj za termooblikovanje ILLIG UA 100 4G

Spremljaj dražbo

Podatki o stroju

Opis stroja:: Stroj za termooblikovanje

Proizvajalec:: ILLIG

Model:: UA 100 4G

Serijska številka:: 1537

Leto izdelave:: 1990

Stanje:: pripravljen za uporabo (rabljen)

funkcionalnost:: popolnoma funkcionalen

Obratovalne ure:: 45.353 h

Tehnične podrobnosti

Debelina materiala:: 10 mm

Dolžina plošče:: 1.000 mm

Širina plošče:: 700 mm

zagotovitev

Lokacija:: Centre, Francija – Razdalja: pribl. 946 km

Razpoložljivost:: takoj po zaključku dražbe

Dobavni pogoji:: FCA

Stroški demontaže in nakladanja:
500,00 € (zavezujoče)

Prevzem na lokaciji:
brezplačno

Stroški pošiljanja:

Opis

Hybrid machine for thermoforming of sheets or coils

TECHNICAL DETAILS
Maximum width: 700 mm
Maximum plate size: 1,000 x 700 mm
Maximum sheet thickness: 10 mm

Heating capacity: 31.1 kW
Motor power: 5.59 kW

EQUIPMENT
- Plate loader type BE without preheating
- Coil unwinding device type PR
- Upper and lower table
- Schleicher PDPF control unit
- Quick clamping system for reducing frames and tools

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Obdelava plačil

dodatni stroški nakupa:: 18 %

Plačilni pogoji:: 100 % predplačilo

Načini plačila:: bančno nakazilo

Račun se izdaja v višini najvišje ponudbe, pri čemer se prištejejo morebitni stroški demontaže/nakladanja, stroški pošiljanja ter dodatni stroški nakupa in zakonski DDV.

Podrobnosti ponudbe

ID ponudbe:: A19355701

Št. reference:: AUC-2506054

Nazadnje posodobljeno:: dne 13.06.2025

Ekskluzivna ponudba:: na voljo samo na dražbi

Opazovati

Stik

Kontaktna oseba: Cedric Schuhmann

ID stroja: 19355701

+49 201 8... oglasi

Telefon: +49 201 857 861 77

Zaščita kupca Machineseeker

Varno plačilo prek fiduciarniega računa

Strogo preverjeni prodajalec

Osebna in večjezična podpora

Izplačilo kupnine se izvede šele po predaji blaga.

ogled

Možen ogled

Maschinensucher na splošno priporoča ogled rabljenih strojev.

Vsi podatki so vneseni po najboljšem vedenju in vesti – prepričajte se na kraju samem.

Ponudnik

Profesionalni komercialni prodajalec
Od 2021 pri Machineseeker

Francija

Razdalja: pribl. 942 km

Tukaj bi lahko stala vaša naprava

Dražba s številko 1

Prodate v samo nekaj tednih!

Prodajate po najvišji ceni!

Prodajate brez fiksnih stroškov in tveganj!

Dodatne informacije

ali pokličite +49 201 857 861 10

Razpravljati o sodelovanju

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Stroj za termooblikovanje Illig UA 100 4G Solo/ BE

Möckmühl

550 km

Stroj za termooblikovanje
IlligUA 100 4G Solo/ BE

Klic

Stanje: delavnici obnovljeno (rabljeno), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical Features: - Control: Siemens Simatic S7-300, OP 37 panel - Climate-controlled control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Pneumatically actuated locking of upper reduction frame - Locking of lower reduction frame via cylinder - 4 cooling fans - Adjustable vacuum under the table via cascade control - Adjustable pre-blow/demould function via cascade control - Large front opening for tool change - Film sag control using photocell with support air - Automatic tool change system Under-table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Cjdpfx Aowf Dvaedhsrh Top punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change tool clamping system Sheet feeding: - Automatic raising of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for embossed material Optional retrofit: Preheating unit - Top heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Bottom heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Temperature control for top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via UA operator panel) Optional retrofit: Roll processing - Cross cutter and feeder rollers in loader - Roll stand RO 800

Poglej podrobnosti

Dražba

Stroj za termooblikovanje Adolf Illig UA 100 / 4g

Flämische Region

954 km

Stroj za termooblikovanje
Adolf IlligUA 100 / 4g

Podrobnosti

mali oglas

Stroj za termoformiranje ILLIG UA 100 4g

Adon

942 km

Stroj za termoformiranje
ILLIGUA 100 4g

20.000 €

FCA Začetna cena brez DDV

Klic

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 45.350 h, številka stroja/vozila: 1537, Hybrid machine capable of thermoforming sheets or rolls. Machine equipped with a BE-type sheet loader without preheating. Equipped with a PR-type roll unwinder. Fitted with both upper and lower tables. Controlled by a Schleicher PDPF controller. Quick clamping system for reduction frames and tooling. Maximum width: 700 mm. Maximum sheet size: 1000 x 700 mm. Maximum sheet thickness: 10 mm. Crsdpfxstv Ivze Adhoh We will handle disassembly and loading onto your truck, which you must make available for collection.

Poglej podrobnosti

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.