CNC stružnica

Ikegai TNC 75

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Bridgeport VMC 600 ECO Machining Centre Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of Manufacture: 2012, in excellent original condition The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE-compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control: HEIDENHAIN ITNC 530 Traverse paths (X/Y/Z): 600/410/520 mm Rapid traverse (X/Y/Z-axis): 40/40/20 m/min Worktable dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg Hsdpfxsxtxk Ss Afaep T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeatability: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the Machine: For sale is a Bridgeport VMC 600 EC machining centre equipped with a Heidenhain ITNC 530 control. This machining centre is in very good original condition. It comes from a company where it was used only lightly for training purposes. The control is very user-friendly. The linear guides are regularly lubricated by the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power at our facility. Further milling machines from well-known manufacturers can be found on our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Pomik v osi x: 500 mm Pomik v osi y: 450 mm Pomik v osi z: 400 mm Krmilnik: Siemens 840 D Vpenjalni stožec: SK 40 Vreteno - brezstopenjska hitrost: 2 obr/min Podajalna hitrost: mm/min Menjalec orodij: 16 mest Vpenjalna površina: 700 x 500 mm Maks. teža obdelovanca: 500 kg Teža stroja: ca. 4,4 t Hedezawmaopfx Afasp Dimenzije stroja: 2,8 x 2,6 x 2,5 m Sistem za hlajenje, ročni obroč Polna kabina Le cca 1.500 delovnih ur

Stanje: rabljeno, Leto izdelave: 2006, Full Bore Diameter / mm Drilling Depth / mm Number of Spindles / 2-Machine Package: Froriep Deep Hole Drilling Machine & Irle Finishing Machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated units for the complete machining of long, heavy workpieces that demand maximum precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-Machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. Drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Max. swing over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC Control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outside diameter: 850 mm With up to 50,000 Nm torque perfectly suited for smooth boring, honing, and demanding finishing processes. Your advantages at a glance: - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tonnes - High process reliability thanks to perfectly synchronized machines - Immediately available, well-maintained, and in operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large-part manufacturing Hedpfjuddimex Afajp

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 Hedpfox S Edlex Afasp z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machine repainted in white in 2014 (per SIEMENS ENERGY specification) Technical Data Working Area - Max. swing diameter over bed: 570 mm - Max. swing diameter over cross slide: 365 mm - Max. turning length: 1500 mm - Centre height over flat bed: 280 mm - Max. workpiece weight: 400 / 1000 kg - Max. clamping length: 1300 mm Spindle - Spindle head as per DIN 55027, size 8, internal taper 70 - Spindle bore: Ø 62 mm - Spindle diameter in front bearing: 100 mm - Spindle length (depth): 200 mm - Max. chuck diameter: Ø 315 mm - Speed range: 3–2500 rpm - Max. faceplate diameter: Ø 560 mm - Max. faceplate speed: 700 rpm - Max. torque: 1800 Nm Cross Slide – Travel - Longitudinal travel (Z-axis): 1160 mm Hedjx Ahx Djpfx Afasp - Cross travel (X-axis): 345 mm - Tool system Parat-3 - Tool size DIN 770 (h x b): 32 × 25 mm Tailstock - Manual tailstock adjustment - Quill taper: MK5 - Quill diameter: 80 mm - Quill stroke: 190 mm Accessories / Special Equipment - Control: SINUMERIK 810 D - 32-bit processor, digital control - ManualTurn with cycle support - 10.4’’ colour LCD monitor - Operating manual 094.0003.1330-00 - 3-jaw chuck Ø 315 mm - Faceplate Ø 350 mm (up to Ø 560 with thin plates) - Radius turning - Turret: Parat size 3, 4-position, 4 × 90° manual indexing - Chip conveyor Bürener Maschinenfabrik - Particularly suitable for: see manufacturing range Cycle lathe DUS560TI (APL 11301) Includes one combined 4-jaw Wescott chuck with fitted jaw set A tool holder (Tripan) is installed – without tools or tool holders One fixed steady rest Chip conveyor with coolant tank and integrated pump The machine is in operation. Currently, no significant defects or limitations in use are known. Operating manual is available. An internal assessment inspection report from 2017 and the machine data sheet are attached.

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Y travel: 370 mm Z travel: 300 mm Table: 960 x 380 mm Spindle: ISO 40 Hsdpsqgcdtefx Afasp Dimensions: 185 x 180 x 235 cm (LxWxH)

Stanje: rabljeno, Leto izdelave: 1984, premer struženja nad prečnim suportom: 1.600 mm, premer struženja: 2.000 mm, premer struženja nad ležiščem sani: 2.000 mm, stružna dolžina: 35.000 mm, teža obdelovanca (maks.): 63.000 kg, Centre Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of Manufacture: 1984 Tandem construction on one bed with left and right headstocks Mirror double tailstock on both left and right sides Double carriage Steady rest included Roller rest included Operator panel with scales requires servicing and replacement Motorized tailstock for both left and right sides Hsdpfx Afoynky Asajp 3-bedway construction Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Field of application: Shipyards Propeller shafts Hydraulic cylinder shafts Camshafts Defense & Aeronautics Rolls and shafts for steel mills Crankshafts Specifications Metric US Standard Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Spindle speed: 180 RPM Feed rate X-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Dimensions (estimated): Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend you verify all key details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 13.321 h, potovalna razdalja osi X: 560 mm, pomik osi Y: 640 mm, pomik po osi Z: 640 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: SmoothG, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 35.000 W, število mest v zalogovniku orodij: 60, število osi: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control unit, through-spindle coolant at 32 bar, and a Renishaw OMP 60 probing system. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it is ideal for precise and efficient machining operations. Take the opportunity to purchase this HCN 4000 horizontal machining centre from Mazak. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets: 2; Indexing in 1° increments Hjdpfxjx Enlls Afajp • Control: Mazatrol SmoothG • Coolant/Air: Through-spindle coolant 32 bar; Through-spindle air supply; Niagara flushing • Functions: Rigid tapping (thread cutting without floating chuck); G00 indexing function • Compliance: CE marking Additional equipment • Renishaw OMP 60 probe • Renishaw Inspection+ (2022 version) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper size: SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 245 mm, pomik osi Y: 102 mm, pomik po osi Z: 1.270 mm, skupna masa: 6.300 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 18i-TB, Ta 3-osni horizontalni stružni stroj DOOSAN Puma 2500XLY je bil izdelan leta 2008. Nudi robustno zmogljivost za precizno struženje. Če iščete visokokakovostne možnosti za struženje, priporočamo, da razmislite o stroju DOOSAN Puma 2500XLY, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. Dodatna oprema Hodpjx D H Aqsfx Afasp • Dokumentacija/priročnik Prednosti stroja Tehnične prednosti stroja • Dolžina struženja: 1270 mm • Premer struženja nad prečnim sani: 334 mm • Premer struženja: 334 mm • Premer vretena: 86 mm • Nosilec orodja: 55 mm • Brezstopenjska nastavitev hitrosti Dodatne informacije Stroj je še vedno priključen na elektriko Obseg vpenjanja 30-150 mm Maksimalna odprtina 170 mm

Stanje: zelo dobro (rabljeno), potovalna razdalja osi X: 10.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, vrtilni razpon: 360 °, SHW PowerSpeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head, orthogonal design • Milling head clamping range: 360 x 1° • Milling head swivel range: 180 x 1° • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Intermittent: 36 – 6,000 rpm Automatic tool changer • Tool magazine for 48 tools Coolant system • Tank capacity: 500 l Hjdpfx Aexgq Ayefasp About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machinery - Spare parts - Customer service - Machine maintenance - Machine overhaul - CNC control upgrades ----- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large component machining - large machining - CNC large-part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine