Stebrni vrtalnik

IBERDRILL B 50

Stanje: novo, Drilling capacity in steel (diameter): 50 mm Drilling capacity in cast iron (diameter): 60 mm Tapping capacity: M36 Throat depth: 400 mm Quill stroke: 230 mm Spindle taper: MT 4 Spindle feed range: 0.1-0.2-0.3-0.4-0.5-0.6 mm/rev Kodpfxofg U Ttj Af Njll Spindle speeds: 54 - 1032 rpm Gear stages: 12 steps Column diameter: 200 mm Table surface: 550 x 550 mm Total power requirement: 3.0 kW Machine weight approx.: 0.72 t Space requirement approx.: 0.6 x 1.2 x 2.6 m Features: - Gears made of hardened and ground steel - Speed selection levers located at the front - Gear lubrication by automatic oil pump - Integrated coolant system - Machine lamp - Table can be rotated and tilted - Automatic feed with electromagnetic clutch - Handwheel for fine manual feed - Automatic tool ejector - Electrical controls integrated in the drill head - Emergency stop push button - Switch for clockwise/anticlockwise rotation - Height-adjustable chip guard with microswitch - CE marking

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Double-edger and trimming circular saw with electronic control, comprising: RET straightening and feed table. Chain bed in front of the machine with a liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment is hydraulic, with electronic positioning control offering the following setting options: stepless, 1 cm indexing, and switchable to 2 cm indexing. Cutting width between the flanges 24 - 440 mm. 10 variable preset dimensions, direct input of dimensions in mm. Constant dimension allowance, shrinkage allowance in percent. Splitter wedge pair: 1 x at zero line, 1 x hydraulically adjustable separately, with electronic positioning control. Kodpfx Afjwn D Ize Nell Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electric switch cabinet with power section and PLC control. Operator console. Slat sleeve, clamping length 403 mm. Adjustment and zeroing sleeve. Professionally dismantled and loaded free on truck.

Stanje: zelo dobro (rabljeno), 5-function Combination Machine (Thickness Planer, Surface Planer, Mortiser, Saw, and Spindle Moulder) Thickness Planer: - Usable width: 310 mm - Usable height: 230 mm - Cutter block: 3-knife, strip planer blades Surface Planer: - Usable width: 310 mm - Table length: 1400 mm - Cutter head diameter: 70 mm Spindle Moulder: - Spindle diameter: 30 mm, length: 125 mm - Table width: 800 mm - Moulding fence included Saw: - Saw blade diameter: 250 mm, tiltable up to 45° - Cutting height with 250 mm blade: 80 mm - Table width: 800 mm - Rip fence length: 635 mm Mortiser: - Slot mortising from 0 to 16 mm Performance and Motors: - Voltage: 380 V - Connection: Three-phase Location: Ex stock 54634 Bitburg - Immediately available - Klodpowh U Eqjfx Af Nsl

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Kodpeu Dm E Hsfx Af Noll Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: novo, The SSB F 60 Super VT PRO is a powerful pillar drilling machine that is perfectly suited to the demands of workshops. This machine combines state-of-the-art technology with robust design, making it ideal for single-item and small-batch production, as well as for drilling, countersinking, reaming, and thread cutting. Thanks to the electronically controlled servo quill feed and the large touchscreen control display, users benefit from user-friendly operation and flexible adjustment of machining parameters. Featuring a sturdy construction made from high-quality cast iron and a motorized height-adjustable table that swivels ± 45°, the SSB F 60 Super VT PRO is excellently suited for use in steel and hall construction. Additionally, the machine offers an impressive drilling capacity of up to 60 mm and an automatic threading cycle, enhancing efficiency. Take the opportunity to acquire the SSB F 60 Super VT PRO for your projects—request a quote and experience KNUTH quality! Kodpfxeq Rdqnj Af Noll

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Kljdpfxevadd Is Af Nel Copying attachment

Stanje: zelo dobro (rabljeno), IMM 72780 Double-Sided Polishing Machine Kljdsu Hanyjpfx Af Nol Like-new condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Stanje: dober (rabljeno), Tool sharpening machine with wet grinding. Klsdpfx Ajich Elof Nol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Cell with FANUC Arc Mate 100iD welding robot Kledpfx Aot Rwwref Nsl Year of manufacture: 2019 Axes: 6 Reach: 1441 mm Payload: 12 kg Fanuc System R-30iB Plus robot controller and housing measuring 2 m x 2 m x 2.7 m (without Kemper extraction system)

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Kedpfeh I Nqwex Af Nell Further technical data can be found in the attached data sheet.