CNC stružnica

Hyundai KIT 450

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Make: NIKKEN Type: CNC-200 Year: 1990 Psdjgabu Uspfx Ad Tspl with tailstock and base plate.

Stanje: rabljeno, Leto izdelave: 2001, Dolžina struženja 470 mm Ppodpfexdfi Nex Ad Tjl Maks. premer struženja 390 mm Število vrtljajev vretena 3500 obr/min Pomiki X/Z – 235/520 mm Število postaj v revolverju 12 kos Krmiljenje: MSG 500 Oprema: Različni nosilci orodij

Stanje: rabljeno, Leto izdelave: 2012, x-hod: 1.035 mm y-hod: 560 mm z-hod: 510 mm CNC upravljalnik: HEIDENHAIN TNC620 Dimenzije mize: 1200 x 560 mm Največja obremenitev mize: 1000 kg Vreteno: SK 40 Število vrtljajev vretena: 10.000 U/min Pogonska moč vretena: 13 kW Neskončno nastavljiv pomik: 20.000 mm/min Hitri pomik: 25 m/min Orodniška izmenjevalna naprava: 20 pozicij Naprav za notranje hlajenje (IKZ): 20 bar Obratovalna napetost: 400 V Skupna priključna moč: 17 kVA Teža stroja: cca 4,1 t Potrebni prostor: cca 2,55 x 2,30 x 2,25 m Ppodpfxow A Spvs Ad Tjl Transportni trak za odrezke: 3,90 x 0,95 x 1,60 m - Tovarniška št.: 1539000377A - Delovni čas stroja: 21.689 h - Delovni čas vretena: 9.021 h - Krmiljenje: Heidenhain TNC 620 - elektronsko ročno kolo - Transportni trak za odrezke - IKZ 20 bar

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS Ppsdpfjhzbipsx Ad Tjl 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Ppodpfsu Ixznsx Ad Tel Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: rabljeno, Leto izdelave: 2007, Število obratov 8000 min-1 Teža 5500 kg Leto izdelave 2007 Krmiljenje Siemens 840D Mere (d/š/v) 3600 x 2800 x 2400 mm Pomik - X 1035 mm Pomik - Y 560 mm Pomik - Z 510 mm Ppedpfewm Rqaex Ad Tol Na voljo več slik

Leto izdelave: 1997, Stanje: rabljeno, Cena: Na zahtevo - Leto izdelave: 1997 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat na voljo: Ne - Upravljanje: CNC - Število osi [kos]: 5 - X-os pomik [mm]: 1200 - Y-os pomik [mm]: 880 - Z-os pomik [mm]: 800 - Dolžina mize [mm]: 5000 - Orodni nosilec: SK40 Pjdewh Shvopfx Ad Tspl - Najv. hitrost vretena [rpm]: 18000 - Možnosti: Digitalni prikaz - Tip digitalnega prikaza: Heidenhain Finančne informacije DDV: Naveden cena je brez DDV DDV/Obdavčitev razlike: DDV je odbitni za podjetja Dostava in odkup so vedno mogoči za vse iz industrijskega področja Lukas van Rossum

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL STATION - Number of positions: 8 BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total connected load: 11 kVA WEIGHT AND DIMENSIONS - Required space: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 13,837 h ACCESSORIES - Control: Fanuc Oi-TD Psdpfjuhbbzox Ad Tjpl - 3-color status light - Driven guide bushing - Parts removal - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire extinguishing system * NB: Functionality not guaranteed. Inspection by a qualified company on the part of the buyer is recommended. - Electrical transformer

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.200 h, X 800 mm Y 460 mm Z 510 mm Styrsystem: FANUC Ppsdpfx Adjv Th E Aj Tol Spåntransportör Inklusive 4-axlig rundbord.

Stanje: rabljeno, Leto izdelave: 2006, Stružnica Hyundai Kia SKT 210SY, Y-os, C-os, gnana orodja Krmiljenje Fanuc 18iTB z Manual Guide Podpfx Ajwyv T Hjd Topl Maks. dolžina struženja: 530 mm Pomiki: X-os: 220 mm Y-os: 80 mm (+-40) Revolverska glava: 12 pozicij Sauter na VDI40 Prehod vretena: 65 mm, prehod protivretena: 33 mm Sonda za orodje Lovilec obdelovancev Zelo dobro stanje -Transporter odrezkov -Dokumentacija -Držala za orodja