Dizelski viličarji

Hyster H9.00XM-6

Stanje: dober (rabljeno), številka stroja/vozila: 3069, Leto izdelave: 2018, nosilnost: 9.000 kg, dvižna višina: 5.600 mm, tip droga: dupleks, širina nosilnega okvirja vilic: 150 mm, dolžina vilic: 2.440 mm, skupna dolžina: 4.270 mm, skupna širina: 2.555 mm, obratovalna teža: 13.430 kg, dodatne značilnosti opreme: Dual tread, Front mud guards, Rear mud guards, Centralized greasing system, Oprema: osvetlitev, Hyster H9.00XM-6 podjetja Uniktruck Vrsta koles – pogonsko kolo: pnevmatično Vrsta koles – krmilno kolo: pnevmatično Velikost kolesa – pogonsko kolo: 10.00-20 Gedpfx Aeyuh Nhebrekc Velikost kolesa – krmilno kolo: 10.00-20

Stanje: novo, as well as other types, as a package Gksdpfxjf Ddzqs Abrsc

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Gkodpfx Abody Hm Djrjc Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) Godpfx Aboh Ek Daerekc - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC Gkodpfxoiu Smbs Abrec 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: zelo dobro (rabljeno), premer struženja nad prečnim suportom: 300 mm, stružna dolžina: 510 mm, Model: 2100 LYB Krmilnik: Fanuc i Series Letnik: 2019 Premer struženja: 300 mm Dolžina struženja: 510 mm Pomik osi 'X': 205 mm Gksdpfx Abey N Uqijroc Pomik osi 'Y': 105 mm Pomik osi 'Z': 560 mm Hitrost vretena: 4500 vrt./min Moč vretena: 15 kW Navor vretena: 169 Nm Stroj opremljen z: 200 mm hidravlična glava Pogonjena orodja (1 aksialno - 1 radialno) Merilno oko za orodje Zbiralnik delov Filter oljne megle Dimenzije: 2880 x 1711 x 1921 (višina) Teža: 3900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Krauss Maffei KM 250-900B Clamping force: 250 tonnes Year of manufacture: 1987 Shot weight: 470 g Tie bar spacing: 630 x 560 mm Gkodpfx Asfp U Hvobroc

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Polavtomatski horizontalni stroj za spiralno ovijanje, zasnovan za ovijanje dolgih izdelkov, kot so les, aluminijasti profili, plastični ekstrudati, cevi, tekstil in podobni materiali. Opremljen s dovodi in odvodnimi valjčnimi transporterji za enostavno rokovanje z izdelki. Model: Robopac Compacta 12 Letnik proizvodnje: 2024 Priključna moč: 1,5 kW Premer: 1200 mm Dovodni valj: Da Odvodni valj: Da Gsdpfx Abszkf Skorskc Stanje: Novo (nerabljeno) Transportni trakovi, 2 kosa: VKLJUČENO

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M5608*10687, Leto izdelave: 2001, obratovalne ure: 35.000 h, nosilnost: 13.600 kg, dvižna višina: 5.250 mm, prosto dvigovanje: 1.750 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 3.200 mm, dolžina vilic: 2.400 mm, lastna masa: 19.321 kg, skupna dolžina: 5.455 mm, vrsta pogona: Diesel, gradbena širina: 2.550 mm, Viličar za težke tovore - Dizel Številka šasije: M5608*10687 Težišče tovora: 600 Tip droga: Triplex Gedpfx Aboyldxmerjkc Menjalnik: Clark 13.7HR32334-104 Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Prednje pnevmatike tip: zrak Prednje pnevmatike velikost: 12.00-20 Stanje prednjih pnevmatik: 80 - 100% Zadnje pnevmatike tip: zrak Zadnje pnevmatike velikost: 12.00-20 Stanje zadnjih pnevmatik: 40 - 60% Bočni pomik, nastavljiv nosilec vilic, Popolna kabina, dvojne pnevmatike,

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja višina reza: 200 mm, premer žaginega lista: 520 mm, vrtljajska hitrost (min.): 2.800 obr/min, dolžina rezanja (maks.): 420 mm, višina obdelovanca (maks.): 200 mm, dolžina podajanja os X: 420 mm, dolžinski omejevalnik: 8.800 mm, pritisk: 5 letvica, zahteva za prostor dolžina: 8.800 mm, potrebna širina: 1.200 mm, Oprema: dvostranski, Mobile saw frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 to 5960 mm, with digital LED length display, measuring length including extension approx. 8800 mm. Saw frame with 6 crank supports ensures stable standing during work. Equipped with electric power distribution and triple 230 V socket outlet. Mobile saw frame Beck ESF 1, ZS 200 saw mounted on the frame. Gsdsv Hhg Tepfx Abrjkc