Posteljni rezkalni stroj - horizontalni

HURON LU 9560

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm Godpow Iq Ugefx Agyobi - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Gbjdpfet Hwupsx Agysi Further honing machines constantly in stock – please contact us for more information.

Leto izdelave: 2009, stanje: dober (rabljeno), Lifting capacity: 30 t Precision lift Gedpfx Ageqiz N Reyebi Lifting height: 9 meters

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Turning length: 6000 mm, swing diameter over bed/support: 820 mm/515 mm, spindle bore: 128 mm, spindle speed: 1600 rpm, spindle power: 46 kW, center height: 400 mm, bed width: 560 mm, tailstock quill diameter: 125 mm, quill stroke: 280 mm, connected load: 62 kW. Machine dimensions (X/Y/Z): approx. 6500 mm / 2500 mm / 2300 mm, control system: Heidenhain, operating hours: approx. 9000 h. Includes accessories such as a steady rest. Documentation is available. On-site inspection is possible. Gbedpfxevwcwuo Agyji

Stanje: rabljeno, Leto izdelave: 2000, Grinding length: 800 mm Centre height: 150 mm Control system: FANUC Grinding wheel dimensions (max.): 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45° / -15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swivelling range: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed speed: 0 – 7.5 m/min Machine weight: approx. 4.0 t Gsdou Hag Nopfx Agysbi Space requirements (LxWxH): approx. 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including dressing diamond -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle adapters

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, IMMEDIATELY AVAILABLE – Chamber filter press by Häcker with supporting frame and 50 m³/h Abel pump for sale. Plate size: 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake thickness, capacity approx. 2700 liters, automatic plate shifting, open discharge into double-sided filtrate trough, press is ready for operation directly after installation. Abel pump was serviced by the manufacturer shortly before decommissioning. Galvanized support frame with staircase access. Located near Würzburg. Gsdjrunu Iepfx Agyjbi

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07-16 1990, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 800 mm, Na prodaj je stroj v dobrem stanju, kot je prikazano na slikah, izdelan leta 1990 in opremljen z upravljanjem NCT 90. Zelo malo uporabljen, prodaja se zaradi neizkoriščenosti. Skupna teža stroja je 33 ton. Stroj je popolnoma delujoč. Razstavljanje in transport sta odgovornost kupca. Gbsdjw Sx Agjpfx Agyji

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system: OSP-U100L Travels: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping area: 1200 x 510 mm Tool changer: 20 magazine positions Gbodpfx Agorfw Nheysi Chip conveyor

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2003, obratovalne ure: 24.000 h, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 4.100 mm, Kot upogiba (maks.): 183 °, radij upogibanja (maks.): 300 mm, debelina stene: 8 mm, Transfluid DB 2090 DB CNC Mandrel Biegezentrum für Rohre Exzellente, hochwertige Maschine aus deutscher Herstellung, Haupt-Hydraulikpumpen komplett generalüberholt und der Hauptbiegekopf vollständig revidiert. Es muss lediglich noch ein neuer Encoder installiert werden, dann ist die Maschine einsatzbereit. Ausstattungsmerkmale: – Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D Biegeradius – Steuerbare Dornrückholung (anticipated mandrel withdrawal) – Vollautomatische Positionierung von Spannbacken und Mitnehmer – Druckverstärkter Mitnehmer für enge Radien und Dünnwandrohrbearbeitung – Langer Maschinentisch mit 4000 mm über Dorn – Umfangreiches Werkzeugsortiment im Wert von über AU$150.000 inklusive Gbodpstrd T Tjfx Agyei Werkzeugliste: – 101,6 mm / 152 mm CLR – 101,6 mm / 200 mm CLR – 76,2 mm / 114 mm CLR – 76,2 mm / 200 mm CLR – 76,2 mm / 238 mm CLR – 63,5 mm / 96 mm CLR – 57,2 mm / 86 mm CLR – 50,8 mm / 76 mm CLR – 44,5 mm / 67 mm CLR – 40 x 40 mm / 120 mm CLR – 50 x 50 mm / 150 mm CLR – 60,3 mm / 150 mm CLR – 48,3 mm / 120 mm CLR

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C3300, dolžina brušenja: 4.500 mm, širina brušenja: 300 mm, dolžina mize: 4.500 mm, širina mize: 300 mm, potrebna višina: 2.500 mm, zahteva za prostor dolžina: 13.700 mm, potrebna širina: 2.500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Grinding length: 4500 mm Grinding width: 300 mm Workpiece height: 250 mm Table or grinding arm swivel range: ±90° Segment head diameter: 560 mm Spindle diameter at front bearing: 120 mm Swiveling: 2° Max. torque: 719.5 Nm Motor: B280, 55 kW Grinding spindle speed range: 0–730 rpm Gjdjtqtn Depfx Agyjbi Control: BBC Baumüller drives Marposs measuring system Hydraulic clamping Grinding mist extraction system: Hydrocyclone cleaning plant Auxiliary grinding unit ZU Feed rate: 2000–35,000 mm/min Space requirement approx. 13.7 x 2.5 x 2.5 m