Štirismerni bočni nakladalnik

Hubtex MQ45

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Duodsxak Hxopfx Apljt Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Dusdjuiy Ngspfx Aplet Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Duodpfxewwtylj Apljt Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dodatne tehnične specifikacije so na voljo na zahtevo.

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dujdpfxjwwtw Dj Apljt Dodatne informacije: 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), A Schüco profile workbench for sash hardware assembly is available. Assembly capacity: approx. 6–8 sashes/day, hardware: Schüco AvanTec, minimum pressure: 0.7 MPa, maximum air flow rate: 20 l/min, machine weight: approx. 1200 kg. An on-site inspection is possible. Dujdewwlk Nopfx Aplst

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 820505-01+02, Ref. No. 24208 + 24209 2 units – Load Turning Devices Technical Specifications: - Load capacity per ROTOMAX: 25 t - Maximum torque: 14,000 Nm - Rotation speed: 2.6 m/min - Operation via hand-held remote control with intermediate cable - Intermediate cable length: approx. 8 m - Load turning belt width: 160 mm Dedpetpbwhefx Apleut - Pin diameter for fixture: 140 mm - Power supply per unit: 400 V / 3.0 kW - Space requirement per unit: approx. W 2200 x H 1300 x D 900 mm - Own weight per unit: approx. 2,100 kg

Stanje: dober (rabljeno), Leto izdelave: 2009, v dobrem delovnem stanju, DG244/E555/1, 6 metrov Dujdjtuvg Dopfx Apljt

Leto izdelave: 2013, stanje: rabljeno, Drying chamber with intermediate ceiling ventilation and front-end wagon loading for the production and conditioning of 3 mm oak lamellae, with initial moisture content of 12 to max. 15% / final moisture content 7% Used, in good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40° C above 30% RH Year of manufacture: 2013 Duedpfx Apsvwfhielot Rated power: 7 kW / 15A Frequency: 50 Hz Control voltage: 24VDC/230VAC Protection class: IP54 Capacity: The chamber holds: - 2 packs in width, each 1.10 m, with 0.20 m spacing - 1 pack in height, 1.80 m, with 0.10 m thick supporting timbers plus a 0.10 m free space - 2 packs in length, each 2.20 m, plus 0.60 m free space The chamber contains 4 stacked packages and has a gross total volume of 17.4 m³. The net capacity is 4 m³ of wood – with a wood thickness of 3 mm and stack batten thickness of 10 mm, utilizing 90% of the width for edged timber. Usable internal dimensions per chamber: Width 2.40 m x Height 2.30 m x Length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheeting - Snow load 100 kg/m² - Double-wing swing door - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heat exchanger, 50 kW, flow temperature of 80°C, return temperature 73°C - Servo-controlled supply and exhaust air flaps - Cold water spray system - Chambers operate fully automatically - K5 computer control system Dismantling: Customer location Delivery as inspected, in current condition No warranty or guarantee

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 4.000 kg, dvižna višina: 6.000 mm, vrsta goriva: električni, tip droga: triplex, dolžina vilic: 1.200 mm, gorivo: elektrika, Brand: Combilift Model: CB40E Year of manufacture: 2024 Capacity: 4,000 kg Mast: Triplex Dedpjt Dph Aefx Aplout Lifting height: 6,000 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, številka stroja/vozila: SI73, Technical Data: 1x Demag KBK 1 column-mounted slewing jib crane, rated load 250 kg Load capacity at full outreach: 250 kg / 0.25 t Height: approx. 2.83 m Underside of jib: approx. 2.3 m Outreach: 3 m Hook height: approx. 1.85 m Total weight: approx. 400 kg including anchor plate 71x71 cm Equipped with Demag PK chain hoist, 250 kg lifting capacity Including pins, cable trolley, trolley, end cap, etc. Dodpjwv N Ezofx Aplsut Slewing range: 300°, connection: 400 V / 16 A Crane is dismantled and available immediately Location: 75053 Gondelsheim More cranes available, capacities 80–5000 kg – please inquire See photos Shipping via freight carrier or collection by appointment only