Stranski nakladalnik

Hubtex ESTL2.0-4B

Stanje: novo, Leto izdelave: 2025, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Hfjdpjk H Ic Ujfx Ab Tsr Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: pripravljen za uporabo (rabljen), Prodam tračni transporter, viden na fotografijah, dolžina 17,5 m. Širina traku 0,6 m (novi trak). Možnost prevoza. Hsdpfx Abjr Nvx Us Tofr

Stanje: dober (rabljeno), Leto izdelave: 2002, obratovalne ure: 5.900 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 74343, delovna širina: 1.350 mm, dolžina brusnega traku: 2.620 mm, širina brusilnega traku: 1.370 mm, Širokopasovni brusilni stroj Bütfering Optimat SBC 313 Letnik izdelave: 2002 Model: Optimat SBC 313/QCE/Classic - s 3 agregati (podrobnosti na priloženi sliki) - brušenje od zgoraj Delovna širina: 1350 mm Širina brusnega traku: 1370 mm Dolžina brusnega traku: 2620 mm Hjdpfoqvl D Hox Ab Tjfr Širina prečnega brusnega traku: 150 mm Dolžina prečnega brusnega traku: 4700 mm Natančnejše informacije so na fotografijah.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Hfsdpfx Abomhhf Se Tjr - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: novo, The manufacturer Zambelli Metalltechnik GmbH & Co. KG will discontinue support for all paternoster and storage lifts as of 31 December 2023. After this date, the company will no longer provide support or spare parts. Hfodpfsiy Dw Hjx Ab Ter LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these units. Please feel free to contact us at any time.

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), A shredder manufactured by Gross Apparatebau GmbH, previously used in the wood industry, is available. Feed opening (X/Y): 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm–40mm, extraction nozzle diameter: 160mm, machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation is available. On-site inspection possible. Hfodpou Nlkxofx Ab Tsr

Leto izdelave: 2024, Stanje: novo, Roboterportal-System für das Schneiden von Blech und Profilen 3D-Roboterportal-Anlage für Plasma- und Autogen-Brenn­schneiden mit beidseitigem Antrieb sowie präzisem Positioniersystem über Zahnstangen und Ritzel auf allen drei Linearachsen – für außergewöhnliche Geschwindigkeit und Dynamik. Spielfreie Drehachsen ermöglichen die 4-seitige Bearbeitung von Profilen und Rundrohren. Präzisionsgetriebe mit minimalem Spiel, dynamische Kopplung der Antriebsmotoren an die Zahnstangen sowie ein verwindungssteifes Führungssystem gewährleisten sanfte Bewegungsabläufe sowie exzellente Schnittqualität – auch bei Ecken und kleinen Bohrungen. Das Portal verfügt über einen auskragenden Teil des Querträgers, der das Schneiden von Profilen in einer eigens dafür konzipierten Kabine ermöglicht. Verfahrweg Querachse (Y-Achse): auf Anfrage Verfahrweg Längsachse (X-Achse): auf Anfrage Verfahrweg Vertikalachse (Z-Achse): 1500 mm Verarbeitbare Träger- & Profiltypen: T-, L-, H-, U-Profile, Rechteck- und Rundrohre Maximale Trägerabmessungen: Breite bis 1200 mm Rechteckrohre: Hodoh I Nw Dopfx Ab Tefr Querschnitt bis 600 x 600 mm HAUPTMERKMALE ▪ Robuste Stahlbauweise mit präzisen Linearführungen und Servoantrieben mit Zahnstange und Ritzel auf allen Achsen; ▪ Hohe Dynamik auf X-, Y- und Z-Achse: Verfahrgeschwindigkeit bis 30 m/min, Beschleunigung bis 3 m/s²; ▪ 3D-Steuerung über sieben Achsen ermöglicht ein fortgeschrittenes CNC-Programmierniveau; ▪ Maximale Maschinenauslastung dank kombinierten Blech- und Profilbearbeitungskonzeptes – 100% Nutzlast bei Wechseln, ohne Stillstandszeiten beim Be- und Entladen von Blechen, Profilen und Schnittteilen. ▲ PLASMASCHNEIDTECHNIK HYPERTHERM – auf Anfrage ▲ INSTALLATION UND SCHULUNG INKLUSIVE Installations- und Schulungsdauer ca. 15 Tage

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Hfsdpfx Aemhhypsb Ter We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, The subject of my auction is a belt conveyor with a length of 10.5 m and a belt width of 0.65 m. Possibility of transport. Hfodsw Dx Syspfx Ab Tsr

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, številka stroja/vozila: CA90H2 PIPE BENDING ROLL, premer gredi: 90 mm, premer valja: 260 mm, vrtljajska hitrost (min.): 8 obr/min, največja hitrost vrtenja: 8 obr/min, skupna masa: 1.000 kg, skupna dolžina: 1.260 mm, skupna širina: 1.000 mm, skupna višina: 1.260 mm, moč: 3,68 kW (5,00 KM), vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, obratovalna hitrost: 8 mm/s, premer valja: 260 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, PROFILBIEGEWALZEN, WELLEN-AUSGANG 90 MM – ROHRBIEGEWALZE MARGI CA90H2, BAUJAHR 2007 WELLEN AUSGANGSGRÖSSE: 90 MM SATZ UNIVERSALWALZEN, DURCHMESSER 260 MM Hodpfxowkrr To Ab Tefr SEITLICHE RICHTWALZEN LINKS/RECHTS, SCHRAUBENVERSTELLUNG 4 WALZENSÄTZE FÜR ROHRBIEGEN: 61 – 78 – 90 – 116 MM KONSOLE ELEKTRISCH FAHRBAR AUF ROLLEN, ALLE BEDIENELEMENTE ZENTRALISIERT DIGITALE ANZEIGE DER WALZENPOSITION OBERE WALZE ANGETRIEBEN, ELEKTROMOTOR MIT GETRIEBE SEITENWALZEN HYDRAULISCH EINZELN VERSTELLBAR MIT KOLBEN MASCHINE REVERSIERBAR – BETRIEB MIT WELLEN VERTIKAL/HORIZONTAL MÖGLICH SICHERHEITS- UND NOT-AUS-AUSRÜSTUNG AN DER MASCHINE INSTALLIERT BEDIENUNGSANLEITUNG UND SCHALTPLAN IM ORIGINAL MIT DER MASCHINE GEWICHT: 1.000 KG ABMESSUNGEN: 1.260 X 1.000 X H 1.260 MM