Tiskanje paketov

HSM V-PRESS 1160 VERTICAL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, | Model | Lokomo C-140B Čeljustni drobilnik | | Vhodna odprtina (širina × višina) | cca 1400 mm × 1000 mm | | Največja vhodna velikost kosa | cca 600-800 mm | | Trdnost materiala za drobljenje (npr. kamenina) | ~200 MPa (odvisno od materiala) | | Zmogljivost (pretok) | ocenjena 400 t/h | | Moč motorja | 200 kW | Lodpfx Ahoxcg Spj Aeak | Težnostni razpon | 55 ton |

Stanje: pripravljen za uporabo (rabljen), Stožčasti drobilnik Svedala Znamka: Svedala Lodepn I H Tspfx Ah Asak Tip: 36/H/MC Vključuje: osnovno šasijo in oljno enoto

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted Lsdpfx Asvwlqqoh Aoak - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 1982, Stanje: dober (rabljeno), številka stroja/vozila: 14320, baling press / paper baler Laodpfx Aoiuky Ish Ajk

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Ljdpfx Ahjh Nyfys Aeak Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495.

Leto izdelave: 2022, obratovalne ure: 20 h, Stanje: kot nova (razstavni stroj),

Leto izdelave: 2006, Stanje: skoraj kot novo (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: nepreverjeno, skupna masa: 18.000 kg, moč: 250 kW (339,91 KM), Za kosovni odpad, palete, ostanke lesa itd. Enovretenski rezalnik z elektrohidravličnim pogonom Širina rotorja: 2500 mm Premer rotorja: cca 500 mm Elektromotor: 250 kW Lodpjq I Rkdofx Ah Aoak

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Rabljeni enojni nihajni čeljustni drobilnik 1300 x 900 mm, vključno z rezervno gredjo in ležaji FAG 23152 K MB C3. Leto izdelave in proizvajalec nam nista znana. Drobilnik je do leta 2023 deloval brez težav, nato pa je bil zamenjan z mobilno napravo. Lajdpfxjwmgw Ne Ah Ask

Stanje: pripravljen za uporabo (rabljen), Balirni stroj Hsm HL 4809 LI - Velika odprtina za polnjenje, idealna za velike škatle - Posoda s prekucnikom za enostavno polnjenje Pritisna sila v kN: 480 - Napetost/frekvenca: 3 x 400 V / 50 Hz Ljdpora Dddjfx Ah Aoak - Teža bale v kg (odvisno od materiala): do 400 kg - Dimenzije bale dolžina x širina x višina v mm: 1200 x 1100 x 750 - Dimenzije stroja dolžina x širina x višina v mm: 5648 x 1849 x 2515 Trajanje praznega cikla v sekundah: 53 - Ročno vezanje: 4-krat z žico