Stiskalnica za bale

HSM 4812

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna širina: 2.583 mm, skupna višina: 3.994 mm, skupna dolžina: 6.661 mm, Oprema: dokumentacija / priročnik, HSM VK 4812 P Year of manufacture: 2015 Fully automatic baler. The machine has undergone service and maintenance by an authorized HSM Service Center based in Germany. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Overall length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Processed materials: film, mixed paper, cardboard, punching waste Bale tying: 4-fold wire binding We also have other balers in stock. Transport costs depend on weight, volume, and especially distance. For inquiries, the following information is required: delivery address (postal code and city). For further details, a telephone conversation is necessary. Therefore, please inquire about transport costs and other shipping options by contacting us by phone. Our contact details can be found in the seller’s legal notice. We sell and export worldwide and, thanks to our very large storage capacity, can supply large quantities quickly and flexibly. We issue intra-community invoices – VAT-free. Business hours: Mon-Fri: 8:00 am–4:00 pm Kedpfoxx N Hzex Abhend Sat: closed

Stanje: novo, NUOVO CASSONE SCARRABILE, lunghezza esterna 4200 mm, larghezza esterna 2280 mm, altezza sponde 600 mm, dotato di sponda posteriore a bandiera, pianale in acciaio da 4 mm, sponde divisibili in alluminio TR30. Kedperwl Nvofx Abhsnd

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), lastna masa: 12.000 kg, volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours, as of August 2025 Pressing Force (Main Press): 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput Rate: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Capacity at a Bulk Density of: - 20 kg/m³: up to 6 t/hour, depending on material Kjdpfx Ajvtpq Hjbhend - 50 kg/m³: up to 13 t/hour, depending on material Bale Weights: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Operator Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Type: HVI 46 Machine Installation Dimensions (with bale chute): 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (baler only): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (baler): approx. 12 t Scope of Supply: - HSM VK 4812 channel baler, without hydraulic oil, without conveyor equipment - Two wire reel boxes for 8 x 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and potential-free contacts for external control. Operation from the control cabinet is on the left in pressing direction; the needle unit is on the right side and can be folded back for transport. The machine has been partially overhauled and tested in our workshop – please see the photos. Documentation (operating instructions, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment. No liability for technical specifications or possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 20.580 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 450 kg, vhodni tok: 59 A, skupna masa: 12.000 kg, transportna višina: 2.750 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), transportna širina: 2.300 mm, transportna dolžina: 8.500 mm, kapaciteta rezervoarja: 300 l, Good day, We are pleased to offer you, without obligation, a used baler manufactured by HSM, model VK 4812. The following technical data has been taken from the manufacturer's operating manual and brochures, for which we do not assume any responsibility for accuracy or completeness. Manufacturer: HSM Model: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Main press force: 48 t Drive power: 30 kW Machine weight (press): 12 t Knsdpfx Aet H Rcaebhjd The machine documentation is available in German. An inspection can be arranged by appointment at our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2024, Technical Specifications of the Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: 30 kg/m³: 6 to 7 t/hour 50 kg/m³: 7 to 9 t/hour 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspaper): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC control: Telemecanique TSX Micro Knedpfx Aju Thhrobhod Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel guideways welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, new oil filled - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Menu language set to English in the program - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for the flap replaced - Electrics of the wirbulator renewed, connected, and tested Press ram: - All four guide rollers of the press ram removed and replaced - Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder barrel honed, complete seal set replaced, leak test carried out - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder barrels honed, complete seal sets replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister fingers replaced - Two twister shafts replaced - All 8 wear plates on the twist mechanism under the twister fingers replaced Scope of delivery: Only the baler is being sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment. We assume no liability for the technical details or possible errors.

Leto izdelave: 2025, Stanje: novo, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Knsdpfxjg Ay Dhe Abhed

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Kodpfx Abeic Rl Dehend Year of manufacture: 1985 Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed.

Stanje: skoraj kot novo (rabljeno), 1500 m² Schäfer R3000 Mezzanine Warehouse Platform, 3-Tier Used – Excellent condition, like new, see photos. Ground floor: mezzanine platform, steel construction. Above: 2 levels of Schäfer shelf/rack system. Manufacturer: SCHÄFER R3000 CAD planning and assembly 3-tier structure Knedpfxjhzw His Abhjd Partial sale possible. Negotiation price: on request! Item in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available on request. Constant stock of over 5,000 linear meters of pallet racking from various manufacturers. (Subject to changes, errors in technical details, specifications and prices, as well as prior sale! See our Terms and Conditions. All prices excl. VAT, ex stock.) Purchase / Sale: We constantly buy and offer various items from many sectors. • Swept-clean dismantling of facilities • Company liquidations • Fast, flexible, decisive! We also clear and/or dispose for insolvency administrators. Send us a brief description and we will reply promptly. To visit our website, please click on our logo!

Leto izdelave: 2024, Stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Knsdpfeff Sbiox Abhjd Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH Ksdjvgrh Uepfx Abhend