Stiskalnica za bale 100 t s transportno tehniko VK 8818 R-FU

HSM GmbH + Co. KG, Deutschland VK 8818 R-FU

Technical Data – Baler:
Manufacturer: HSM GmbH + Co. KG, Germany
Model: VK 8818 R-FU
Year of Manufacture: 2015
Operating Hours: 19,750 hours (as of July 2025)
Number of Bales Produced: 24,760 bales (as of July 2025)
Main Press Force: 1,000 kN
Specific Press Force: 120 N/cm²
Shear Edge Ejector Force: 121 kN
Insertion Chute Dimensions: 970 x 1,800 mm
Theoretical Cycle Time (idle): 8.3 seconds
Theoretical Throughput: 643 m³/hour
Bale Dimensions: 1,100 x 750 mm; length variable from 600 to 2,000 mm
Drive Power: 2 x 45 kW, frequency-controlled
Connected Load: 110 kW
Total Power Consumption: 213 A
Fuse Protection: 250 A slow-blow
Tying: 5-fold horizontal, fully automatic
Throughput Rates for a
Bulk Density of 20 kg/m³: 12.86 t/hour
Bulk Density of 50 kg/m³: 32.15 t/hour
Bale Weights (at approx. 1.2 m bale length): 650 to 750 kg/bale, depending on material
Hydraulic Oil Tank Volume: 2,000 L HVI 46
PLC Control: Siemens S7-300
Control Panel: Siemens TP 700
Baler Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H)
Installation Dimensions with Conveyor Technology: 35,000 x 8,480 x 7,745 mm (L x W x H)
Weight of Baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t)

Special Machine Features:
- Access interlock via key transfer system
Crjdpsxb Dvvsfx Agtsh
- Electro-hydraulic locking of the press carriage during tying, ensuring the press ram does not shift with highly expansive materials

Additional Optional Equipment Ordered:
- Frequency-controlled main drive 2 x 45 kW, offering up to 40% energy savings compared to standard 2 x 45 kW motorization, with the same performance output
- Manual selection/deselection of wire tying for non-expansive materials, saving tying wire
- Shear-edge ejector with 121 kN pressing force
- Sensor-based wire monitoring with automatic press shutdown on wire break or end
- Bale chute
- Visual warning signal mounted on the control cabinet

Condition of the Baler:
The complete baling system (baler and conveyor technology) is in good, operational condition, regularly cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator.

Technical Data – Chain Belt Conveyor:
Manufacturer: Stadler Anlagenbau GmbH
Model: Chain Belt Conveyor KF 1800
Year of Manufacture: 2015
Belt Speed: 0.36 m/s
Input Belt Length: 7,000 mm
Inclined Belt Length: 14,500 mm
Gooseneck Length: 1,550 mm
Incline Angle: 30°
Nominal Width: 1,800 mm
Usable Width: 1,638 mm
Overall Conveyor Height: 7,745 mm
Pit Dimensions for Conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H)

Scope of Delivery:
For sale are the input conveyor, the transverse distributor belt, and the baler—including bale chute, but without wire pulling stations and without wire.

Notes:
The full documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or potential errors.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.