Stroj za ščetkanje / Stroj za strukturiranje

HOUFEK Twingo 300

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Fedpfsqu N U Dox Abropn Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar

Stanje: novo, Leto izdelave: 2025, Butt-Schweißmaschine Fodpfx Abjtwfv Dsrjpn Technische Daten: Modell: KAB10 CE-zertifiziert Bedienung: Fußpedal Leistung bei 50% ED: 10 kVA, Dauerleistung: 7,1 kVA Schweißkapazität: bis 8 mm + 8 mm Stahldraht (unlegiert) Primärwicklung: Kupferdraht Sekundärwicklung: Kupferschiene Kern: Siliziumstahl-EI-Kern Netzanschluss: 400V/50Hz Netzzuleitung: 3 m Schutzklasse: IP21 Platzbedarf (B/T/H): 625 mm x 600 mm x 1035 mm Gewicht: 90 kg Garantie: 1 Jahr (+10 Jahre Ersatzteilversorgung)

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): Fsdpfxjgwbbqs Abrspn No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Leto izdelave: 2021, stanje: novo, Aluminum incline conveyor belt including substructure Inclined section starting from 50mm (adjustable) Discharge height 1500mm (adjustable) Conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt including carriers and corrugated edge Drive: Motor 0.25KW (adjustable), Speed 0.3m/sec Connection 220/240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Corrugated edge: 40x35mm (adjustable) T-20 cleats – 400mm spacing (adjustable) 2-ply, particularly cross-stable Our core competence is providing customers with exactly what they really need. Fodpfxjhh Dbas Abrjpn We work closely with our customers to develop tailored, individual solutions and supply corresponding systems from our own production. Contact us by phone for a suitable solution for your application. Conveyor, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Equipment and technical data: · Wheel diameter: 600 mm · Blade speed: 1,550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Max. blade length: 4,735 mm · Min./Max. blade width: 15 mm / 30 mm · Min./Max. blade width with special coating (optional): 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction port: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Robust German engineering · Modern, attractive, torsion-resistant double-chamber welded steel frame · Top and bottom doors secured by limit switches Fjdpfx Absw Nabljrjpn · Upper and lower precision bandsaw blade guides APA 2, size 2 · Finely planed grey cast iron table · Table tiltable up to 45° · Dynamically balanced bandsaw wheels with vulcanised rubber tyres · Rip fence usable on left side of blade; fence profile foldable · Blade tension indicator · 1 pc. saw blade 4735 x 25 x 0.6 mm, tooth pitch 9 mm, No. 3780.250D · Mechanical blade guard height adjustment by handwheel with locking ratchet · From 2.2 kW – rotary cam switch with direct start and emergency stop button · From 3.0 kW – rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE compliant incl. transport pallet incl. delivery to 65239 Hochheim Availability: short-term Location: Flörsheim

Stanje: dober (rabljeno), Koda: 0370 Znamka: HAFFNER - NEMČIJA Model: DGS 187 - CE standard Dvoglava kotna žaga z nagibnima reziloma za rezanje lesa, aluminija, PVC in različnih materialov – v skladu s CE standardom Tehnični podatki: Premer rezil: 500 mm, izvrtina 30 mm Št. motorjev: 2 x 2,2 kW – 2.800 vrt/min Maksimalna dolžina reza: 3.400 mm Minimalna dolžina reza: 230 mm Nagib rezil: 45° - 90° Elektronsko nastavljanje dolžine reza na levi rezalni enoti Hidropnevmatsko pomikanje žage Fpjdpfx Absuiwqhorsn Pnevmatsko vpenjanje obdelovanca Kontrolna plošča z dvojnimi gumbi Elektronski programator za pozicioniranje glave Št. priključkov za odsesavanje: 2 x Ø 120 mm Delovni tlak: 6 bar (stisnjen zrak) Dimenzije (DxŠxV): 4.600 x 1.300 x 1.650 mm Teža: 550 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Fodpfxsx Ah A As Abrepn Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text Fpodpfxoxwaz Ho Abrjn OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Fodpsv R U Ifjfx Abrjpn Working height: 250 mm 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Both units with oscillation: yes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Pnevmatska stiskalnica za lepljenje lesa po debelini. TECHFA tip PTD 6000 Maksimalne dimenzije lepljenih elementov: - dolžina 6300 mm - širina 160 mm - višina 850 mm Stiskalnica razdeljena na 4 sekcije. Fodpfsyivr Hex Abrspn