Obdelovalni center
HOMAG OPTIMAT BAZ222/60/K

Leto izdelave
2010
Stanje
Rabljeno (popolnoma funkcionalen)
Lokacija
Nordrhein-Westfalen Nemčija
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
Obdelovalni center HOMAG OPTIMAT BAZ222/60/K
YouTube video
HOMAG OPTIMAT BAZ222/60/K
HOMAG OPTIMAT BAZ222/60/K
HOMAG OPTIMAT BAZ222/60/K
HOMAG OPTIMAT BAZ222/60/K
HOMAG OPTIMAT BAZ222/60/K
HOMAG OPTIMAT BAZ222/60/K
HOMAG OPTIMAT BAZ222/60/K
HOMAG OPTIMAT BAZ222/60/K
HOMAG OPTIMAT BAZ222/60/K

Podatki o stroju

Opis stroja:
Obdelovalni center
Proizvajalec:
HOMAG
Model:
OPTIMAT BAZ222/60/K
Leto izdelave:
2010
Stanje:
pripravljen za uporabo (rabljen)
funkcionalnost:
popolnoma funkcionalen

Tehnične podrobnosti

Dolžina obdelovanca (maks.):
6.175 mm
Širina obdelovanca (maks.):
1.550 mm
Višina obdelovanca (maks.):
300 mm
Največja hitrost vretena:
24.000 obr/min

zagotovitev

Lokacija:
Nordrhein-Westfalen, Nemčija Nemčija – Razdalja: pribl. 777 km
Razpoložljivost:
takoj po zaključku dražbe
Dobavni pogoji:
FCA
Stroški demontaže in nakladanja:
1.000,00 € (zavezujoče)
Prevzem na lokaciji:
brezplačno
Stroški pošiljanja:

Opis

Delivery: FCA – Lifting gear must be provided by the buyer – can be rented from Homag

TECHNICAL DETAILS
Workpiece length: max. 6,000 mm (single), max. 2,375 mm (pendulum)
Workpiece length with tool Ø 25 mm: max. 6,175 mm (single), max. 2,550 mm (pendulum)
Workpiece width front: max. 1,150 mm (all units)
Workpiece width front for milling with tool Ø 25 mm: max. 1,220 mm
Workpiece width front when gluing: max. 1,220 mm
Workpiece width rear: max. 1,400 mm (all units)
Workpiece width rear for milling with tool Ø 25 mm: max. 1,550 mm
Workpiece width rear when gluing: max. 1,475 mm
Workpiece width rear with standard flush milling and gluing: max. 1,500 mm
Workpiece thickness: max. 300 mm including clamping devices (router)
Workpiece thickness with standard clamp: max. 60 mm
Workpiece thickness: min. 12 mm (chamfer milling)
Workpiece thickness: min. 16 mm (radius milling or min. 2 x radius + 10 mm)


Spindle and tool changer
Main spindle: 15 kW, HSK F63
Spindle speed: 24,000 rpm
C-axis: with aggregate interface
Carousel tool changer: 18 positions, D = 130 mm
Tool weight: max. 6 kg
Tool weight incl. holder for aggregates: max. 10 kg


Drilling head
Spindles: 30 (V20 / H10 / S360° "MPU")
Drilling head motor: 2.7 kW, frequency-controlled
Speed: max. 7,500 rpm
Vertical spindles: 20, high-speed, arranged in U-shape (3 rows with 11, 3, and 6 spindles)
Horizontal spindles: 10, arranged in pairs (4 pairs, pitch 32 mm, 1 pair pitch 320 mm)


Sawing and milling
Grooving and dividing saw: saw blade Ø max. 200 mm
Add-on milling spindle for drilling head: 6 kW (at S6 operation)


FLEX-5
FLEX-5 sawing, milling, drilling unit: for tool changer
C-axis extension for FLEX-5 unit: coupling element for C-axis


Edgebanding unit
Edgebanding unit POWER EDGE: For edging straight workpiece edges with edge material
Edge height: max. 105 mm (edgebanding unit BAZ222/322)
Workpiece thickness for edgebanding: max. 100 mm


Additional units
Flush milling unit: for tool changer
Combi flush milling-scraper unit: WD 100 mm
Combi trimming and corner rounding unit: sensor-controlled
Lock case milling unit: 2 spindles, D = 16/20 mm



EQUIPMENT
- with edgebanding unit
- with FLEX-5 unit
- Chip conveyor: for B200/52-72
- LED position display: console 1,300–1,600 mm
- LED position display for precise workpiece handling
- Extended workpiece machining capabilities thanks to flexible unit system
- without tools

The technical data and descriptions are based on the transcript of the original order confirmation. Data is for information only and not binding.



Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Obdelava plačil

dodatni stroški nakupa:
18 %
Plačilni pogoji:
100 % predplačilo
Načini plačila:
Vorkasse Überweisung Iconbančno nakazilo
Mastercard LogoVisa LogoCartebleue LogoKlarna LogoiDeal Logo
Račun se izdaja v višini najvišje ponudbe, pri čemer se prištejejo morebitni stroški demontaže/nakladanja, stroški pošiljanja ter dodatni stroški nakupa in zakonski DDV.

Podrobnosti ponudbe

ID ponudbe:
A17749876
Št. reference:
AUC-2411073
Nazadnje posodobljeno:
dne 19.11.2024
Ekskluzivna ponudba:
na voljo samo na dražbi

Stik

Cedric Schuhmann
Kontaktna oseba: Cedric Schuhmann
ID stroja: 17749876
SiegelSiegel

Zaščita kupca Machineseeker

Varno plačilo prek fiduciarniega računa
Strogo preverjeni prodajalec
Osebna in večjezična podpora
Izplačilo kupnine se izvede šele po predaji blaga.

ogled

Možen ogled
Maschinensucher na splošno priporoča ogled rabljenih strojev.
Vsi podatki so vneseni po najboljšem vedenju in vesti – prepričajte se na kraju samem.

Ponudnik

Trustseal
Profesionalni komercialni prodajalec
Od 2004 pri Machineseeker
Nordrhein-Westfalen Nemčija Nemčija
Razdalja: pribl. 777 km

Tukaj bi lahko stala vaša naprava

Dražba s številko 1

Prodate v samo nekaj tednih!
Prodajate po najvišji ceni!
Prodajate brez fiksnih stroškov in tveganj!
ali pokličite +49 201 857 861 10
Razpravljati o sodelovanju

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

  1. Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
  2. All prices and bids are net prices and do not include VAT.
  3. Stated dismantling and loading costs are binding.
  4. All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
  5. Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
  6. The duration of an auction may be subject to change.
  7. By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
  8. Submitted direct or maximum bids are binding.
  9. Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
  10. The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
  11. In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
  12. The General Auction Terms of Machineseeker Group GmbH apply.