Linija za pakiranje in paletiranje

HOMAG

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Iodpsyqybujfx Adkotd Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Leto izdelave: 2025, stanje: novo, Avtomatski podajalnik palet je hrbtenica vaših avtomatizacijskih procesov. Napolnjen je lahko z do 10 euro paletami (1200x800 ali 1200x1200), kar odpravlja potrebo po ročnem pripravljanju posameznih palet, prihranek časa in zmanjšanje fizične obremenitve zaposlenih. Namesto tega enota palete izdaja s pritiskom na gumb ali s prednastavljenim algoritmom na motoriziran valjčni transporter, ki jih transportira za nadaljnjo obdelavo. Model PD-10 se lahko uporablja v povezavi z različnimi rešitvami za paletizacijo. Sprejme do 10 euro palet Polni se z viličarjem Isdpfx Aohbg Uxjdkstd Zmanjšuje fizično obremenitev Povečuje učinkovitost

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer Itedsyqx U Hepfx Adkjd MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverse beams: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Iedpfxeyttf Sj Adkstd Total installed power: 19 kW CNC controller model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: rabljeno, Tiskarski sistem: Neprekinjen / Kalander Glavni dobavitelji: Bison / Berstorff Projektirana kapaciteta: 160 m³/dan Dosežena kapaciteta približno: 200 m³/dan Efektivni delovni čas: 23 h/dan Referenčna debelina: 3,2 mm Maksimalna bruto širina plošče: 2500 mm Maksimalna neto dolžina plošče: 2440 mm Maksimalna neto širina plošče: Nepomejeno Minimalna neto širina plošče: 1220 mm (razrez) Minimalna debelina plošče: 2,0 mm Maksimalna debelina plošče: 10 mm Itodpfx Aoul H Nmjdked Električni sistem: 380 V, 50 Hz Leto izdelave: 1985 Glavne nadgradnje: 2007–2009, 2016 Obratovanje do: maj 2018

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Spindles Number of Spindles for Vertical Drilling: 20 Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Itjdpfx Asyttcwedked Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking Ijdpfjytr Hbex Adketd The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: dober (rabljeno), Traypacker / Wrap-around-Verpacker Trays und Wrap-around-Kartons Iodpfxefxypie Adkotd Mindestverpackungsgröße L x B x H = 190 x 140 x 80 mm Maximalverpackungsgröße L x B x H = 460 x 350 x 250 mm 4-bahnige Maschine. Die Hotmelt-Anlage wurde 2018 überholt. Siemens S7 SPS-Steuerung, einfacher Formatwechsel. Verkauf im Ist-Zustand oder angepasst an Kundenanforderungen.

Stanje: zelo dobro (rabljeno), PC-krmiljenje Power Control PC85T Programska oprema WoodWOP + TOPDRILL Št. 2 prehodnih motoriziranih transportnih trakov Št. 2 horizontalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 1 vrtalna enota za vsak horizontalni vrtalni nosilec (1 x 1,5 kW) Št. 21 vreten za vsako horizontalno vrtalno enoto Največja delovna širina (mm) 2500 Najmanjša delovna širina (mm) 250 Št. 4 spodnji vertikalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 2 vrtalni enoti za vsak spodnji vertikalni vrtalni nosilec (2 x 1,5 kW) Itedsyv Ev Aspfx Adked Št. 4 zgornje vertikalne vpenjalne enote za obdelovance Transportni trak za odvoz odrezkov Skupna priključna moč (kW) 35

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 1.200 mm, skupna dolžina: 3.600 mm, skupna širina: 1.480 mm, - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes - └ Type of documentation: Technical data, electrical schematics, user manual, operating system - └ Language: NL - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs.]: 8 - └ 1st unit type: - - Tools included: Yes - └ 3rd unit type: - - Tools included: Yes - └ 4th unit type: - - Tools included: Yes - └ 5th unit type: - - Tools included: Yes - └ 6th unit type: - - Tools included: Yes - └ 7th unit type: - - Tools included: Yes - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Transport packages [pcs.]: 4 Financial Information Itsdpsx Ei Sysfx Adksd VAT: The indicated price is plus VAT. VAT/margin taxation: VAT deductible for businesses. Delivery and trade-in possible at any time for all items in the industrial sector. Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° Itjdpfxsh E Sghj Adkjd X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: rabljeno, Leto izdelave: 2018, skupna višina: 1.650 mm, skupna dolžina: 4.400 mm, skupna širina: 1.000 mm, Price: On request - Special features: - Description: The machine currently has a fault that needs to be fixed - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units: 9 - 1st unit type: - Tools included: Yes - 3rd unit type: - Tools included: Yes - 4th unit type: - Tools included: Yes - 5th unit type: - Tools included: Yes - 6th unit type: - Tools included: Yes - 7th unit type: - Tools included: Yes - 8th unit type: - Tools included: Yes - 9th unit type: Ijdpfx Adoyvf Nbokotd - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (L x W x H) - Number of transport packages: 1 Financial information VAT: The listed price is exclusive of VAT VAT/margin scheme: VAT refundable for businesses Delivery and trade-in possible at any time for all types of industrial equipment Yorick Diebels

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Moving platen (workpiece), static workhead – horizontal platen (workpiece) Control: PowerControl PC86 powerTouch (woodWOP software) Safety enclosure for the working head 2 workpiece clamping cylinders within the working area WEEKE pre-positioning unit for rapid positioning of workpieces in machines with clamping grippers. Support table (workpiece support) at infeed – outfeed table (with powered conveyor belt) With automatic plate pusher Itsdpfxsyu S I Ij Adkjd Minimum workpiece dimensions (X-Y-Z): 200 x 70 x 8 mm (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z): 3000 x 1000 (option 1300) x 80 mm (2 x 40 mm) Simultaneous processing of two workpieces (in Z-axis) With separate electrical and control cabinet WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW - 42 Independent vertical drilling spindles (drilling head power 2.3 kW) - 10 Independent horizontal drilling spindles (8 in X, 2 in Y) - 1 Grooving saw unit (pivotable 90° in X-Y direction), blade diameter: 125 mm - 1 Vertical main spindle (milling unit) ETP (vertical main spindle power: 6 kW) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW - 42 Independent vertical drilling spindles (drilling head power 2.3 kW) - 10 Independent horizontal drilling spindles (8 in X, 2 in Y) - 1 Grooving saw unit (pivotable 90° in X-Y direction), blade diameter: 125 mm - 1 Vertical main spindle (milling unit) ETP (vertical main spindle power: 6 kW)

Stanje: novo, Kompletna linija za proizvodnju paleta. Broj/Pozicija Kataloški br./Naziv/Količina 1/OKKR-100/Opti-Cutter Magacin/L=3000mm/1 2/RON120/Karusel za doziranje blokova/1 3/OM-1500EL/Automat za letve/1 4/LP-OM/Sistem za pozicioniranje letvi/1 5/D-1000EL/Automat za paletne daske/1 Iodowduudopfx Adkotd 6/KTR-1006/Lančani transporter L=6000/1 7/GRG/Portalni robot s mehaničkim hvatačem/1 8/SMS-1000EL/Mašina za sklapanje/1 9/HKR/Automatska mašina za odsecanje uglova/1 10/KTR-1004/Lančani transporter L=4000/1 11/ROB-G/Robot s mehaničkim hvatačem/1 Prosečan kapacitet: 1500 paleta/8 sati (paleta 800x1200 mm sa maksimalno 6 paletnih dasaka) Maksimalni kapacitet: 1900 paleta/8 sati (paleta 800x1200 mm sa maksimalno 6 paletnih dasaka)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Specifikacija: Dolžina reza: 4300 mm Širina reza: 4300 mm Izmet žaginega lista: 80 mm Upravljalni zaslon na desni strani Delovna miza stroja popolnoma zračno oblazinjena Hitrost programskega prislona naprej: 25 m/min Hitrost programskega prislona nazaj: 90 m/min Standardne spone: 225, 325, 475, 775, 1075, 1825, 3425 mm Power Concept – omogoča sočasno rezanje več trakov z različnimi dolžinami prečnega reza z do 40 % večjo zmogljivostjo Nadzor višine pritisne letve Hitrost vozička žage: 130 m/min Glavni motor žage: 11 kW s pnevmatskim dvigom Predrezovalna enota: 1,5 kW s pnevmatskim dvigom Elektronska nastavitev predrezovalne žage preko upravljalnega zaslona 4 zračne mize: 2160 x 650 mm Tiskalnik etiket 400 V, 50 Hz Upravljalni zaslon na dotik Control Touch Prenos podatkov prek omrežja in USB priključka Isdpjyuw Umefx Adkstd CE Eco Plus tehnologije omogočajo do 20 % prihranka energije