HOMAG KBZ KFR20 / KFR526

HOMAG KBZ KFR20 / KFR526

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg Ppodpfx Afequ N U Djaju 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): Ppsdpfxsd Nt Rqs Afaeu - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Leto izdelave: 2009, stanje: dober (rabljeno), • Fully automatic Ppjdpepu Anmofx Afasu • Maximum package height (mm): 650 • Minimum package height (mm): 15 • Maximum package width (mm): 1250 • Minimum package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Discharge table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Na voljo je stroj za nanašanje z valji Bürkle, vključno z odlagalno mizo Bürkle LZU 800. Delovna širina: 700 mm, največja mehanska podajalna hitrost: 120 m/min, nazivna podajalna hitrost: 25 m/min, največja višina obdelovanca: 80 mm, razpon delovne višine: 880 mm–920 mm, dolžina odlagalne mize: 4000 mm, delovni čas: pribl. 1233 h. Pribor: dva originalno zapakirana rezervna valja Bürkle. Dokumentacija je na voljo. Možen je ogled na lokaciji. Ppodpfx Asxtfgyjfaou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, I am selling a double-sided through-feed CNC machining center Biesse Skipper 100. Year of manufacture: 2006. Very productive and fast. Automatic infeed table. Working length: 90–3000 mm Working width: 70–1000 mm Working height: 8–60 mm Configuration per side: Milling head: 3.5 kW, 7,000–18,000 rpm 29+8+2 drilling heads 1 slotting saw Ø 150 mm, X-direction Software: BiesseWorks. CD included. Condition: Very good! Fully functional. Automatic central lubrication system and extraction hoods. Pedpfxjhlhigj Afajpu Complete with safety barriers, transport elements, and CE points. CE certificate and full documentation included. Requires repair: 1 piece safety mat.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K500-50739, skupna dolžina: 14.000 mm, skupna višina: 2.500 mm, skupna širina: 3.600 mm, vrsta vhodnega toka: trifazni, višina izdelka (maks.): 100 mm, višina izdelka (min.): 30 mm, dolžina izdelka (min.): 500 mm, največja dolžina izdelka: 1.800 mm, največja širina izdelka: 1.500 mm, širina izdelka (min.): 600 mm, vhodna napetost: 400 V, priključek za stisnjen zrak: 6 letvica, vhodni tok: 33 A, delovna višina: 900 mm, prehodna višina: 250 mm, širina mize: 1.700 mm, dolžina mize: 2.000 mm, leto zadnje generalne obnove: 2022, teža obdelovanca (maks.): 100 kg, Oprema: dokumentacija / priročnik, Overall machine dimensions: Ppjdovvlyijpfx Afaju Width: 3,600 mm Length: 10,600 mm (excluding loading and unloading area) Height: 2,500 mm Working height: 900 + 50 mm Feed rate: 13 – 23 m/min (frequency-controlled) PE shrink flat film properties: • Shrink film suitable for shrink sealing process (top and bottom film must be laterally sealable in the tunnel). • Biaxial shrinkage value approx. 50–60% lengthwise, approx. 40–50% crosswise • Treated with antistatic agent. • Shrink film with needle perforation improves the shrink process and allows higher gas and water vapor permeability. Shrink film to be used: • Biaxially shrinking, needle-perforated. • Wound on rolls with firm edges and straight alignment. Film thickness for application: approx. 40–60 µm. Film widths for application: 800 mm, 1100 mm, 2000 mm Maximum roll outside diameter: 350 mm Minimum core outside diameter: 90 mm Bottom film calculation: Pack width + 200–250 mm Top film calculation: Pack width + (2 x height) + 200–250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L): 1,700 x 2,000 mm / Feed speed: 13 – 23 m/min Roller conveyor after tunnel (W x L): 1,700 x 2,000 mm / Feed speed: 13 – 23 m/min KFE Standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Maximum pack height (clearance height): 250 mm / Max. film roll diameter: 350 mm Film thickness: approx. 40–60 µm PE film, good quality / Weight: approx. 3,100 kg Side sealing unit: Seal bar length: 1,850 mm / Adjustment range: 500 – 1,600 mm / Feed rate, adjustable: 13 – 23 m/min Shrink tunnel ST / II -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Conveyor length: 3,560 mm Feed rate, adjustable: 6 – 23 m/min The machine can be inspected at the production site.

Stanje: rabljeno, Leto izdelave: 2016, Rabljeni stroj Letnik izdelave: 2016 Oprema in tehnični podatki: - Talilnik za aluminijaste vreče, pakiranja 2 do 3 kg - Vrsta lepilne črpalke: zobniška črpalka - Nazivna hitrost črpalke: 93 obr/min - Velikost osnovnega rezervoarja: ca. 2 l/h - Kapaciteta taljenja: do 5 l/h - Temperaturni senzor PT-100 v napravi in zunanji grelci - Natančnost regulacije: +/- 1 °C - Grelci (naprava): 2 grelni coni; osnovni rezervoar in predtalilna plošča, ločeno nastavljiva - Priključna moč: 5 kW Mere: 1100 x 500 x 1100 mm Teža: ca. 110 kg Ppsdpjw Rhlbjfx Afaeu Dobavljivost: takoj Lokacija: 63934 Röllbach

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, COMPLET FACTORY FOR MOBILE FOR SALE 1 PCS AUTOMATIC ANGULAR SIZING SAW Producer: HOLZMA – Germany Type: HCL 11/56/22 Ser. Nr.: 0-241-17-0009 Year: 2001 1 PCS AUTOMATIC SIZING, EDGEBANDING, BORING LINE INCLUDE: - BRIDGE VACUUM LOADER - SIZING EDGEBANDING MACHINE Producer: HOMAG – Germany Type: OPTIMAT KFL 525/6/A3/15 Ser. Nr.: 0-202-10-1687 Year: 2007 - ROLLER CONVEYOR 90 DEGREES Producer: HOMAG – Germany Type: PROFI TB 10/25/12 Ser. Nr.: 0-205-10-5100 Year: 2007 - SIZING EDGEBANDING MACHINE Producer: HOMAG – Germany Type: OPTIMAT KFL 526/8/A3/15 Ser. Nr.: 0-202-10-1689 Year: 2007 - ROLLER CONVEYOR Producer: HOMAG – Germany Type: OPTIMAT TDL 310/25/12 Ser. Nr.: 0-205-10-1688 Year: 2007 - BOORING MACHINE Producer: WEEKE – Germany Type: OPTIMAT BST 500 D Ser. Nr.: 0-251-04-2754 Year: 2007 - BOORING MACHINE Producer: WEEKE – Germany Type: OPTIMAT BST 500 D Pjdpfjxwt Igsx Afaepu Ser. Nr.: 0-251-04-2755 Year: 2007 - BRIDGE VACUUM UNLOADER

Leto izdelave: 1998, stanje: dober (rabljeno), I am selling a profile edge banding machine IMA HKA. Suitable for curved elements. Ppsdpfeg Dvrisx Afaou Good condition, inspection possible!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, - Stack length: 2500 mm - Stack width: 800 mm - Max. stack height: 1650 mm (with pit) - Max. payload: 4500 kg - Motor drive, roller conveyor: 0.37 kW - Motor drive, stop ruler: 0.37 kW - Motor drive, electrohydraulics: 2.2 kW Ppjdpfx Ajw Ec Iujfasu - Dimensions: 2500 x 1900 x 2600 mm - Weight: 2600 kg