Drsna namizna žaga

Holzprofi 6-HPFX550-2AX-3,0

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 5.000 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 450 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, Oprema: dozator, motorna zavora, osvetlitev, vrtilna hitrost brezstopenjsko nastavljiva, You can obtain all popular Altendorf models from F25, F35, WA80, F45, as well as the Hand Guard machine in all variations. Standard Features - Electromotive height and tilt adjustment - 0-46° with automatic cutting height correction during tilting - Overhead control panel, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm (other widths available upon request) - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Maximum saw blade projection: 150 mm Njdpfxowf Hdgj Abksdd - Maximum saw blade diameter: 450 mm - Motor power: 4 kW (5.5 hp) at 4,000 rpm - AKE clamping system for main saw blade - Working height: 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed adjustment from 2,000 to 6,000 rpm - Accurate speed adjustment improves cutting quality and increases saw blade life Increased cutting height for single-sided tilting - This option is for single-sided tilting and is equipped with a large extraction hood for a maximum saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the maximum saw blade diameter is 500 mm and a cutting height of 179 mm. Only available in conjunction with at least 5.5 kW (7.5 hp) motor power. 2-axis scoring unit, one-side tilting - With electromechanical height and lateral adjustment, programmable scorer blade height with quick lowering and lifting. Drive motor 0.75 kW (1 hp), 8,200 rpm. Retrofitting only possible for machines prepared for scorer units. LED illumination - Highly energy-efficient LED technology makes the risk area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked in any position without steps. Large double rollers, made of precision-hardened steel, keep the upper carriage precisely aligned with the lower carriage on hardened, chrome-plated guide rails. This running quality is maintained even after decades of heavy use and contamination. The carriage design uses a multi-chamber system that is extremely torsion-resistant and dimensionally stable. The table surface is precisely planed and anodized. A hardened, chrome-plated round bar is integrated in the upper carriage as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off switch on double roller carriage - The on/off switch on the double roller carriage is always readily accessible. The four buttons control both the main saw blade and the scorer. This saves time and increases safety. Angle-mitre fence, crosscutting up to 3,500 mm - This patented ALTENDORF fence with integrated length compensation simplifies precise cutting of angles and mitres in one operation. In both positions, the swivel angle is infinitely adjustable by up to 49° and displayed via scale. Contact us for your dream machine—we look forward to advising you! We are also happy to arrange inspections directly at the machine, at the factory, or with wood dust in the air.

Stanje: novo, including, among other things, CNC-controlled rip fence mitre fence carriage length 3200 mm F 45 ProDrive: The new F 45 is a masterpiece in technology and design. The newly developed machine base exceeds all previous standards in terms of torsional rigidity and vibration damping. The control unit at eye level allows you to adjust the blade height and tilt, as well as, depending on your chosen control package, the blade speed and further functions. 3.5" colour display with separate keypad Automatic dimension correction at the rip fence and mitre fence when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last dimension input (back function) 99 storable cutting programmes Grooving: with automatic stepwise positioning of the rip fence 400V / 50Hz – Europe, scale in mm M44249 Machine height 910 mm M64099 Operation at eye level Basic configuration The control panel of the F 45 is mounted at eye level, allowing convenient access to all axes and visibility of all settings. One-hand operation of the swing-away device M64096 max. blade diameter 450 mm Basic configuration The F 45 is equipped with a parallelogram-type guard with two hoods for 90° and mitre cuts. They can be infinitely height-adjusted and self-locking. The large infeed pressure roller allows the guard to automatically adjust to the workpiece thickness. Maximum saw blade diameter is 450 mm, ensuring a max. blade projection of 154 mm. M51100 Motor 5.5 kW (7.5 HP) Single-side tilting saw unit with 5.5 kW (7.5 HP) motor, manually adjustable to 3/4/5000 rpm. Tilting range: 0 – 46°. AKE quick-change system for the main saw blade. The motors provide 20% more torque than standard electric motors with the same power consumption. M24038 Preparation for 2-axis scorer Scorer preparation for subsequent installation of a scorer unit M41010 Table extension 840 mm Basic configuration Table extension 840 mm, made of a CDF panel with double-sided HPL coating, highly resistant to scratches and impacts. M34204 Double roller carriage with carriage length 3200 mm Altendorf double roller carriage is lockable at any position. The hardened steel double rollers provide absolute accuracy between upper and lower carriage on the hard-chromed round guide bars. The carriage construction features a highly torsion-resistant multi-chamber system. The table surface is anodised. A hard-chromed round bar serves as a guide for the cross-slide and interface for various accessories. M44404 Mitre crosscut fence Nsdpfx Aevzhdzobkedd Mitre crosscut fence, crosscuts up to 3500 mm This Altendorf-patented fence with an integrated length-compensation system enables precise cutting of 90° and mitre angles in a single operation. The swivelling angle can be infinitely adjusted by 49° in both the front and rear fence positions, with readings displayed on a scale. Simply slide the fence rail to the required angle on the scale and set the desired length at the fence stop flap. For crosscut lengths from approx. 1700 mm upwards, ...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.200 mm, največja širina rezanja: 1.450 mm, širina reza pri vzporednem vodilu: 140 mm, največja višina reza: 200 mm, višina reza z zareznim rezilom (max.): 200 mm, premer žaginega lista: 550 mm, dolžina mize: 3.200 mm, skupna masa: 1.280 kg, vrtljajska hitrost (min.): 2.800 obr/min, največja hitrost vrtenja: 4.800 obr/min, moč: 7,5 kW (10,20 KM), Oprema: dozator, motorna zavora, Heavy-duty panel saw with scoring unit and Siemens three-axis control Suspended operator panel with Siemens control and 10" large touchscreen display Control of saw blade height/tilt and positioning of the rip fence via the operator panel Nedpjvmfawefx Abkodd Max. cutting height: 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High net weight ensures vibration-free operation Large outrigger table with material roller Extendable aluminium rip fence with three folding stops and digital position display Powerful 7.5 kW main motor mounted on a robust cast iron frame Quadruple-supported sliding table with double trolley made of anodised aluminium featuring high torsional rigidity Multiple locking positions on the sliding table Standard with steel sheet table extension and table widening Large swing-away overhead guard, easily adjustable via gas pressure spring Saw blade clamping via tool-free rapid system The panel saw is set up in our demonstration centre in Chemnitz. It is new and unused. We are happy to assist with transport, installation, and commissioning.