Dvigalna miza

HOLZMA LIFTOMAT HAU-A-25/8

Stanje: rabljeno, številka stroja/vozila: 007275, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height above floor: 1650 mm Codpfx Ajt H Tvvefdsrd Lifting capacity: 4500 kg

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 Cedpfx Afedt Rgvjdord VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, - Stack length: 2500 mm - Stack width: 800 mm - Max. stack height: 1650 mm (with pit) - Max. payload: 4500 kg - Motor drive, roller conveyor: 0.37 kW - Motor drive, stop ruler: 0.37 kW - Motor drive, electrohydraulics: 2.2 kW - Dimensions: 2500 x 1900 x 2600 mm Cedpfx Afsw Ec Iuedjrd - Weight: 2600 kg

Leto izdelave: 2026, stanje: novo, Fully automatic orbital stretch wrapper packaging machine SPINNER 1500s + BN Application: Packaging, grouping and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator side: - Pass-through direction right General technical data: - Main motor power: 2.2 kW - Max. ring speed: 50 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard equipment: - Powered conveyor (infeed and outfeed) for automatic product feed - Adjustable ring speed - Adjustable stretch tension with a mechanical brake device - Automatic stretch film clamping and cutting system - Automatic stretch hook system - Pneumatic front and rear presses that hold the product from above during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touchscreen for adapting machine parameters to product requirements - Operator safety systems Optional equipment: - Various types of conveyors - Infeed and outfeed rollers - Air bubble film unit (included in this offer) Technical features: Wrapping dimensions: - Max. length: unlimited - Min. size (W x H x L): 100 x 18 x 550 mm Conveyor specifications: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW Csdpfx Afsfuwrcsderd - Max. speed: 10 m/sec - Load capacity: 150 kg/m Stretch film specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 microns Air bubble film unit: - Max. film width: 1,350 mm - Max. film roll diameter: 700 mm - Core diameter: 20 ~ 76 mm - Suitable film materials: PW film, PE bubble film, PVC film - Cutting and welding system: operating temperature 50°C ~ 150°C

Stanje: novo, Working length: 2451 mm Working width: 2170 mm Working height: 800–1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800–1000 mm) - Conveyor system for timber lengths from 300 mm to 4200 mm - Conveyor system for timber widths up to 240 mm Roller Conveyor – Infeed - Continuously variable driven roller conveyor approx. 5–25 m/min - Drive via gear motor 0.37 kW, drive shaft and PU round belt - Roller diameter 50 mm, 240 mm roller length with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller cover according to HBG Cross Conveyor - Cross conveyor with 6 traverses - Conveyor belts, PVC-coated (green), 50 mm wide, guided in plastic tracks - Continuously variable driven cross conveyor approx. 5–20 m/min - Drive via gear motor 0.37 kW - Approx. 1,750 mm from stop to stop Roller Conveyor – Outfeed - Continuously variable driven roller conveyor approx. 5–25 m/min - Drive via gear motor 0.37 kW, drive shaft and PU round belt - Roller diameter 50 mm, 240 mm roller length with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller cover according to HBG ----- Belt Conveyor approx. 320 mm x 3,500 mm Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800–1000 mm) - Belt conveyor for timber lengths from 300 mm to 4200 mm - Belt conveyor for timber widths up to 240 mm - Belt conveyor on caster wheels with brake Codpfx Asi Hmpiefdord Conveyor Belt - Continuously variable drive approx. 5–25 m/min - Drive via gear motor 0.37 kW - Belt PVC-coated, 260 mm wide - Stop on both sides approx. 15 mm ----- Control System: - Ready to plug in with own control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop loop - Completely installed with 16A Euro plug - Connection: 400 V AC, 2 kW, 50 Hz ----- Pneumatics: 6–8 bar, consumption approx. 16 NL/min Color: RAL 7035 light grey Basic EU directive 2006/42/EC in accordance with 2006/95/EC Electrical Equipment (Low Voltage Directive) as well as 2004/108/EC EMC Directive ----- Price for the above-mentioned version ex-works: on request! plus packaging and shipping costs ----- (Technical specifications according to manufacturer, no guarantee!)

Stanje: zelo dobro (rabljeno), GreCon Type 2004 Optimizing Cross-Cut Saw with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec. Saw motor: 5.5 kW Saw shaft control: pneumatic Chain drive: servo motor Crjdpfsn Hwl Aex Afded Min. working width: 40 mm Min. infeed length: 500 mm Net weight: approx. 1,800 kg Was completely overhauled and then not used again Location: Austria, near Ried im Innkreis

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) Codpfx Ashvi E Isfderd LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) Cjdpfx Ajgvdkgefdjrd A) Loading station (gantry loader, double station) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electrospindles ISO 30 (each 3.7 kW) with tool magazines with 3 positions each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool holder magazines (revolver) with 56 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor, with turnover unit (180°—top side down) "RBO" Mod. Ribaltatore E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: 2 electrospindles ISO 30 (each 4.5 kW) with 3 tool magazines each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool magazines (chain type) with 60 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Unloading station (gantry double station) "RBO" Mod. Advantage SC

Stanje: rabljeno, Leto izdelave: 2018, Nosilnost 350 kg, minimalna višina mize 757 mm, maksimalna višina mize 1157 mm, dolžina mize 3000 mm, širina mize 1000 mm. Dolžina ca. 3010 mm, širina/globina ca. 1040 mm, višina ca. 1157 mm. Priporočena zmogljivost odsesavanja 2200 m³/h, število priključnih nastavkov 3 x 220 V, premer priključnih nastavkov 140 mm. Teža: 130 kg. Skladišče: Nattheim. Cjdpfexnlavsx Afdord

Stanje: zelo dobro (rabljeno), 4-sided sizing and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 SIZING UNIT: Twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: Top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), grooving unit for rabbeting and grooving UF11 (4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) KZ0400c) Rotating station (90° longitudinal-transverse) "HOMAG" model TDL 310 / 25 / 12 (for longitudinal to cross transfer) Feed speed (adjustable): 20–60 m/min KZ0400d) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 Crodpoiztxyjfx Afdsd SIZING UNIT: Pre-milling cutter (1 x 4.5 kW), twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: End trimming unit HL 84 (2 x 0.22 kW), top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile trimming/copying unit FF32 (4 x 0.4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) MINIMUM EDGE LENGTH: 70 mm (For narrow workpieces: max. thickness 25 mm, max. edge thickness 2 mm, max. cycle rate 20 pcs/min, max. feed speed 20 m/min.)