Ploščadna žaga - podajanje od spredaj

HOLZMA HPP 380/43/43

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 0-240-10-3388, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 565 h, največja širina rezanja: 4.250 mm, model krmilnika: POWER CONTROL CADmatic 4 PROFESSIONAL, dolžina odseka (maks.): 4.300 mm, delovna višina: 920 mm, Little-used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angle accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main drive motor power: 13.5 kW Scoring unit motor power: 2.2 kW Rated voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction nozzle speed: approx. 26 m/s Vacuum: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection, chip duct: 1 piece, 200 mm Nedjyla I Rspfx Ag Tjwc Extraction connection, pressure beam: 1 piece, 150 mm Operating hours: 565 h EQUIPMENT - Power Concept - Angle cutting package - Groove cutting package - Automatic ejection rule - Labelling package - Data interface for storage systems Note: Further information regarding the machine’s configuration can be found in the attached document.

Stanje: rabljeno, številka stroja/vozila: 007361, Delovno območje os X: 3050 mm Nwedpfex A Tibox Ag Tec Delovno območje os Y: 850 mm Moč glavnega vretena: 9 kW Število krmiljenih osi: 3 osi Število vrtalnih vreten: 19 Število mest za orodje: 3

Stanje: rabljeno, številka stroja/vozila: 005106, Maks. širina panela: 4300 mm Maks. dolžina panela: 4250 mm Njdpfxoyg Edms Ag Tjwc Maks. izteg glavnega žaginega lista: 95 mm

Stanje: rabljeno, številka stroja/vozila: 005108, Položaj 1: Krožna žaga za plošče – podajanje od spredaj HOLZMA-HPP 380/43/43 + TLF Položaj 2: Horizontalno skladišče HOLZMA-HPP 380/43/43 + TLF Njdpfjwuck Iex Ag Tjwc

Stanje: rabljeno, Leto izdelave: 2001, Širina reza: 3300 mm Dolžina reza: 3350 mm Teža: pribl. 4000 kg Izstop žaginega lista: 100–(115) mm Voziček žage: Hitrost podajanja: 1–100–(1–130) m/min. Hitrost povratka: 100–(130) m/min. Glavni žagin list: 400–(430) mm Motor: 7,5 - (11–13,2) kW Predrezilo: 215 mm Motor: 2,2 kW Pomikalnik: Hitri pomik: 1–60 m/min. Povratek: 60 m/min. Odsesavanje: Hitrost zraka: 30–35 m/sec. Priključek za odsesavanje: 200 mm / 115 mm Stisnjen zrak: Nwsdpfsvvkqgex Ag Tec Tlak: 5–6 bar Poraba: 20–30 l/min. Lokacija skladišča: Nattheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 4.250 mm, model krmilnika: Power Control CADmatic 4.0, dolžina rezanja (maks.): 4.300 mm, Set de machine à scier Holzma pour le découpage des panneaux et système de magasinage Bargstedt! Holzma HPP 380/43/43/R DÉTAILS TECHNIQUES Longueur de coupe : 4 300 mm Largeur de coupe : 4 250 mm Saillie de la lame de scie : 95 mm Moteur principal de scie : 18 kW Moteur de la lame inciseur : 2,2 kW Tension d'alimentation : 400 V (+10%/-5%) / 50 Hz DÉTAILS DE LA MACHINE Commande : Power Control CADmatic 4.0 avec écran plat de 17 pouces Tension d'alimentation : 400 V (+10%/-5%) / 50 Hz Puissance totale requise : 29 kW ÉQUIPEMENTS Programme de rainurage Programme de découpe/relâchement de tension Étiquetage / programme d'étiquettes / imprimante d'étiquettes PICA 108 Interface de données pour systèmes de magasinage Logiciel d’optimisation de découpe Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 Nwjdpfx Agexpu Rgo Toc DÉTAILS TECHNIQUES Longueur du chariot mobile : 13,45 m Portée : env. 12,5 m Hauteur max. du dessus de pile dans le magasin : 1 700 mm Taille max. de la pièce : 4 200 x 2 070 mm ÉQUIPEMENTS Entraînement rotatif 1 poste de chargement et 1 poste de déchargement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Panel dividing saw Manufacturer: HOLZMA Model: PROFI HPP 380/43/43 Year of manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Equipment/features: - Total connected load: 20.0 kW - Can be combined with an automatic material feed system - Max. cutting length: 4,300 mm - Max. program pusher travel: approx. 10,000 mm - Saw blade projection: 95 mm - Saw blade diameter: 380 mm - Main saw motor power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or post-forming unit - Scorer blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Infinitely variable - Program pusher feed speed: 1 – 25 m/min - Angle pressure device - Number of clamps: 7 - Clamp opening width: 95 mm - Lifting unit for raising clamps - Clamp lift height: 290 mm Nedpfx Aov N D E Rjg Tswc - Automatic labeling - Label printer - 90° rotation table for panels up to max. 4,300 x 2,200 mm - Schuler MDE software for user data acquisition and evaluation - Swiveling control panel Machine is still in operation and can be inspected. Available as of early August 2025. Location: Sauerland

Stanje: zelo dobro (rabljeno), Robni lepilni stroj Biesse Stream 5.5 A Prevoženih 246.000 m Zgornje pritisno vodilo s trakom, tekočine Nsdsxxlqvjpfx Ag Tjwc Predfrezalniki, nanašanje lepila, predgrevalnik za PUR lepilo Lepilni kotliček z izpustom lepila Pnevmatske predrezalke, pritisni valji tekočine Končne žage, Frezalni agregat zgoraj-spodaj z ravnimi rezkarji Frezalni agregat zgoraj-spodaj (več rezkarjev) Dva agregata za obdelavo vogalov tekočine Profilna ciklina (multi R1-R2), čistilne tekočine Ravna ciklina, polerka, Stroj ima NC upravljanje rezkarjev in pnevmatski paket, Največja višina elementa 60 mm, Največja debelina robnega traku v kolutu 3 mm, Podajanje 12, 18 in največ 20 m/min Stroj je v zelo dobrem stanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HOLZMA PROFILINE HPP 380 Podatki o rezu Dolžina reza: 4.300 mm Širina reza (programska pomična dolžina): 4.250 mm Višina izstopa žaginega lista: 95 mm Kombinirani in vpenjalni sistem Kombinirano profilno vodilo, 2-tirno: 9 kosov Vpenjalne čeljusti: 7 kosov Razdalje: 75/275/475/1.050/1.850/2.650/3.450 mm Ročni paralelni prisloni na vpenjalnih čeljustih: 4 kosi (položaji 75/475/1.050/2.650 mm) Zračne blazine in odsesavanje Miza z zračno blazino in kolutnim elementom 2.160 x 650 mm: 4 kosi Centralni ventilator: 1 kos Cevna napeljava za zračne blazine: 70 x 70 mm Podajalnik in programski pomik Premik žaginega vozička naprej: 1–130 m/min Premik žaginega vozička nazaj: konstantno 130 m/min Hitrost programskega pomika naprej: 80 m/min Nodpfx Agsx Nf E Rj Tewc Hitrost programskega pomika nazaj: 80 m/min

Stanje: novo, Leto izdelave: 2026, The CORMAK C2141 ATC PREMIUM (2100 x 4200 mm) is a dynamic and precise CNC router built using components from leading global manufacturers. It is suitable for the most demanding tasks and performs exceptionally well in industrial-scale production. Consistent quality control and the high-grade components used in the machine's construction ensure top-quality processing of materials such as wood, wood-based panels, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, and alucobond. Machine Description Nwjdpfovupu Usx Ag Tjc 1. Work Table - Sectional vacuum table with four independent vacuum zones, made of rigid and durable HPL panels. - Each section has ports connected to a vacuum pump via a piping system. - Main vacuum table ports are fitted with caps, enabling secure clamping of various material formats. 2. HQD Spindle - High-end brushless spindle from a renowned manufacturer, rated at 9 kW, powered through an inverter with overload protection. - The milling electrospindle is equipped with an innovative AIR cooling system. 3. Drive System - Energy-efficient, high-grade 1500W Leadshine servo drives with high holding torque (dual on Y axis) controlled by the digital NK-105 G3 controller ensure excellent machining quality while maintaining high working speeds in all axes. - Brushless servo motors driving the X and Y axes transmit power via premium planetary gearboxes. - The Z axis, where positioning precision is critical, is driven by a reinforced ball screw. - The gantry movement along X and Y axes utilizes HIWIN linear rails and helical rack and pinion gears, made from high-quality, hardened, and tempered steel, guaranteeing long-term, trouble-free operation. 4. Construction - The moving gantry is cast iron, providing exceptional rigidity and excellent vibration damping during machining operations. 5. Tool Magazine (8 tools) + Tool Measurement Sensor - The machine comes with an 8-position linear tool magazine, ISO30 cones, and ER32 collets. - Included tool holders: ISO30 and collets for tool diameters: 1/2" - 6 pcs; 1/8" - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. 6. Vacuum Pump and Suction Shoe (option) - The pneumatically actuated suction shoe, mounted at the spindle, allows connection to any chip extraction system, ensuring a clean work environment, safety, and precise operation. 7. Software and Industrial Control: - NK-105 G3 controller - The machine supports the latest version of CAD/CAM software. - OPTION: Latest UCanCAM V12 software Technical Specifications: - Working Area: 2100 x 4200 mm - Z Axis Travel: 300 mm - Construction: Gantry – cast iron; Table – welded steel - Drives: 1500W Leadshine servo drives - Work Table: T-slot / hybrid - Spindle Power: 9 kW - Spindle: HQD, air-cooled (optional mist coolant) - Spindle Speed: 6,000 to 24,000 RPM - Power Supply: 400 V, minimum 8 bar compressed air - Re-positioning Accuracy: 0.01 mm - Linear Bearings: trapezoidal guide rails, Hiwin carriages - Material Clamping: vacuum, hybrid - Vacuum Pump: 2 x 7.5 kW (option) - Software: UCanCAM V12 (option) - Machine Dimensions: 5070 x 2870 x 1900 mm - Weight: 3,350 kg