Ploščadna žaga v kotni izvedbi

HOLZMA + BARGSTEDT PROFI HKL + TSP

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm Gsdpfxet R T Hcj Agyoip - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: zelo dobro (rabljeno), TECHNICAL DATA NOT OF THIS MACHINE RETURN DEVICE for Edge Banding Machine (LEFT) Godpoff R Tqefx Agyjip In combination with a single-sided edge banding machine, this allows a single operator to consistently feed the machine. Air curtain table, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor belt (9080 x 1560 mm) Panel dimensions (MIN/MAX): Length – 240 mm / 2800 mm Width – 120 mm / 1300 mm Thickness – 8 mm / 60 mm, optional up to 100 mm

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, spindle head, and consoles - Gantry-type moving bridge - Helical rack-and-pinion drive in X and Y axes; ball screw drive in Z axis for precise positioning - Working dimensions: - Max. clamping surface on nesting table: X = 3100 mm, Y = 1560 mm - Max. travel range: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height on DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous T-slots in X and Y directions - Slot spacing 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X-direction, 4 in Y-direction - 32 mm pitch - Maximum drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Reversible rotation (CW/CCW) - n(max): 1000–4400 rpm, stepless - Mount: M10 thread, 11 mm fit - Without tools, without holder - 6 horizontal spindles: - 2 double drilling spindles in X-direction Giedpfowka Upox Agysp - 1 double drilling spindle in Y-direction - Mount: M10 thread, 11 mm fit - Max. drill length: 63 mm from mounting end - Without tools, without holder - Milling unit 7842: - Power: 12.0 kW (S6 duty cycle) - n(max) = 1000–24000 rpm, stepless - Max. output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand tools) - With collet chuck for HSK shank - Hybrid ceramic bearings - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools up to max. Ø 160 mm - Safety enclosure as per CE standards - Safety fence on sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in front machine area - Handheld remote control unit for machine operation with following functions: - Start / Stop machining program - Speed control for machining cycles - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software—1x machine license comprising: - CAMPUS NC-HOPS: - Graphical parametric system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by means of overpressure in each guide carriage

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina mize: 300 mm, višina reza z zareznim rezilom (max.): 100 mm, dolžina vretena za rezkanje: 250 mm, Equipment: Gsdpswz H Anefx Agyjip 1 GRECON feed transfer system with accumulation of 4 to 5 cleared laths of varying lengths for finger jointing 1 GRECON double-end finger jointing machine for deep notches (suitable for glued laminated timber beams) 1 180° transfer unit with two-component gluing system 1 GRECON finger jointing press 1 CNC-controlled cross-cut saw 1 outfeed table

Stanje: zelo dobro (rabljeno), Olupilnik okroglega lesa VK450 2RE. Opremljen z dvema rotorjema. Eden je rotor za frezanje štorov. Drugi je luščilni rotor. Min–maks premer lesa 8–45 cm. Minimalna dolžina lesa 3 m. V kompletu z originalnim VK centrirnim transporterjem. Bo prodan po generalnem remontu. Godpfx Agoulv Hzjyjip

Stanje: zelo dobro (rabljeno), Panel dividing saw - horizontal - with rear lifting table Control: MCS Evolution Software Powered roller conveyors (approx. mm 4500 x 2200) Lifting table (mm) 4300 x 2200 Panel rotating device (for boards) through 90° No. 2 rear pushers (1 with clamping grippers) Program-controlled pusher division No. 10 grippers Max. cutting width (mm): 4300 Useful stroke of the loader (mm): 4300 Max. saw blade projection (mm): 135 Giedpfx Ageq Rfahsyop Max. gripper opening (mm): 133 Scoring saw (max. saw diameter) mm: 20 Main saw (max. saw diameter / power) mm: 460 - 27 kW Variable saw carriage feed (m/min): 0 - 150 No. 4 front air cushion tables Total connected load (kW): 36 (approx.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 13.000 mm, dolžina pomika po osi Y: 240 mm, dolžina podajanja os Z: 100 mm, hitrost pomika os X: 25 m/min, stiskalna sila: 40 t, vhodna napetost: 400 V, skupna višina: 1.120 mm, delovna višina: 1.120 mm, dolžina vretena za rezkanje: 330 mm, krmilna napetost: 400 V, višina obdelovanca (maks.): 100 mm, premer orodja: 240 mm, največja hitrost vrtenja: 6.000 obr/min, zračni tlak: 7 letvica, skupna dolžina površin za skobljanje: 13.000 mm, Wir bieten eine vollautomatische Produktionslinie zur Herstellung von KVH-Bauholz an. Sie verfügt über eine vollständige CE-Zertifizierung sowie eine Zertifizierung des Holztechnologischen Instituts in Poznań. Entspricht den Normen ENPN 14.081 und 14.081. 1. Schräg-Abnahmeförderer 2. Aufgabetisch zur visuellen Holzklassifizierung 3. Puffer vor dem Fehlstellenauskapper 4. Automatischer Fehlstellenauskapper mit Kamera für fluoreszierende Kreide 5. Puffer vor der Keilzinkenanlage 6. Keilzinkenanlage mit Leimauftrag und Längensäge bis zu 13 m 7. Kettenmagazin-Förderer von der Leimstation zur Vierseitenhobelmaschine 8. Automatischer Einzug zur Vierseitenhobelmaschine 9. Vierseitenhobelmaschine Winter 6-33 10. Rollenabnahmetisch nach der Vierseitenhobelmaschine 11. Verpackungsautomat für gehobeltes Holz Giedpfx Aexfzyyjgyjp 12. Kettenförderer 13. Festigkeitsprüfgerät für Brettschichtholz

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Giedpfxopgkmwo Agysp Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Gisdpfxsi Hn Sro Agyjp Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: novo, Cefla sistem za lakiranje Godowhbrwopfx Agysip