PLATTEr pARTIClER ANgLE pARTIClER

HOLZMA (HOMAG GROUP) HKL 570 / 56 / 22 Profiline

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 1.600 kg, skupna masa: 2.500 kg, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.300 mm, velikost pnevmatike: 195/55r10c, Robust and high-quality sales trailer as a flatbed high-loader for snacks or merchandise. Our *SELLERH* series snack trailers feature an insulated sandwich construction. The sturdy steel frame is welded and hot-dip galvanized in a bath, ensuring high stability. The door is equipped with a lockable steel latch, *not plastic*. The *box body* consists of 25 mm polyester sandwich panels in white. The *car trailer* has four crank supports for leveling the *snack trailer*. A cost-effective *car trailer* suitable for markets, snack sales, cocktails, fast food, non-food, street food, merchandise sales, and more. Standard equipment overview: *Lockable entry door with steel latch*, *step on drawbar*, *sales hatch on the right* with interior locking gas struts, electrical distribution panel, sturdy *crank supports*, *25 mm sandwich body* in white exterior, maneuvering handles, jockey wheel with bracket, robust *welded frame*, and a highly stable V-drawbar, hot-dip galvanized. Optional accessories for our *sales trailers* include additional *hatches*, *tarpaulins*, *shelf pockets*, sales counters, cabinets, sinks, *PVC flooring*, *100 km/h shock absorbers*, and *trailer locks*. Rjdpfx Anopfb Nyopjch

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Prasa o wymiarach roboczych 4,5 m x 1,9 m Rsdpfx Anslzi S Nspsch

Leto izdelave: 2022, stanje: novo, Motor-driven Guillotine Shear MS 1303 Technical Data: Sheet width: 1350 mm Sheet thickness: 3.0 mm Stand width: - Rcsdpfx Ashk Nfuenpeh Table width: 400 mm Working height: 850 mm Control system: conventional

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER) Rcsdpfxogwbbqs Anpsh

Stanje: zelo dobro (rabljeno), ENOSTAVNA STROJ ZA OROBOVANJE ROBOV (LEVA STRAN) Debelina robov v zvitkih (min/maks) mm 0,3 / 3 Debelina robov v letvah/trakovih (min/maks) mm 0,4 / 20 Debelina plošč (min/maks) mm 8 / 60 Nadzor POWER CONTROL PC23 Powertouch / WoodCommander (pripravljen za TAPIO) Hitrost podajanja m/min 16-25 Tlak na valj, pogon s klinastim jermenom Naprava za nanašanje ločilnega sredstva, zgoraj/spodaj Nastavljivo vodilo, nadzorovano s sistemom C.N. Naprava za obdelavo robov 2 x Kw 3 Rcsdpfszku Rpox Anpeh Naprava za ogrevanje robov Naprava za nanašanje lepila (vroče taljeno lepilo + predgrevalnik) FE-MA-TECH + QA/PU + PU65 Območje pritiska na rob (nadzorovano s sistemom CN) "C 7" Magazin za robove (oddelek št. 2) s servo-sistemom za podajanje robov Odrezna naprava PK 25 (2 x Kw 0,8) maks 25 m/min Predobdelovalna naprava BF20 (2 x Kw 1,5) Večprofilna obdelovalna naprava MF21 (2 x Kw 0,55) 0°-20° Večfunkcijska naprava (obdelava zaobljene robove in oblikovalna naprava) FK 30/V20 (1 x Kw 0,7) nadzorovano s sistemom CN Univerzalna obdelovalna naprava za utore/fuge in profiliranje SF 21 (1 x Kw 5) 0°-90° Večprofilna naprava za obdelavo robov MN 21 (nadzorovano s sistemom CN) Ploski noži FA20 Naprava za poliranje FA06 (2 x kW 0,18) + prosti prostor

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Rjdpsi Hn Srofx Anpech Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), Spodnji vretenasti rezkar SCM T130E z agregatom za letev pri steklu Premer vretena: 35 mm Skupna dolžina vretena: 140 mm Hitrost vretena nastavljiva preko frekvenčnega pretvornika do 10.000 vrt/min Moč glavnega motorja: 5,5 kW Agregat za izrezovanje steklene letve Moč agregata: 2,2 kW Elektronska nastavitev višine vretena Elektronska nastavitev prislonskih elementov Štirivaljni podajalnik Masterwood Regulacija hitrosti podajanja z variatorjem CE certifikat DTR dokumentacija Leto proizvodnje: 2005 Rcsdpoxbnyrefx Anpeh

Stanje: novo, Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump displacement: 40 m³/h Redpfei Hplkox Anpoch Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOMAG WEEKE OPTIMAT ABD 150 je visokozmogljiv CNC stroj, zasnovan za natančno vrtanje, vstavljanje moznikov in montažo okovja v proizvodnji pohištva in obdelavi plošč. Stroj je idealen za mizarje, proizvajalce pohištva in industrijske lesnopredelovalne obrate, ki potrebujejo natančno in učinkovito avtomatizirano obdelavo. Lastnosti stroja: CNC-krmiljena enota za vrtanje in vstavljanje Integriran sistem za lepljenje in vstavljanje moznikov Robustna industrijska konstrukcija Kompaktne dimenzije Uporabniku prijazen upravljalni panel CE certifikat Stroj je redno vzdrževan in pripravljen za uporabo. Rcedjym Nvtspfx Anpsh

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, CLT BSP production line with CNC machining center Rcedsxzy N Sopfx Anpjh Capacity: approx. 25,000 m³/year in 2-shift operation Functional Description / Scope of Supply: - Infeed for longitudinal lamellae: loading – singulation - Infeed for cross lamellae: loading – vacuum destacking – feeding to planing machine - Formation and buffering of longitudinal layers: preparation of longitudinal layers and removal station - Formation and buffering of cross layers: 2-level cross layer buffer – cross layer removal station - Lay-up and glue area: vacuum lay-up gantry – adhesive application gantry – lay-up table - BSP press: TimberPress X331 - Outfeed section after BSP press: cross transfer carriage to buffer stations, Reichenbacher system and removal station with turner - Reichenbacher CNC machining center BSP blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available upon request.