Stroj za robne trakove

HOLZ-HER Streamer 1057 Edition 100 Plus

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, SCHEER FM 16 Panel Dividing System – DNC 3100 x 3100 As-new condition – Machine No. 33542 Cpsdpfjunwk Tox Afnsw The SCHEER FM 16 is a powerful, electronically controlled panel dividing saw featuring state-of-the-art drive technology and intuitive controls. It has been completely overhauled and newly painted – its condition is almost as new. Ideally suited for precise, automated cutting of wood-based materials in continuous industrial operation. Main Technical Data: Cutting length: 3100 mm Saw depth / Blade projection: 80 mm Saw motor: 7.0 kW Scoring unit motor: 1.1 kW (can be switched off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering User interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & Special Equipment: Longitudinal cutting saw FM 16-3100 with hardened guides and automatic forward/reverse feed Material feed table HP 5021 with 6 clamp carriages, servo drive & measurement resolution of 0.05 mm Angle pressure device WP, adjustment range 2400 mm, fully automatic Trim cutting device SP 5000 for remainder cuts down to min. 5 mm Angle stop table HP 5024 (1800 x 800 mm), steel angle with phenolic overlay Workpiece support table HP 5025 (1800 x 800 mm), also with phenolic overlay Air cushion tables at the front incl. radial fan Saw blades included: KSB 4005 for main saw (ø 305 mm, Z = 60) KSB 4006 for scorer (ø 200 mm) Condition & Service: Condition: Overhauled & as new Functionality: Fully operational Warranty: 12 months Dependable for Continuous Operation: This machine is in use worldwide—even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g. Thailand): the SCHEER FM 16 reliably runs in 3-shift operations – 365 days a year – and excels with maximum precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier parts and wear parts.) Flexibility & Individualization: We offer various models and equipment options—for every budget. In addition, we implement tailor-made special solutions according to your individual requirements. 📞 Contact us for a customized offer or to arrange a viewing appointment. The machine is available from stock. Delivery, commissioning, and training available on request.

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Leto izdelave: 2011 Stanje: stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Brezstopenjska hitrost podajanja 10–18 m/min Krmiljenje Edge Control 19 z 18,5" barvnim zaslonom na dotik Agregat za dodajoče rezkanje Podajanje robnih trakov Postaja za nanašanje lepila, kartuša, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Agregat za krajšanje Večnamenski rezkalni agregat Kopirni rezkalni agregat Cjdswka N Tepfx Afnopw Agregat za obla robove Ravna rezkalna rezila Polirna enota Debelina obdelovanca 6 - 60 mm Debelina robnega traku 0,4 - 8 mm Minimalna širina obdelovanca 60 mm Najkrajša dolžina obdelovanca 180 mm Dimenzije: 5300x1500x1600 mm Teža: 2200 kg Lokacija: 65439 Flörsheim Razpoložljivost: na kratki rok

Stanje: rabljeno, Leto izdelave: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Cjdpfx Afowwiybonspw Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails No. 3 suction cups per work rail for securing the workpiece No. 1 electro-spindle, 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - No. 12 vertical spindles, Y-axis - No. 6 vertical spindles, X-axis - No. 4 horizontal spindles, Y-axis - No. 2 horizontal spindles, X-axis Automatic tool change system with 18 positions - located at the rear of the machine Front guard and safety system with mats and safety nets Automatic lubrication system Air conditioning for control cabinet No. 1 vacuum pump

Stanje: rabljeno, Edge thickness: from 0.4 to 5.0 mm Workpiece thickness: from 10 to 50 mm Total length: 4000 mm Cpodswgwl Djpfx Afnow Feed speed: 11 m/min Bimatic Edge Bander Model: Prima 7.5 Two ----- Manufacturer's Description: Technical Data: Edge thickness: 0.4 – 5 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction spigots: 3 x 150 mm Connection: 9 kW – 400 V / Compressed air: 6 bar Units: Jointing milling unit incl. AIGNER diamond jointing cutter heads, with Konstantin DIA quick-change knife system and controlled edge air blast nozzle after the 2nd jointing cutter head. Cut-off saw unit with extraction device incl. 2 pneumatically swivelling saw blades, adjustable and programmable from the control panel. MULTI-radius milling unit with 4 position motors, adjustable and programmable from the control panel. Includes DIAMOND cutters with 1 mm and 2 mm radii. Corner rounding unit (copy milling unit) with nesting function and pneumatic 2-position revolver, adjustable and programmable from the control panel. The complete unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1 mm and 2 mm, with pneumatic 4-position revolver. The unit can also be pneumatically engaged/disengaged. Incl. extraction device with chip collection box for scraper shavings. Flat scraper unit with four-sided scraper blades, reusable on 4 edges. The complete unit is pneumatically engageable/disengageable. Removed glue residues are extracted. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth/sisal/lambswool wheels for cleaning and polishing. General Features: - 90° infeed guide - Telescopic outfeed with double support - Motorised infeed fence (jointing thickness setting), adjustable and programmable from the control panel - Motorised upper pressure beam, adjustable and programmable from the control panel - Motorised pressure zone, adjustable and programmable from the control panel - 5 mm version: quick-change motors with reversible flush cutters, interchangeable for milling motors with radius cutters - High-gloss package: roller sensing for radius milling unit, radius scraper unit, and flat scraper unit - Large visual, noise and safety enclosure for all units and the glue pot - Interior lighting - Control panel with 15” touchscreen and intuitive operator guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece gap monitoring - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with feed auger for long and high workpieces (specially for PUR adhesive) - Additional quick-change glue pot - Pressure zone with 3 pressure rollers, with the first roller driven by a motor - Heavy-duty roller shear for edging 54 x 3 mm - Original RIEPE spraying system - In front of the jointing milling unit: LPZ II separator - In front of the saw unit: cooling and anti-static LP 289/99 - Mo...

Leto izdelave: 1997, stanje: potreben popravila (rabljeno), Mazitno rezkalni stroj Maka DB-6 V, rabljeno, letnik 1977 Proizvajalec: Maka Model: DB-6 V Opis: Cjdpfx Aefd Rxqjfnjpw VERTIKALNI MAZITNI REZKALNI STROJ MAKA DB-6 V, leto izdelave: 1977. Stanje stroja: zelo dobro po generalni obnovi. Vrsta ponudbe: rabljeni stroj. Lokacija: Poljska. Tehnični podatki: ZELO POMEMBNO – STROJ JE VERTIKALNI IN PO OBNOVI. Letnik: 1977

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, Cpsdpov Sv Enefx Afnsw End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 7 kW (9,52 KM), premer žaginega lista: 305 mm, skupna dolžina: 3.100 mm, skupna širina: 3.100 mm, skupna masa: 3.000 kg, dolžina rezanja (maks.): 3.100 mm, višina reza z zareznim rezilom (max.): 70 mm, hitrost pomika os X: 40 m/min, hitrost podajanja os Z: 50 m/min, zahteva za prostor dolžina: 3.100 mm, potrebna širina: 3.100 mm, Oprema: dozator, vrtilna hitrost brezstopenjsko nastavljiva, Panel Dividing Saw SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a powerful, electronically controlled panel dividing saw designed for precise, efficient, and automated cutting of wood-based panels. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Main Technical Data & Equipment: - Longitudinal cutting saw FM 20-3100 with hardened guides - Automatic forward and return movement of the saw unit (automatic lowering on return) - Feed drive via three-phase gear motor with frequency inverter control - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Scoring saw adjustable from the outside (without opening the hood) - Safety hood locking with louver curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 recesses in the pressure beam for residual cuts down to 5 mm - Main saw motor: 7.0 kW | Scoring saw motor: 1.1 kW (can be switched off) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angular pressure device WP 5003 with pressure claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack and pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - 6 clamp fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed phenolic (Pertinax) surface in the angular fence area Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard drive, parallel & serial ports - Network capable (LAN/WLAN), remote servicing via Internet (TeamViewer, Remote Desktop) - USB print function Cpedowrn Efepfx Afnow - Multilingual dialog programming - 15" flat screen, multifunction keyboard at swiveling control panel - Graphical display of cutting plans and workflows Software / Programs: - OPTIMAX: Office optimization, offcut calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette, or online (optional) - Manual, automatic & special operating modes (e.g., grooving, veneered parts) Additional Equipment: - Angular fence table HP 5085: 1,720 x 800 mm | Phenolic top - Workpiece support table HP 5025: 1,720 x 800 mm | Phenolic top - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is in use worldwide — even under extreme conditions. Whether in Africa’s dry climate or the high humidity of Southeast Asia (e.g., Thailand), the PA 4136 delivers reliable operation in 3-shift systems — 365 days a year — and impresses with exceptional stability and durability. Guarantee: We are so convinced of the quality and durability of our machines that we offer a 7-year warranty on the machine structure and guideways. (Excludes electrical supplier parts and wear parts.) 📞 Contact us for an individual quotation or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Cpjdpfxoh Talze Afnew Approximate weight: 6,250 kg Dimensions (LxWxH): 4,180 x 2,150 x 2,000 mm Technical Data: Sheet thickness: 6 mm Cut length: 3,200 mm Cutting angle: 1.30° Backgauge: motorised, 1,000 mm Motor power: 7.5 kW Length: 4,000 mm Width: 1,700 mm Height: 1,800 mm Weight: 6,250 kg Equipment: Swing beam design NC preselection control ELGO P 40 T with backgauge and cutting gap adjustment from the front via the control panel motorised backgauge up to 1,000 mm clear control panel mounted on a swing arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball inserts foldable finger guard 1,000 mm 1 T-slot side stop 2 sheet support arms with T-slot simple blade change and resharpening adjustable cutting length for economic processing lower blade with four cutting edges, reversible upper blade with two cutting edges, reversible qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), 21 drilling spindles 32 mm spindle pitch Cpodpfx Afjh Txmtjnow Pneumatic clamps Capable of vertical, horizontal, and 45° angle drilling Adjustable drilling depth from 0 to 80 mm

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Panel dividing system PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1-year limited warranty Technical specification: Left-angle stop according to AGA 4383 Longitudinal cutting saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (continuously variable via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable externally (without opening the safety guard) - Saw unit with regulated DC drive: - Precise positioning (e.g. for cut-outs) - Slowed withdrawal from the cut - Includes safety guard interlock, lamella curtain SZ 5008 - Offcut cutting device SP 5004 – offcuts down to min. 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (separable) Cpedpfx Asxhg Ibjfnow - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: threshold value of 2 mg/m³ significantly undercut - CE-compliant Angle pressure device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material feed table HP 5021 (rear-mounted to FM 16): - Parallel stop with 6 spring-mounted clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety-limited) - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard disk - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connection (including wireless LAN) - Optimize cutting plans in office and send directly to the machine - Multitasking capable - Printing function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling operator console - Graphical display of cutting plans and workflows Additional equipment: Angle stop table HP 5043 (front side): - Machined steel angle, Pertinax table surface - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front side): - Pertinax surface - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 tapered (for scoring saw)