Enostranski stroj za robove

HOLZ-HER ACCURA 1554

Stanje: rabljeno, Leto izdelave: 2019, Edge control: numerical control Panel height min - max: 6 - 60 mm PVC/ABS up to 3 mm Minimum panel length / width: 140 / 60 mm Feed speed: up to 10 / 25 m/min, continuously variable Working height: electronically adjustable via NC Side roller track with return rollers for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA / PUR glue with cartridge or granulate system Edge pressure unit for straight profiles with electronically adjustable pressure rollers (NC) End trimming unit with 2 motors Buffing unit with 2 tilting motors, electronically adjustable via NC Corner rounding unit with 4 multifunction motors (chamfering + rounding), regulated via numerical control in automatic mode Scraper with electronic regulation via NC Glue scraper unit Buffing unit Machine length: approx. 6500 mm Dedpfowwhn Djx Abgjkp Weight: approx. 2750 kg

Stanje: rabljeno, številka stroja/vozila: 008394, Najv. širina plošče: 3800 mm Najv. dolžina plošče: 3800 mm Najv. izstop glavnega žaginega lista: 55 mm Dsdpfx Aboygtbtjgokp Število vpenjal: 4

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Djdelht Hzspfx Abgokp Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Leto izdelave: 2024,

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Djdpfsug Ty Hex Abgekp Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: zelo dobro (rabljeno), 3-osni (X-Y-Z) CNC OBDELOVALNI CENTER Premična plošča (obdelovanec), premični delovni glavi Vertikalna plošča (obdelovanec) Dodsyywcvspfx Abgjkp Krmiljenje POWERCONTROL + POWERTOUCH Programska oprema woodWOP Varnostna kabina delovne glave Št. 1 blokada za vpenjalne čeljusti obdelovanca na delovnem področju Pogon obdelovanca s transportno verigo Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 70 x 12 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 850 x 60 Skupna priključna moč (kW) 11,5 (pribl.) DELOVNE SKUPINE: Št. 1 vrtalnih agregatov (moč (kW) 2,3) z vertikalnimi vreteni: - Št. 13 neodvisnih vertikalnih vrtalnih vreten (V13 High Speed) - Št. 6 neodvisnih horizontalnih vrtalnih vreten (4 v osi X + 2 v osi Y) Št. 1 rezkalna žaga za utore (za obdelave v X-osi); premer (mm) 100 Št. 1 vertikalno glavno vreteno (rezkalni agregat) HKS63 (moč kW 5) Avtomatski sistem menjave orodij – število mest v magazinu (št. 4 mest za orodja)

Stanje: rabljeno, številka stroja/vozila: 008438, Maksimalna širina panela: 4500 mm Djdpfoyngy Ssx Abgekp Maksimalna dolžina panela: 4500 mm Maksimalni iztek glavnega žaginega lista: 50 mm Število vpenjalnih klešč: 8

Stanje: rabljeno, številka stroja/vozila: 008125, Tip nalepljenega roba: tanek rob, debel rob Leplilni sistem: EVA, vroči zrak Priprava za lepljenje spojev: da Večnamenski agregat: da Maks. hitrost pomika: 18 m/min Dodpfx Abew Tivmegokp Delovni agregati: 7 kosov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding. Dkjdpox D H Hcsfx Abgjp

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Dkjdpfxjvwbp As Abgep