Odsesovalni sistemi Holtrop & Jansma ODFS-690 2008

Holtrop & Jansma ODFS-690

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. The prices are listed for each item. Consisting of the following individual components (see attached document): Pictures will follow and are already included in the attached document. Table 1 (Insertion and clamping of the frame work) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Table 2 (Laying and securing the first sheathing) €25,300 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying and securing the second sheathing, turning of the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical and insulation) €34,500 - Cross transport with rollers and paneling - Cross travel of the table - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first sheathing and securing the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying and securing the second sheathing) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic transverse clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swinging unit - Table cross-travel unit - Upper guide for holding the walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 (Laying the first sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 (Laying the second sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 5 €13,800 (Laying the first sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 (Laying the second sheathing on the second side) Gtedpfx Afsu D Amgoqot - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 bays €11,500 Wall rack 2: 12 m long x 20 bays Vacuum lifter with column slewing crane €9,200 1 Spreader beam 2 t Abus €20,125 1 Spreader beam 2 t

Stanje: zelo dobro (rabljeno), Olupilnik okroglega lesa VK450 2RE. Opremljen z dvema rotorjema. Eden je rotor za frezanje štorov. Drugi je luščilni rotor. Min–maks premer lesa 8–45 cm. Minimalna dolžina lesa 3 m. V kompletu z originalnim VK centrirnim transporterjem. Bo prodan po generalnem remontu. Gsdpfx Afjulv Hzsqott

Leto izdelave: 2000, Stanje: dober (rabljeno), Ravnalna linija EWD Combimes. Leto izdelave 2000, tip DK90-TL. Dovod lesa z leve strani. Maksimalna širina obrezovanja 500 mm, maksimalna debelina 120 mm. Pogonski motor 90 kW. Cikel pri dolžini lesa 4,0 m je približno 18 kosov/min. Popolna z originalnim EWD krmiljenjem. Dobava vključuje zalogovni transporter pred razdeljevanjem do ločevalnika odrezkov. Linija je popolna in v dobrem stanju. Gtedpfjxcwvxsx Afqet

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Gsdsw Sy T Hepfx Afqstt Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 13.000 mm, dolžina pomika po osi Y: 240 mm, dolžina podajanja os Z: 100 mm, hitrost pomika os X: 25 m/min, stiskalna sila: 40 t, vhodna napetost: 400 V, skupna višina: 1.120 mm, delovna višina: 1.120 mm, dolžina vretena za rezkanje: 330 mm, krmilna napetost: 400 V, višina obdelovanca (maks.): 100 mm, premer orodja: 240 mm, največja hitrost vrtenja: 6.000 obr/min, zračni tlak: 7 letvica, skupna dolžina površin za skobljanje: 13.000 mm, Wir bieten eine vollautomatische Produktionslinie zur Herstellung von KVH-Bauholz an. Sie verfügt über eine vollständige CE-Zertifizierung sowie eine Zertifizierung des Holztechnologischen Instituts in Poznań. Entspricht den Normen ENPN 14.081 und 14.081. 1. Schräg-Abnahmeförderer 2. Aufgabetisch zur visuellen Holzklassifizierung 3. Puffer vor dem Fehlstellenauskapper 4. Automatischer Fehlstellenauskapper mit Kamera für fluoreszierende Kreide 5. Puffer vor der Keilzinkenanlage Godpfx Ajxfzyyefqott 6. Keilzinkenanlage mit Leimauftrag und Längensäge bis zu 13 m 7. Kettenmagazin-Förderer von der Leimstation zur Vierseitenhobelmaschine 8. Automatischer Einzug zur Vierseitenhobelmaschine 9. Vierseitenhobelmaschine Winter 6-33 10. Rollenabnahmetisch nach der Vierseitenhobelmaschine 11. Verpackungsautomat für gehobeltes Holz 12. Kettenförderer 13. Festigkeitsprüfgerät für Brettschichtholz

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina mize: 300 mm, višina reza z zareznim rezilom (max.): 100 mm, dolžina vretena za rezkanje: 250 mm, Equipment: 1 GRECON feed transfer system with accumulation of 4 to 5 cleared laths of varying lengths for finger jointing 1 GRECON double-end finger jointing machine for deep notches (suitable for glued laminated timber beams) 1 180° transfer unit with two-component gluing system 1 GRECON finger jointing press 1 CNC-controlled cross-cut saw 1 outfeed table Gtedpfxewz H Anj Afqjt

Stanje: zelo dobro (rabljeno), obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, Automatic Finger Jointing Line Grecon Dimter Ultra The machine has undergone a complete overhaul. Specification: Tenoner: Saw spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling spindle: - Spindle diameter: Ø50 mm - Usable spindle length: 210 mm - Max. tool diameter: Ø250 mm – Ø150 mm - Spindle speed: 6,000 rpm - Milling motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feeding table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Feed speed: Steplessly adjustable Dust extraction: Chipper extraction nozzle diameter: Ø100 mm Moulder extraction nozzle diameter: Ø150 mm Extraction capacity (airflow): ~2,400 m³/h Pneumatic system: Operating pressure: 6 bar Air demand: ~2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Joint Press CONTI M 6/6000: Press: - Strip width: 25 – 160 mm - Finished strip length: approx. 6,000+15-50 mm - Pressing force: 3 – 7.5 T (3,000 – 7,500 daN) Circular saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Dust extraction: - Saw extraction nozzle diameter: Ø100 mm - Extraction capacity (airflow): ~400 m³/h Pneumatic system: - Operating pressure: 6 bar - Air demand: ~2.5 m³/h at 6 bar (15 Nm³/h) Scope of refurbishment: 1. Cleaning of machine bodies and application of new paint 2. Replacement of bearings with new ones: on the main spindle of the tenoner; on the saw spindle of the press; linear bearings on the carriage guide of the tenoner table; bearings on the working belts. 3. Installation of a new glue nozzle with 3.8 mm pitch on the tenoner body, installation of a glue supply tank with safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic lines for cylinders, solenoid valves and other pneumatic components in the machines; 7. Replacement of gears and double-row chain in the conveyor/chain feed of the press. 8. Refurbishment of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic cylinders. Replacement of worn solenoid valves with new ones. 10. Replacement of operator panels with new graphic panels on the tenoner cabinet, press cabinet, and small press panel. 11. Replacement of buttons, indicator lights, and switches on control panels and control boxes. Replacement of terminal boxes with new ones. 12. Replacement of control units for the tenoner and press, customization of the machine's control software to customer requirements. 13. Installation of a new inverter on the press rollers and on the ejector pusher of the outfeed table; 14. Maintenance of electrical installation in control cabinets, modernization and creation of an electrical schematic diagram. Gtedpfx Aeuddvajfqst 15. Installation of guards, meshes, and necessary descriptions, labels, safety signs, manufacturer’s logo, and nameplates. 16. Replacement of V-belts with new ones, inspection of pulleys; gear motors and motors. 17. Replacement of limit switches, inductive and optical sensors (photoelectric cells) with new ones. We specialize in wood jointing machines. Installation, commissioning, and operator training within Poland are included in the price; in other countries, these services are available at an additional charge. We provide service and spare parts availability.

Stanje: rabljeno, prevoženi kilometri: 371.140 km, moč: 309 kW (420,12 KM), prva registracija: 12/2012, vrsta goriva: dizel, lastna masa: 10.170 kg, največja dovoljena obremenitev: 15.830 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80 R22,5, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: noben, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.600 mm, Leto izdelave: 2012, gradbena višina: 4.000 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, Cylinder head gasket defective Gtjdpfx Afowzzkyeqot The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a high-performance truck equipped with a 10,308 cc diesel engine delivering 309 kW (420 hp). The vehicle, first registered on 03/12/2012, has a mileage of 371,140 km. It complies with the Euro 5 emissions standard and features an automatic transmission. With dimensions of 9,600 mm in length, 2,550 mm in width, and 4,000 mm in height, this truck offers a permissible gross weight of 26,000 kg. The yellow (metallic) vehicle is fitted with a green environmental sticker (Class 4) and includes practical features such as a steering axle, a reversing camera, and an integrated air conditioning system. The cab accommodates two persons and has two doors. The truck has had one previous owner and is in used condition. In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility for inspection and delivery within Germany. Sale exclusively to business customers (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Stanje: zelo dobro (rabljeno), Schnelleinförderung für Vierseitenhobelmaschine bestehend aus einem freistehenden Flachmagazin vor der Hochgeschwindigkeitshobelmaschine. Das Zuführmagazin wird von Hydraulikmotoren angetrieben, die von einer 5,5-kW-Hydraulikeinheit gespeist werden (max. 140 m/min). Ein Vorschubpuffer aus Rohlingen wird flach nebeneinander auf dem Kettenquerförderer ausgerichtet. Der Kettenförderer transportiert die Werkstücke zum Anschlag. Das Werkstück neben dem Anschlag wird mittels Lichtschranke erkannt, woraufhin die erste Andruckrolle angehoben wird, um den Eintritt zu ermöglichen, und die Transportrolle schiebt das Werkstück unter die Einzugswalzen der Hobelmaschine. Die erste Vorschubwalze der Hobelmaschine muss eine freilaufende Rolle sein, um den Betrieb der EM814 zu ermöglichen. Gtedpfx Afjwgbxzjqjt