Hladilnik, hladilnik

Hitema ENR 075 Prozess Kaltwassersatz

Stanje: zelo dobro (rabljeno), Standardni kotel 30 t/h. Letnik 2012. Z dvema oljnima gorilnikoma. Nlodpjxgn Itjfx Aanof

Stanje: novo, Dimensions (L x W x H): 960 x 460 x 860 mm Weight: 75 kg Nlodpfx Aajzdk E Nenef Number of drawers: 8 pcs. Tool trolley equipped For contents and configuration, see images

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1. Plinski gorilnik WEISHAUPT WM-G30/2-A --- 4100kW, s plinsko progo DUNGS DN65 Moč: 450-4100kW Izvedba: ZM Leto izdelave: 2010 2. Plinski gorilnik WEISHAUPT G50/1-B - 4000kW, s plinsko progo DUNGS DN65 Moč: 550-4000kW Izvedba: ZM-NR Nedpfx Aaowg Hkcenelf Leto izdelave: 2004

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Portalski dvigalnik CORMAK 2T je robusten in zanesljiv industrijski stroj, zasnovan za intenzivno uporabo v proizvodnih halah, delavnicah, skladiščih in drugih industrijskih objektih. Zaradi nosilnosti do 2000 kg, trpežne konstrukcije in mobilnega okvirja z vrtljivimi kolesi omogoča varno in natančno dvigovanje ter transport težkih konstrukcijskih elementov, strojev ali materialov. Najpomembnejše značilnosti in prednosti: Nosilnost 2 tone – idealna za dvigovanje težkih tovorov v industrijskih aplikacijah. Nastavljiva delovna višina v območju 2400–3600 mm – prilagajanje različnim vrstam objektov in projektov. Dvojna nosilna palica tipa T (100 x 180 mm) – povečana stabilnost, možnost namestitve vrvnega ali verižnega dvigala. Mobilnost – štiri vrtljiva kolesa z zavorami zagotavljajo enostavno premikanje in varno namestitev na delovnem mestu. Odpornost proti torziji – ojačana jeklena konstrukcija z dodatnimi oporniki zagotavlja togost pod obremenitvijo. Varna nastavitev višine – izvedena z uporabo ročice in dveh varnostnih vijakov na vsakem nosilcu. Profesionalna zasnova za industrijo Model CORMAK 2T je bil ustvarjen z mislijo na učinkovitost, vzdržljivost in varnost. Konstrukcija, ki temelji na dvojni nosilni palici tipa T, omogoča namestitev različnih vrst dodatne opreme – od verižnih dvigal do električnih dvigal. Trpežna kolesa zagotavljajo tiho in gladko delovanje tudi pri polni obremenitvi, parkirne zavore pa zagotavljajo stabilnost med operacijami nakladanja ali montaže. Dvigalnik se lahko hitro premika po določeni delovni poti ali pa se prenese na drug del hale. Zaradi velike mobilnosti in togosti se uporablja v številnih panogah: od težke industrije, gradbeništva, do servisnih obratov ali logističnih centrov. Vsestranskost in možnost nadgradnje Dvigalnik lahko dopolnite z dvižnimi napravami, verižnimi ali vrvnimi dvigali, kar omogoča natančnejše in bolj nadzorovano upravljanje s tovorom. Zato je idealen za opravila, kot so: Nakladanje in razkladanje strojev in industrijskih komponent Montaža jeklenih in konstrukcijskih elementov Premeščanje težkih delov v popravljalnih delavnicah Servisna, popravljalna in montažna dela v gradbeništvu Standardna oprema: Jekleni okvir z nastavljivo višino Dvojna nosilna palica tipa T: 100 x 180 mm 4 vrtljiva kolesa z zavorami Trdni nosilci z varnostjo Ojačana konstrukcija, odporna na torzijo Profesionalna rešitev za vaše podjetje Portalski dvigalnik CORMAK 2T je garancija zanesljivosti in varnosti pri delu z velikimi tovori. Je naložba, ki bo zagotovila učinkovitost in natančnost tam, kjer druge rešitve ne zadostujejo. Zaradi možnosti dodatne opreme lahko napravo enostavno prilagodite specifičnim proizvodnim ali montažnim potrebam. Opozorilo: dvigalnik se prodaja brez dvižne naprave – slike so ponazoritvene. Nlederidh Nepfx Aansf Tehnični parametri: Nosilnost: 2000 kg Dvojna nosilna palica T: 100 x 180 mm Višina: 2400 mm – 3600 mm Celotna širina: 2360 mm Teža: 168 kg

Stanje: novo, Leto izdelave: 2025, Protec welding turntable, 5000 kg load capacity Continuously variable speed control: 0.05 - 0.5 rpm Hand-held remote control Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at extra cost Nsdpfxsid Szco Aanjlf

Stanje: dober (rabljeno), Leto izdelave: 2004, Universal milling machine with HEIDENHAIN TNC 124 path control mechanical handwheels swivelling tilting table ±45° hydraulic tool clamping Nedjigm Tcepfx Aanolf half-enclosure coolant tank manual Technical specifications: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 - 3,150 rpm Infinitely variable feed rate: 12-3000 / 6-1500 (Z) mm/min Quill stroke: 100 mm Head swivels: ±90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total connected load: 8 kW Machine weight: approx. 2.2 t Space required: approx. 2 x 1.9 x 1.95 m

Stanje: novo, Leto izdelave: 2025, skupna dolžina: 1.600 mm, skupna širina: 2.200 mm, skupna višina: 2.350 mm, skupna masa: 250 kg, vrsta vhodnega toka: trifazni, delovna širina: 1.400 mm, Paint booth, paint wall, extraction unit TQN1414 Nodpfxsd S N I Ne Aanslf With right- or left-handed exhaust outlet. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan power: 1.5 kW • Airflow capacity: 6,500 m³/h • 2 x 100% polyester filters • Filtration efficiency: 99.9% • IP66 control panel • Automatic filter cleaning • Hermetically sealed lighting, IP65 • Paint tank Cabin available immediately (in stock) WHY CHOOSE BUMEX SP. Z O.O.? High-quality machines among the best on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. are EC certified. We offer our own transport – prices are determined individually for each offer. We provide VAT invoices. Short delivery times! Possibility to order machines in various custom configurations and dimensions! Please contact us.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available Nsdpfxeyidvde Aanjlf - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request.

Stanje: rabljeno, Vertical multistage high-pressure centrifugal pump GRUNDFOS Like-new pump, but a part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - Pump design in 9 stages - Made from stainless steel 1.4401 - The nearly new pump has been used as a parts donor, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and dewatering Packed in the original wooden crate Nledpsfupadjfx Aansf Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Total weight with shipping crate: 85 kg Condition: As new Not a submersible or immersion pump

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Nedpod H Hhzjfx Aanjlf Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1