Hidravlični stroj Vise

HILMA PWO-001896

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Ffsdow Ucyuepfx Afljt Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Demag Ergotech-System 250/280-80 Ffodshrw Amspfx Aflot Schließkraft 25 t Schnecke 25 mm Baujahr 2003 Angussentnahmeroboter 2 Stück

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system: OSP-U100L Fedjrfw Nhepfx Afloft Travels: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping area: 1200 x 510 mm Tool changer: 20 magazine positions Chip conveyor

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1977, Strojniška stružnica Znamka: WEILER Model: MDU 260 Leto izdelave: 1977 – delavniško testirana Št. stroja: 14942 Višina konic: 125 mm Premer vretena: 28 mm Oprema: - Električni pokrov vpenjala - 3-čeljustno vpenjalo Ø 140 mm vključno s kompletom stružnih čeljusti vključno s kompletom svedrskih čeljusti - 4-čeljustno vpenjalo Ø 140 mm vključno s kompletom stružnih čeljusti Fodpfsxv A I Tox Afleft vključno s kompletom svedrskih čeljusti - Varnostni ključ za vpenjalo - Ročni vpenjalni sistem - Set vpenjalnih tulec W28 (366E) - Set (=25 kosov) napenjalnih tulec W28 (366E), od 1,0 do 25,0 mm v korakih po 1,0 mm - Trdna konica za glavni vretenik W28 (366E) - Hitromenjalni nosilec orodja osnovno telo velika A - Navodila za uporabo Rabljeno kot je vidno, prodano brez garancije Stroj tehnično ustreza standardu iz leta izdelave.

Stanje: pripravljen za uporabo (rabljen), Number of tool stations: 25, max. spindle speed: 6300 rpm, taper: SK40 with DIN 7388 pull stud, connected load: 35 kVA, control: Deckel Maho MillPlus, operating/spindle hours: 56,344 / 14,965 h, equipped with chip conveyor and 600 l coolant tank, supplied without tools and clamping devices. Ffsdpfx Ajlbmtnjflot

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Ffjdpfx Afjvbifgelot Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Indexing Head Walter Fodpfx Astrnndjfleft Type UPA 125 N (28487) Direct and indirect dividing Centre height 125 mm Usable in both horizontal and vertical position Spindle taper MK 4 KKG 3 Travel spindle SPH 125 mm Mounting MK 2 Total transport weight 62 kg Indexing head 48 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, nazivna (navidezna) moč: 10 kVA, skupna masa: 6.500 kg, največja hitrost vretena: 20.000 obr/min, Heidenhain TNC530, delilnik – 4. os vreteno 20.000 vrt./min, HSK 63 miza 850 x 530 mm Ffodpjw Dc Irjfx Aflot hodi 600 x 450 x 450 mm menjalec 30 orodij teža 6500 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 750 mm, pomik po osi Z: 750 mm, CNC control: Heidenhain TNC426 30-slot tool changer Electronic handwheel Chip conveyor Coolant system Technical data: Travel X / X-axis travel: 1000 mm Ffsdpfoua S Hrox Aflet Travel Y / Y-axis travel: 750 mm Travel Z / Z-axis travel: 750 mm Table size: 1150 x 700 mm Spindle taper: SK40 Spindle speed range: 12000 rpm Number of tool stations in ATC: 30 Machine weight approx.: 10,500 kg Technical data, accessories, and machine description are non-binding.

Stanje: rabljeno, Details on request. Ffjdpfx Afodbmyzjlot