Tisk delavnice

HIDROLIKSAN HD150

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction Bsdpom Rlb Nsfx Abhscu • Safety relay • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: novo, Capacity: 300 kg Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg per piece Rotational speed: 22 rpm Filling level: 40–50% Color: Blue RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Dimensions (L x W x H): 1 x 1.7 x 1.29 m New deburring or scouring drum (deburring machine) designed for safe and efficient deburring of workpieces. 6-sided drum lined with 36 mm wear-resistant, vulcanized rubber. Roll-up cover for protection against the rotating drum, robust construction, easy operation. Control panel with timer, hour counter, main and emergency stop switches, and signal light. The maximum fill level is 40% of the drum volume, corresponding to 300 kg (200 kg workpieces + 100 kg deburring media such as manganese steel balls or cast iron pentagons). These are available from Sideros: manganese steel balls €400 per 100 kg & cast iron pentagons €950 per 100 kg. Dust extraction unit Sideros ECO A (see photo 8) optionally available for €1,900 + VAT. The manufacturer recommends sending 100 kg of sample material for test deburring to the Italian plant before ordering. Otherwise, the manufacturer accepts no responsibility for the deburring results. Warranty: 12 months for single-shift operation. When replacement parts are supplied, defective parts must be returned. Downtime of the machine is not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM. Bedpfxeu Uu T Rs Abhscu

Stanje: novo, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. Integrated synergic functions facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to guarantee perfect quality. MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (reverse polarity): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Bcodpfx Aomxkdpobhou Gouging.

Stanje: novo, Leto izdelave: 2025, Pressure: 40 t Bedpfxsvx Dwre Abhecu Stroke: 250 mm Table size: 625 x 1100 mm Flat bar (flat): 200 x 20 mm Maximum pipe diameter: 2" Table height: 950 mm Working speed: 9.1 – 4.7 mm/sec Return speed: 45 mm/sec Machine weight: approx. 750 kg Space requirements: approx. 1.25 x 0.9 x 1 m Total power requirement: 3 kW Oil capacity: 45 l New hydraulic horizontal bending press with 4 advantages over other manufacturers: 1) Infinitely variable pressure regulation UNDER LOAD with hand wheels 2) UNDERSLUNG cylinder allows 360° bending! 3) Operation from the front rather than the side 4) Patented tapered tool holder In addition, immersion depth and return point can be set via hand wheel, infinitely variable feed rate adjustment. Machines also available in the following sizes: Pressing force from 22 to 150 t, stroke from 200 to 450 mm, as well as with 2-axis control (immersion depth + lateral stop). A wide range of tooling for various applications available on request. SIMASV bending presses have been quality machines since 1957.

Leto izdelave: 2024, Stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Bedshx Elfjpfx Abhscu Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, delovne ure vretena: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h Travel ranges: X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Color Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Bodpfsw Au H Rox Abhscu Fully operational, very good condition. Dismantled, stored and immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4012M-4212, merilno območje os X: 900 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, teža obdelovanca (maks.): 1.200 kg, Oprema: Na voljo je tipska ploščica, Tehnični podatki: Tip stroja: Mitutoyo STRATO 9106 FAL-A910 Leto izdelave: 2001 Merilno območje: 900 x 1000 x 600 mm Programska oprema: Mitutoyo Software v2.4.R11 Bcodpfoqz T H Aox Abhsu Oprema: Nosilec glave: Renishaw SP80 Merilna glava: Renishaw SP80 Dodatna oprema: kalibracijska keramika, različne merilne kroglice in podaljški, Renishaw menjalna enota, pritrdilni set s 4 x SCP80 in nosilec za tipalo Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Stanje: rabljeno, Pressure: 75 t Stroke: 250 mm Clearance between uprights (length/side): 800 x 215 mm Installation height: 170 - 885 mm Operating pressure: 7.5 - 8.5 bar Machine weight: approx. 0.45 t Dimensions (L x W x H): 1.2 x 0.8 x 2.1 m Hydraulic/pneumatic workshop press Bcodpfx Abeupxr Ujheu Cylinder can be shifted laterally Pneumatic foot pedal Winch for table height adjustment 2 press blocks CE marking

Leto izdelave: 2004, Stanje: delavnici obnovljeno (rabljeno), No. 2054 1 used, partially overhauled and function-tested Extruder Alphatec Type AE-S 75.28 Screw diameter: 75 mm – 28 L/D Bcjdpfx Asiyya Asbhou Drive: 75 kW, AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – new control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Stanje: novo, – Polavtomatska – Hidravlična Bcodpfxoh Razfe Abhju – 2 hitrosti – Dvojni poševni rez – Tlak rezanja hidravlično nastavljiv – Hlajenje – List žage 2730 x 27 x 0,9 mm – Nožni krmilnik – Nujna zaustavitev – Dokumentacija – 400V