Hidravlična stiskalnica

Hidrogarne MV-300E/NC

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Ihedpfoph Uk Nex Af Tst Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: rabljeno, Leto izdelave: 2004, Presskraft: 630 t Hub: 800 mm Ständerweite: 2.600 mm Abstand Tisch/Stößel (bei oberem, verstelltem Hubanschlag): 1.500 mm Tischfläche: 2.500 x 1.300 mm Ziehkissendruck (im Tisch): 300 t Ziehkissenhub (im Tisch): 300 mm Stößelfläche: 2.500 x 1.300 mm Seitlicher Ständerdurchgang: 1.040 mm Abwärtsgeschwindigkeit: ab 600 mm/sec Aufwärtshub-Geschwindigkeit: 360 mm/sec Arbeitsgeschwindigkeit: 14 – 42 mm/sec Antriebsleistung: 145,0 kW Maschinengewicht: 85,0 t Platzbedarf (BxTxH): 4,2 x 4,0 x 7,8 m Bauhöhe über Flur: 6,80 m Bauhöhe unter Flur: 1,0 m Vorführmaschine aus einer technischen Hochschule mit ca. 920 Betriebsstunden – neuwertiger Zustand! Für Handbeschickung gemäß CE-Norm zugelassen. Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, oberer und unterer Hubbegrenzung, Lichtschranke (Sick) vorder- und rückseitig, hydraulischem Ziehkissen im Tisch inkl. Auswerferfunktion, hydraulischer Schnittschlagdämpfung, mechanischem Tiefenanschlag über 4 motorisch verstellbare Spindeln, hydraulischer Stößelverriegelung, Zweihandbedienung, 2 Werkzeugwechselkonsolen, 4 hydraulische Kugelrollenleisten im Tisch, 4 Schwingelemente. English translation: Press force: 630 t Stroke: 800 mm Isdpfxev Svaro Af Tjht Upright clearance: 2,600 mm Distance table/ram, max. stroke up (adjusted): 1,500 mm Table size: 2,500 x 1,300 mm Cushion force in table: 300 t Cushion stroke in table: 300 mm Ram area: 2,500 x 1,300 mm Side frame pass opening: 1,040 mm Downward speed: from 600 mm/sec Upward speed: 360 mm/sec Working speed: 14 – 42 mm/sec Drive motor power: 145.0 kW Machine weight: 85.0 t Space requirements (W x D x H): 4.2 x 4.0 x 7.8 m Overall height above floor: 6.80 m Foundation pit depth below floor: 1.0 m Demonstration machine from a technical university with approx. 920 operating hours – as new condition! Approved for manual loading/unloading according to CE standards. Equipped with electro-hydraulic drive, pressure/time/position-dependent controls, upper and lower stroke limit, light barriers (Sick) front and rear, hydraulic die cushion in table incl. ejector function, hydraulic cutting shock absorber, mechanical depth stop via 4 motorised spindles, hydraulic ram locking, two-hand operation, 2 die change consoles, 4 hydraulic ball roller strips in the table, 4 vibration-damping elements.

Stanje: dober (rabljeno), Leto izdelave: 2004, Swing diameter over bed Ø 320 mm Swing diameter over cross slide 150 mm Turning length 750 mm Spindle bore 52 mm Spindle power 16 kW Quill diameter 60 mm Ijdpfx Afowu Dq As Toht Quill stroke 140 mm Spindle taper 4 MT Spindle speed 3000 rpm Feed rate X-axis 1000 mm/min Feed rate Z-axis 2000 mm/min

Leto izdelave: 1978, Stanje: rabljeno, Pressure 100 t Outreach 380 mm Ihedolp U Dpopfx Af Tjt Stroke 400 mm Drive power 22 kW Installation height 600 mm Ram surface 600x500 mm Table surface 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure shut-off, Pressing time

Stanje: rabljeno, Leto izdelave: 2007, Tlak 315 t Razmak stebrov 1750 mm Hod 700 mm Razdalja med mizo in batom, pri največjem hodu zgoraj, nastavitev zgoraj 1200 mm Površina mize 1600 x 1500 mm Vlečna blazina v mizi, tlak 125 t Vlečni hod blazine v mizi 200 mm Površina vlečne blazine 1200 x 1400 mm Višina mize nad tlemi 750 mm Površina bata 1640 x 1500 mm Iodevuukbjpfx Af Teht Pogonska moč 55,0 + 11,0 kW Teža 29,5 t Prostorske dimenzije (ŠxGxV) 3,2 x 4,5 x 5,8 m Višina nad tlemi 5,1 m Letnik izdelave 1983 2007 modernizacija krmiljenja Siemens S 7 Odobreno za ročno polaganje v skladu s CE-standardom z oljno-hidravličnim pogonom, hidravlično vlečno blazino v mizi, hidravlično blažitvijo reza lahko se ponudi brez zagona, z zagonom v obstoječem stanju ali alternativno z novo krmilno enoto Siemens S 7-1500 F.

Stanje: zelo dobro (rabljeno), Pressing force: 300 TON Model: 2MR Year of manufacture: 2000 Iodsq N Etzopfx Af Teht Table dimensions: 1,750 x 1,250 mm Slide adjustment: 160 mm Continuous speed (variable): 10–30 spm Slide stroke: 250 mm Shut height: 500 mm Main motor power: 32 kW Hydraulic safety: present

Stanje: rabljeno, Leto izdelave: 2005, Tlak 800 t Razmak između stupova 2560 mm Hod 1050 mm Udaljenost stol/klip, hod gore 1870 mm Površina stola 2500 x 1730 mm Tlak vučne jastuke u stolu 300 t Hod vučnog jastuka u stolu 395 mm Površina vučnog jastuka u stolu 2300 x 1300 mm Površina klipa 2500 x 1730 mm Tlak vučnog jastuka u klipu 63 t Hod vučnog jastuka u klipu 150 mm Bočni prolaz između stupova 1000 mm Kapacitet ulja 4300 l Snaga pogona 200,0 kW Dimenzije (ŠxDxV) 4,1 x 2,8 x 10,0 m Visina iznad poda 7,0 m Godina proizvodnje 1974 Generalno obnovljen 2005: bivši BZE 800, prepravljen od strane proizvođača sa novim klipom i novim cilindrom na ZE 800 sa uljno-hidrauličkim pogonom, hidraulički kontroliranim vučnim jastukom u stolu i klipu rastavljen i uskladišten - video kod prodavatelja dostupan prije demontaže Iedpfx Afsvuuiko Toht

Leto izdelave: 2020, Stanje: kot nova (razstavni stroj), Hydraulic press for die testing and adjustment Brand: MHG Model: ER.2S.DM-300/2100 Serial no.: 927 Year: 2020 Required power: 40 kW Hydraulic oil: 1000 l reservoir + 200 l circuit fill Total number of cycles: 403 (AS-NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300 t Number of cylinders: 3 Maximum tooling dimensions: 1400 x 1400 mm Maximum tooling mass: 16,000 kg Maximum opening between fixed and moving tables: 1690 mm Iodpfok Sgvyox Af Teht Minimum opening between fixed and moving tables: 960 mm Maximum stroke of moving table: 730 mm Approach speed: 92 mm/s Return speed: 93 mm/s Stop time: 0.2 s Safety distance: 500 mm Weight (empty tank): 35,000 kg

Stanje: rabljeno, Leto izdelave: 1999, Pressure: 400 t Stroke: 800 mm Upright distance: 2820 mm Lateral passage between uprights: 950 x 1100 mm Distance table/ram (stroke up): 1600 mm Table surface: 2800 x 1200 mm Cushion force in table: 150 t Cushion stroke in table: 200 mm Cushion area in table: 2000 x 800 mm Table height above floor: 650 mm Ram area: 2800 x 1200 mm Speed down: 420 mm/s Speed up: 300 mm/s Working speed: 17.5 - 29.5 mm/s Oil capacity: 2500 l Drive power: 75.0 + 22.0 kW Isdjv Sva Sjpfx Af Tjht Weight: 50.0 t Space requirement (WxDxH): 4.1 x 2.8 x 7.2 m Height above floor: 6.15 m Approved for manual loading operations according to CE standard with oil-hydraulic drive, pressure/time and stroke dependent controllable, hydraulic cushion in table, hydraulic ram locking, two-hand and four-hand operation

Stanje: rabljeno, Leto izdelave: 2018, Pressure 315 t Stroke 750 mm Upright width 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface 1600 x 1300 mm Blank holder pressure in table 125 t Blank holder stroke in table 350 mm Blank holder pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Lateral upright clearance 1100 mm Speeds down 400 mm/s Speeds up 400 mm/s Working speed 12 - 44 mm/s Oil capacity 2500 l Drive power 35.0 kW Weight 43.50 t Space requirement approx. 3.6 x 3.1 x 6.0 m Overall height above floor 4.9 m Year of construction 1987 - 2018: new Siemens S7 control New front light barrier (Sick C 4000) Iodpsvuuf Eofx Af Tjht Approved for manual loading/unloading according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table, cutting stroke damping, ram locking, pressure/time/distance-controlled, two-hand operation Press can be inspected in running condition at our warehouse.