Hidravlična stiskalnica

Hidrogarne CD-50NC

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Lodpfx Aofxyhfjbbjrg Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: novo, Pressure: 30 t Stroke: 350 mm Table working area (width): 750 x 260 mm Pressure: 221 bar Oil capacity: 37 dm³ Maximum working speed: 9.8 mm/sec Return speed: 14 mm/sec Total power requirement: 3 kW Ledoi A S I Dspfx Abbsrg Machine weight: approx. 385 kg Cylinder inner diameter [mm]: 130 Piston rod diameter [mm]: 55 Piston bottom diameter [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Height-adjustable worktable - Joystick for piston and speed control The workshop press (30T) features a fixed cylinder and a motorized, height-adjustable worktable. It is equipped with pressure regulation, a pressure gauge, variable speed settings, and a joystick for controlling the piston movement and speed. The joystick allows both vertical piston movement and speed adjustment, making this motorized hydraulic press ideal for precision work.

Stanje: rabljeno, Leto izdelave: 1997, Pritisk 40 t Razdalja izhoda 300 mm Hod 630 mm Vgradna višina 900 mm Površina mize 620 x 520 mm Prebojna odprtina v mizi 150 mm Višina mize nad tlemi 600 mm Površina batnice 150 mm Skupna potrebna moč 15,0 kW Teža stroja cca 4,5 t Potrebni prostor cca 1,0 x 1,9 x 3,0 m Dovoljeno za ročno upravljanje v skladu s CE standardi Z oljno hidravličnim pogonom, krmiljeno po tlaku/času ali hodu, dvoročno upravljanje Stiskalnico si je mogoče ogledati v delovanju v našem skladišču Lrsdsvuuckspfx Abbog

Stanje: rabljeno, Technical Details: Pressing force: 100 t Installation height: Table/Ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 200 mm/s Ram return speed: 200 mm/s Table size: 750 x 560 x 90 mm Passage in table: Ø 26 mm Ram mounting surface (W x D): 530 x 400 mm Pin hole in ram: Ø 50 mm Lsdpfxsvc Ax Ne Abberg Cylinder diameter: Ø 250 mm Height above floor: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Stanje: rabljeno, Leto izdelave: 1983, Technical Specifications: Lrjdpsu Nfvuofx Abbog Press force: 160 t Throat depth: 360 mm Ram stroke (max.): 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4 x Ø 62 mm Ram speed forward: 200 mm/s Ram speed return: 125 mm/s Ram surface: 450 x 850 mm Borehole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m Manual counter i.O.

Stanje: rabljeno, Leto izdelave: 1986, Tlak 160 t Izvesek 360 mm Hod 500 mm Hitrost dol 200 mm/s Hitrost gor 125 mm/s Lrsdpfev Rgwxex Abbsg Najv. razdalja miza - bat 1000 mm Površina mize 900 x 630 mm Površina bata 850 x 450 mm Vpenjalni zatič premer x globina 50 H7 / 85 mm Skupna moč 17 kW Teža stroja pribl. 7 t Potrebni prostor pribl. D x Š x V 1,25 x 2,2 x 3,45 m

Leto izdelave: 2025, obratovalne ure: 10 h, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C1-25sE_1, CrimpOne C1-25sE – Made in Finland Servo-Electric Hose Crimping Machine with Spindle Drive Technical Specifications Lrodpfxjvr Dnke Abbsg Main Technology: AC Servo Ball Screw Max. Crimping Force: 250 kN Crimping Range: 10 – 54 mm Max. Hose Size: 1¼ inch Master Die D / L: 84 / 78 mm Servo Motor: 5 kW Repeatability: 0.01 mm Max. Opening: +100 mm Max. Insertion Channel: 45 mm Max. Closing Speed: 80 mm/s Max. Opening Speed: 80 mm/s Max. Crimping Speed: 10 mm/s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 – Omron Touchscreen

Stanje: novo, Tlak 30 t Hod 400 mm Prehod med stebri vzdolž/prečno 740 x 300 mm Vgradna višina 900 mm Volumen sistema 6,5 l Hitrost navzdol 7,5 mm/sek Lodeitt S Tspfx Abborg Hitrost navzgor 12,5 mm/sek Moč motorja 2,2 kW Teža stroja pribl. 0,6 t Dimenzije pribl. 1,35 x 0,85 x 2,1 m Visokokakovostna hidravlična stiskalnica omogoča ročno in motorizirano upravljanje. Cilindri se lahko pomikajo bočno. Varnostni ventil v končnem položaju cilindra. CE oznaka.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, številka stroja/vozila: NEBR-4397, Here are the technical specifications of the offered machine: If this press does not exactly meet your requirements, you can request a customized offer tailored to your needs with just one click: Contact us for a custom offer HIDROBRASIL manufactures presses exactly to your specifications at surprisingly affordable prices! ##### Technical Details - Pressure: 15 t - Stroke: 160 mm - Machine weight: approx. 330 kg - Oil tank: 10 l - Robust machine frame with sturdy welded construction, built according to DIN 8651 ##### Additional Information - Low-maintenance and reliable thanks to robust technology - Cylinder with induction hardening and chrome plating - Steel quality: construction steel LCG ASTM A36 - Four support feet with M30 bores for floor anchoring ##### Equipment - 1.5 T rotating mandrel attachment, mechanical, with locking device, serrated shaft, brake, and 220 mm travel - Hydraulic hand pump with max. 15T pressure and 160 mm travel, with return spring - Throat depth (back wall to center of tool fixture): 280 mm - Assembly table swivels 180 degrees to the right, central bore 60 mm, M12 T-slots - Clearance height between the swivel table and ram/mandrel guide: 450 mm - Clearance height with optional insert table: 650 and 800 mm - Optional insert table, central bore 60 mm, M12 T-slots, size 270x200 mm - Base height with two compartments for insert table: 750 mm - Hardened pressure plate on the cylinder, 10 mm larger diameter than the cylinder Lrsdpfx Ajfhcc Ijbbeg - Tool mount in cylinder head: M30 - Pump lever moves from top to bottom - Oil tank for 10 L hydraulic oil AW 46 - Machine frame painted blue, RAL 5012, textured coating - Attachments painted anthracite, RAL 7021 - Hydraulic single-column combination press as a custom machine, 15 tons, manual operation (C-frame press, hydraulic press) ##### Looking for a made-to-measure machine? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which builds upon these standards. Our core strength lies in special-purpose machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.

Stanje: dober (rabljeno), Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat (C side): 360 mm Specifications Metric US Standard Capacity: 160,000 Table length: 1250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Working speed: 10 mm/min Return speed: 125 mm/min Power: 22.5 kW Ljdpfx Aswp Nv Hebberg Dimensions (approximate) Length: 2150 mm Width: 1250 mm Height: 3600 mm Weight: 7500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.