Grelna stiskalnica okvirna stiskalnica

Hidrobrasil 160T Vulkanisierpresse

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Underfloor press Lodpfskuz T Ujx Aacsrh Pressing force: 300 kN Pressing area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Control system: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: UP 20_LIND, Used Motoman HP20 Model: HP 20 Controller: NX100 Lrodpfsfd Drrex Aacsh Year of manufacture: 2004.09 Payload: 20 kg

Stanje: rabljeno, številka stroja/vozila: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double-roll feeder: left side Adjustable stroke: 16–40 mm Distance between columns: 330 x 300 mm Required floor space approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, air clutch, BRUDERER precision double-roll feeder left Lodpscxxycofx Aacerh

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm Ljdpfx Aaogg Nv Iscorh - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement - Digital readout for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation - 400V

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. Lrodpfefxyhfox Aacoh The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna višina: 47.000 mm, skupna širina: 27.000 mm, skupna dolžina: 25.000 mm, širina mize: 1.000 mm, dolžina mize: 1.800 mm, skupna masa: 43.000 kg, širina plošče bata: 600 mm, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Sick light barrier Separate Rittal control cabinet Lrodpfxstiwgis Aacoh Side walkways/access passages Floor-level installation

Leto izdelave: 2024, Stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Lodpfx Ajftdh Isacjrh Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.

Leto izdelave: 1993, Stanje: rabljeno, Bending length: 3,000 mm Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Throat depth: 220 mm Total power requirement: 15 kW Ljdpfx Aekh Niqjacerh Machine weight: 11,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Cryogenic gas semi-trailer for LNG (liquefied methane). Manufacturer: CRYOCAN EU approval. Year: 2011 Lredpfetulh Iex Aacjh Volume: 50.25 m³ Vacuum certificate We also have other tankers for LIN, LOX, LAR, LNG, and CO2 Argon, oxygen, nitrogen and carbon dioxide, methane, hydrogen

Leto izdelave: 1993, Stanje: rabljeno, TYPE: DEA 400/2000 Year: n.d. Lredjihf R Uspfx Aacsh Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Height Above Floor: 5,800 mm Distance Between Uprights: 3,400 mm Lateral Window: 1,600 mm