Stiskalnica za lepljenje 12x 10 T

HIDROBRASIL 120 Tonnen Verleimpresse

Leto izdelave: 2023, Stanje: novo, In the area of 3D thermoforming, we also offer presses, turners, foil carousel storage systems, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top-quality and suitable for all membrane presses (foil and veneer presses). You can purchase our membranes either pre-cut to your required dimensions or as roll stock. SILICONE Type: MS-2 Colour: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Lhsdpfxed S Efao Abbeb Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Colour: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore hardness: approx. 42°/60° Shore Thickness: 3.5–4 mm Operating temperature: max. 130°C Standard SILICONE Type RSS Colour: red-brown or transparent (other colours available upon request) Surface: both sides smooth Standard length: cut to size or 10 m rolls (other lengths available on request) Standard width: 1200 mm (up to 1800 mm available on request) Polymer: silicone Shore hardness: 30°–80° Shore Thickness: 0.5–10 mm

Stanje: rabljeno, Leto izdelave: 2004, Kompaktna polavtomatska čelilna spajalna linija, sestavljena iz: - Rezkalnik PJ 150/500 - Prenosne mize za ročni prenos Ljdpjw Nbacofx Abbshb - Enokanalne stiskalnice PJ 7/6100 li Rezkalnik: 2 paketa/min Stiskalnica: 2 cikla/min Vhodna dolžina: 150 – 700 mm Končna dolžina: maks. 6.100 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Main motor: 18.5 kW Tool dimensions: 250 x 160 mm Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Lhjdpfx Abelu D Tfebeb Specification Values Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Hydraulic power unit: 3 kW / 140 bar

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Lhsdpfxod H Sc Es Abbeb Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg

Leto izdelave: 2023, Stanje: novo, Fully Automatic Orbital Stretch Wrapper SPINNER 1000s Lhjdpfefuwg Iex Abbeb Application: Packaging, bundling, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator Side: - Right-hand operation in feed-through direction General Technical Data: - Main motor power: 1.5 kW - Max. ring rotational speed: 80 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Standard Equipment: - Powered conveyor (infeed and outfeed) for automatic product feeding - Adjustable ring speed - Adjustable stretch tension with mechanical brake system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear hold-downs that press from above to secure the product during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touchscreen for machine parameter adjustment according to product requirements - Operator safety systems Optional Equipment: - Various types of conveyors - Infeed and outfeed rollers - Bubble wrap unit Technical Features: Wrapping Sizes: - Max. length: unlimited - Min. size (WxHxL): 100x18x550 mm Conveyor Functions: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m/sec - Load capacity: 100 kg/m Stretch Film Properties: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, dolžina pomika po osi Y: 6.000 mm, Tipper bed for logs up to 6 m long. Ledpfx Aor Iig Debbohb Available from September 2024.

Stanje: rabljeno, prevoženi kilometri: 64.129 km, moč: 120 kW (163,15 KM), prva registracija: 02/2017, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: srebrn, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 7.850 mm, skupna širina: 2.130 mm, skupna višina: 2.300 mm, dolžina tovornega prostora: 4.980 mm, širina tovornega prostora: 2.100 mm, Leto izdelave: 2016, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Complete combination with premium Fitzel superstructure on Sprinter and trailer Equipment: * Air conditioning, driver’s seat with heated suspension, * Double passenger seat, * 7G-Tronic Plus automatic transmission with cruise control, * Tow hitch (3,500 kg) with 13-pin trailer socket, * Fuel tank: main tank 100 L, * Rear wall trim, * Heat-insulating glazing, Lodpfxjqu Hzte Abbohb * Double passenger seat, Technology/Electrics/Comfort: * Becker MAP Pilot navigation system, * Outside temperature display, * Roof control unit with reading spots for driver/passenger, * Preparation for digital tachograph, * Electrically adjustable and heated exterior mirrors (both sides), * Additional reinforced battery, * Split-charge relay for auxiliary battery, Safety/Environment: * Bi-xenon headlights with cornering lights, * Driver’s airbag, * Brake assist, * Braking system with ABS+ASR, * Hill-start assist, * Suspension for application B: reinforced front and rear stabilizers, reinforced shock absorbers, reinforced front axle, * Low emissions according to Euro 6 emissions standard, Other: * Wheelbase 4,325 mm, * Engine 2.1 L – 120 kW CDI CAT, * Payload 1,460 kg as per registration certificate * Permissible total weight 3.5 t Incl. matching Fitzel 3-axle vehicle transport trailer, Fitzel 35-23/83T, * Loading area 8,280 mm x 2,300 mm, * Loading height approx. 680 mm, * Overrun braked, * 100 km/h approval, * Drive-over ramps, * Knott axles, * Tire size 195/55R10C, * Payload 2,610 kg, * Permissible total weight 3,500 kg Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim near Bremer Kreuz. NutzfahrzeugZentrum Behnke consistently offers around 200 vehicles, ranging from vans and commercial vehicles to construction machinery! We continuously offer attractive financing options with special conditions. If interested, we will gladly provide you with a tailored quotation! Trade-in of your commercial vehicle or construction machinery is welcome. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical and data transmission errors. Listed equipment must be checked separately if necessary. Subject to error and prior sale.

Stanje: rabljeno, Cut Thickness Calculator for Band Sawmill Cutting Thickness Computer Alternative to Mudata control system with option for individual customization Industrial Touch PC Siemens Simatic S7 Compatible with rotary encoder or other measurement systems Cutting programs can be easily modified Cutting programs can also be grouped Software is customized according to customer requirements Operation possible via touch display or keyboard Ljdpfx Abeiwaxnjbjhb Next step in the cutting program can be triggered by button on the joystick All relevant values can be displayed individually on the display (e.g. total distance, next cut, complete cutting program, value of previous cut, feed rate, and more) All parameters can be displayed and modified on a dedicated parameter page or on the main screen The sensor for blade deviation monitoring can be evaluated (possible linkage with feed rate) Positioning via proportional valve and hydraulic motor or via stepper motor Inspection during operation is also possible on request Currently in operation on Primultini SGA 1300 CEB Suitable for any carriage size and any make For an appointment or further details, please just call.

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Lodpfxsihpn Ns Abbehb Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Lhjdpfeh Ayyqex Abbsb Complete line: 11.5 m Technical information subject to correction.