Avtomatska stružnica

HESTIKA HR42

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement Kwedpfsd E A I Iox Abbjt - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Stanje: dober (rabljeno), Leto izdelave: 2013, BAR AUTOMATIC LATHE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Kwjdpfx Ajwc Amxobbjt Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1400-2800 rpm Bar feeder included!

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, STAR SH-12 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - STAR SH-12 CNC automatic lathe - Bar feeder - Coolant pump - Transformer For the exact scope of supply, please refer to the photos. Kjdpfx Abjvllmhjbewt We do not assume any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 10.000 mm, skupna dolžina: 12.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/10M has been extensively rebuilt and modernized by us. It features technical specifications that are fully compliant with the technical and operating documentation of a new machine, meets the technical acceptance requirements of the WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul upon order, delivery time 3.5 months from commissioning Technical data: Ksdpfxova Ebnj Abbjwt - Centre distance/turning length: 10,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 12,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool post Additional equipment available at extra cost: - 3-jaw or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. Kwjdpfx Ajtzdyzsbbjt • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: rabljeno, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Number of strokes 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Kwsdju Uu S Topfx Abbot Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping in table Change gears

Stanje: dober (rabljeno), Wheel diameter – max. 180 mm Wheel width 58 mm Module – max. 4 Module – min. 0.5 Strokes per minute 200 – 710 Total power requirement 3 kW Machine weight approx. 3 t Good condition, change gears, etc. Kwedpfouayw Ssx Abbjt Year of manufacture approx. 1964

Stanje: novo, Leto izdelave: 2025, Metal Lathe TYTAN 750 PRO (VARIO) 400V (without base) with variable spindle speed. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming holes. Typically used in small industrial workshops, repair shops, garages, etc. This machine version is supplied without a base. The universal TYTAN 750 PRO lathe, thanks to its infinitely variable spindle speed adjustment, is an ergonomic machine that meets user demands. Reduced setup time when processing parts of different sizes translates into improved efficiency and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via DC motor and voltage regulator. This ensures optimal rotational accuracy of the lathe chuck, resulting in high-quality machining of workpieces. Key advantages: Kodovvlxlepfx Abbswt - Modern DC motor with infinitely variable spindle speed ensures convenience and reduces calibration times. - LCD screen with spindle speed display allows control and quick adjustment of spindle speed during setting of cutting and threading modes. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels, and high (100-2250 rpm) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2-3.5 mm); imperial – 21 pitches (8-56 TPI). Left- and right-handed thread cutting available. - Automatic longitudinal feed with 6 speed settings (0.07 to 0.40 mm/rev) – significantly reduces processing time without compromising machining quality, especially for long parts. - Fully compliant with EU (CE) directives as well as Polish and DIN standards. Technical specifications: - 3-jaw chuck: 125 mm - Max turning diameter over bed: 250 mm - Turning diameter over cross slide: 150 mm - Turning length between centers: 750 mm - Max workpiece length (chuck/center): 700 mm - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Max tool size: 12 x 12 mm - Compound rest travel: 70 mm - Cross slide travel: 135 mm - Longitudinal travel: 650 mm - Spindle speed regulation: stepless (L/H) - Spindle speeds: L: 50–1125 rpm / H: 100–2250 rpm - Number and range of metric threads: (18) 0.2–3.5 mm/rev - Number and range of imperial threads: (21) 8–56 TPI - Number and range of longitudinal feeds: (6) 0.07–0.4 mm/rev - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock quill taper: MT2 - Motor power S1/S6: 1.1/1.32 kW - Dimensions L/W/H (without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1999, Univerzalni orodjarski rezkalni stroj TOS FNGJ 32 3-osni digitalni prikazovalnik Heidenhain Letnik: 1999 Pomiki: X 600 Y 400 Z 400 Območje obratov: 40 – 2000 min⁻¹ Z naslednjo opremo: Toga kotna miza, vpenjalna površina 800 x 400 mm Vertikalna rezkalna glava Izvlečna vrtalna pinola Različni vpenjalni členi SK 40 Zaščitna naprava Posoda za ostružke Strojna svetilka Avtomatska centralna mazalna črpalka za osi X, Y, Z Naprava za hlajenje Kjdpfx Absxc It Iebewt 4 kosi strojevih nog

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Kwedpoh Hvk Aefx Abbjt Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition