Hidravlični valj

Herrenknecht Hub 310 mm Kolben Ø 115 mm

Leto izdelave: 1984, stanje: rabljeno, max. Schleifscheibendurchmesser: 40 mm min. Schleifscheibendurchmesser: 5 mm Gewicht: 0,9 t 2 Schleifscheiben mit Flansch 8 Spannzangen Prjdpfx Ascq Rv Uenpsc 1 Kühlmittelbehälter Mechanischer Vorschub mit Festanschlag Die Gelenkwelle für den Werkstückantrieb ist ausgeschlagen.

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Pedpfx Ajf Ep Dionperc Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control • Dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: dober (rabljeno), 1 used radial drilling machine Manufacturer: Stimin Model: GR 820 H Serial No.: 773 Year of manufacture: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Spindle taper: Morse Taper 6 Spindle stroke: 390 mm Prjdpetzctmefx Anpsc Spindle speeds: 24 steps, 20 – 1400 rpm Right/left rotation Feed: 12 steps, 0.045 – 1.5 mm/rev Motor power: 400 V / 14.5 kVA Arm and head clamping: electromechanical Distance from machined bed to quill: min. approx. 400 mm max. approx. 1800 mm Usable machine table with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Required space approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Leto izdelave: 2000, stanje: dober (rabljeno), Tank & Environmental Protection Wozniack – Certified Specialist Company According to the German Water Management Act (WHG) Dear Sir or Madam, We offer a 30,000-litre double-walled storage tank suitable for storing liquid fertilizer as detailed below. The storage tank is equipped with a factory-new inner liner made of plastic, resistant and certified for liquid fertilizer storage. An acoustic leak detection system is installed externally in a lockable protective box. In addition, the storage tank’s double wall is made of steel for extra safety. The plastic liner has general building authority approval, making it suitable and certified for the storage of liquid fertilizer (AHL), NOx reduction agents, AUS32, and AdBlue. Technical Specifications: - Nominal capacity: 30 m³ - Quantity: 1 unit - Condition: Used, but fully refurbished (cleaned, reconditioned, primed, and repainted) - Paint finish: RAL color; custom colors available upon request - Material: Steel-in-steel—Material grade S235JRG2 - Documentation: Manufacturer’s certificate/test certificate per DIN 6616 D/2 and type plate - Accessories include: * 1 dipstick * 1 vent nozzle * 1 filling nozzle (3") made of new V2A stainless steel * 1 new acoustic leak detector for double wall monitoring * 1 ladder * 1 suction line (3"), newly installed in V2A stainless steel - Design: Cylindrical horizontal tank with support feet/brackets Tank Dimensions: - Length: approx. 6,740 mm - Diameter: approx. 2,500 mm - Weight: approx. 6,500 kg - Installation: Above-ground Special Offer: Liquid fertilizer (AHL) tank systems available from 5,000 to 100,000 litres, as well as water and fire water tanks. Customization: Your input for customizing the tank system is welcome. All systems are thoroughly tested and inspected by our experienced staff at our facility. Delivery: Economical delivery can be arranged upon request. Site inspections of our systems are possible at any time. We also have a wide range of above-ground and underground tanks in various sizes available for immediate purchase on-site. Interested in our offer? Should you have any questions or specific requests, please feel free to call. Our experienced team will be happy to advise you. Price / Shipping: The price is ex-works Warstein, loaded free of charge. Delivery can be arranged at a competitive additional cost. Lead time: Immediate availability Invoice with VAT shown will be provided. Additional Services: We also purchase existing tank systems and, as a WHG-certified specialist company, can professionally empty, clean, dismantle, and transport them from your site. Best regards from Warstein, Prjdpfx Asc Nk Dyonpsc Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Stanje: rabljeno, Leto izdelave: 1978, Technical Details: Drilling capacity in steel (diameter): 100 mm Throat depth: 400 - 2100 mm Vertical boom adjustment: 100 mm Spindle taper: MK 50 Drilling depth: 415 mm Spindle stroke: 400 (scale) mm Column rotatable: 360° Column diameter: Ø 500 mm Distance spindle head – clamping surface min./max.: 400 / 1,800 mm Spindle speed range: 12.5 ... 1,600 / 15 steps rpm Feed: 0.063 ... 2.5 / 15 steps mm/rev Table clamping surface (L x W): 2,000 x 950 mm Total power requirement: approx. 35 kW Approx. machine weight without cube: 8.0 t Machine dimensions approx. (LxWxH): 3.40 x 1.16 x 3.51 m Additional information: - Spindle horizontal travel: 1,700 mm Equipment: - Incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, center bore Ø 35 mm; 6 T-slots), (vertical surface: 1,000 x 500 mm, 3 T-slots) - Control panel Predpfx Aneu Id Awspoc - Coolant system

Leto izdelave: 1984, stanje: rabljeno, številka stroja/vozila: 57051/4, Manufacturer: Rhode & Doerrenberg (May) Model: SS 40 U Serial No.: 57051/4 Year of manufacture: 1984 Weight: 950 kg General / Technical Data: Used drill grinding machine of German manufacture for 2-, 3-, and 4-fluted tools, in good condition. Diameter range: from 5 mm to 40 mm Tool length: 500 mm Point angle: from 80° to 160° Relief angle: from 1° 30' to 10° Prsdpfx Aec Nv S Aonpec Grinding wheel: 210 x 127 x 50 mm (cup wheel) Tool types: 2-, 3-, and 4-fluted drills and countersinks Grinding direction: For tools with left & right hand cutting Machine dimensions (L x W x H): 1350 mm x 1100 mm x 1400 mm Power supply / Control voltage: 380 Volt 50 Hz / 220 V Motor output / Total power: 2.2 kW / 2.55 kW Accessories / Special features: • 2 grinding wheel mounts with grinding wheels • 8 collets for drill holding, make: Forkardt • 6 Morse taper sleeves & drill extensions • Coolant system • Machine documentation & electrical schematic Remarks: The machine is stored at our warehouse, connected to power, and can be demonstrated by appointment.

Stanje: novo, Leto izdelave: 2024, Drilling capacity in steel (diameter): 35 mm Throat depth: 320 mm Drilling stroke: 150 mm Spindle taper: MT 4 Table size: 500 x 400 mm Spindle speeds: 75 – 3,010 rpm Quill feed range: 0.1 / 0.15 / 0.22 / 0.33 mm/rev Quill travel: 150 mm Operating voltage: 400 V Total power requirement: 1.8 kW Machine weight: approx. 275 kg Podpfxswlvlas Anpsrc Space requirement: approx. 0.70 x 1.00 x 1.95 m - Factory No.: 138050673 - Electromagnetic feed - Tapping device - Machine vice, 150 mm - Two T-slot bolts, 14 mm - 9-piece drill bit set 14.5 mm – 30 mm, MT2 / MT3 - Cutting oil spray

Leto izdelave: 2009, stanje: dober (rabljeno), Hidravlični cilinder, podporni cilinder, hidravlični bat, tlačni bat - Tlačna sila: pri 250 bar 96 t - Premer bata: 220 mm - Batnica: Ø 125 mm - Zunanji premer cevi cilindra: Ø 260 mm - Hod: 495 mm - Skupna dolžina v zaprtem položaju (sredina do sredine luknje): 1195 mm - Priključek batnice: Ø 100 mm - Priključek cilindra: Ø 100 mm Pedpfx Anodq U S Iepsrc - Univerzalna uporaba - Količina: 15 cilindrov na zalogi - Cena: na kos - Dimenzije: 1360/530/H300 mm - Teža: 364 kg/kos

Stanje: dober (rabljeno), Lifting capacity: 24t Ø98 x 315mm Stroke: 150mm, Cylinder Ø: 56mm Bore Ø: 27mm Prodpfjvwb Sdex Anpec Force: 238kN Approx. 130 units available Shipping from 10 pieces

Stanje: novo, Leto izdelave: 2026, Large and stable radial drilling machine with a wide speed range, ensuring precise and fast machining. Machine Features - Heavy weight and rigid construction provide excellent stability and vibration-free operation - Box-type worktable allows easy adjustment and mounting of the workpiece - Motorized arm height adjustment - Control panel located at the front of the machine for increased efficiency and ergonomic operation - Ground column surface ensures smooth, easy, and precise arm movement Podpfei D Da Aex Anpjrc - Drill equipped with manual head and arm column lock - Large speed range guarantees accurate and rapid drilling processes Technical Data MAX. DRILLING DIAMETER – 35 mm (cast iron); 30 mm (steel) DISTANCE FROM SPINDLE AXIS TO COLUMN – 360 - 1300 mm DISTANCE FROM SPINDLE AXIS TO TABLE SURFACE – 260 - 1300 mm SPINDLE STROKE – 200 mm SPINDLE TAPER – MT4 NUMBER AND RANGE OF SPINDLE SPEEDS – (6): 75, 130, 240, 380, 660, 1200 rpm NUMBER AND RANGE OF SPINDLE FEEDS – (3): 0.10; 0.16; 0.25 mm/rev VERTICAL ARM TRAVEL SPEED – 1.3 m/min ARM ROTATION – 360 degrees MAIN MOTOR POWER – 2.2 kW LIFTING MOTOR POWER – 0.75 kW WORKTABLE DIMENSIONS – 510 x 380 x 305 mm MACHINE DIMENSIONS – 800 x 1800 x 2150 mm WEIGHT – 1400 kg Standard Equipment - Drill chuck B16 (3-16 mm) - Arbor for drill chuck B16/MT4 - Reducing sleeve MT4/MT3 - Drift key The price quoted is NET (excluding VAT and transport costs). Transport costs are not included. For more information, please contact us by phone or email. Feel free to check our offer on our website.