Univerzalni obdelovalni center

Hermle C600U

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 430, največja hitrost vretena: 15.000 obr/min, število osi: 5, This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, an extended X-axis of 2010 mm, a C-axis rotary table, spindle speeds up to 15,000 rpm, and a capacity for 30 tools. The machine comes with a chip conveyor and a 200-liter coolant tank. If you are looking for a high-quality automation solution, you should consider the HERMLE C 600-U machine we are offering for sale. Contact us for further details about this machine. • Electronic thermal expansion compensation • Ethernet interface • Tool positions: 30 • MTS single magazine plate with 24 slots • Heidenhain SK 40 infrared probe • Tool breakage monitoring • C-axis: rotary table with worm gear • Rotary table diameter: 280 to 450 mm Rjdpfx Aex D Iywed Tobt • Extended X-axis: 2010 mm Application: prototype construction. The EROWA Robot easy Automation was manufactured in 2011 and has only a few operating hours! Operating hours for the automation: exact figures are not available as there is no operating hour counter in the automation system. Additional equipment: • Oil mist extraction • Electronic handwheel • Chip flush gun • Machine bed rinsing • NC rotary/swivel table • Air blow-off device • Enclosed roof • 200-liter coolant tank • Including 24 pallets and MTS Chuck S-P/A plus additional clamping devices, tools, etc. The spindle was overhauled last year and comprehensive maintenance was carried out during the last service. The EROWA Robot easy Automation was retrofitted in 2011, with a single magazine plate featuring 24 positions.

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Na voljo je dvo-vreteno stružno-rezkalni center Mazak. Hod X/Y/Z: 580mm/160mm/1545mm, os B: 225°, os C: 360°, razdalja med konicama: 1500mm, maks. premer struženja: 660mm, premer nad ležiščem: 660mm, hitrost glavnega vretena/protivretena: 5000obr/min, število orodij: 40+9, tlak hlajenja: 70bar. Dimenzije stroja X/Y/Z: cca 5200mm/2550mm/2600mm, teža: cca 14000kg, ure vretena: 24679h. Vključuje visokotlačno hlajenje, SMW luneto, SMW vpenjalno glavo, integracijo lunete, Renishaw sondo, merilno sondo, CAD/CAM programsko opremo Topsolid 7.18, oljni separator, postprocesor in Inspection-Plus paket. Stroj je bil večinoma uporabljen za fino obdelavo. Dokumentacija je na voljo. Ogled na lokaciji mogoč. Rbedpfjx Ih Dgex Ad Tst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 35.000 m/min, hitri pomik na osi Z: 35.000 m/min, teža obdelovanca (maks.): 200 kg, skupna dolžina: 500 mm, skupna širina: 400 mm, obremenitev mize: 200 kg, premer vrtljive mize: 280 mm, Kühlsystem Filtertank HR 410 Handrad iTNC530 Steuerung Maschine aus 1. Hand X-Achse: 600 mm Y-Achse: 450 mm Z-Achse: 400 mm A-Achse: 110° B-Achse: 360° Tischlänge: 500 mm Tischbreite: 400 mm Tischbelastung: 200 kg Tischdurchmesser Ø: 280 mm Vorschub X-Achse: 35.000 mm/min Vorschub Y-Achse: 35.000 mm/min Vorschub Z-Achse: 35.000 mm/min Vorschub A-Achse: 10°/min Vorschub B-Achse: 15°/min Werkzeugaufnahme: 40 ISO/BT/MK Leistung Spindel: 15 kW Drehzahl: 18.000 U/min Werkzeugwechsler: 30-fach IKZ: 20 bar Anzahl gesteuerter Achsen: 5 Späneförderer: Ja Kühleinrichtung: Ja Länge: 3.500 mm Breite: 3.500 mm Höhe: 2.800 mm Gewicht: 6.600 kg Bitte beachten Sie: Die Angaben auf dieser Seite wurden nach bestem Wissen und Gewissen von uns und – soweit möglich – vom Hersteller bezogen. Die Angaben erfolgen in gutem Glauben, für deren Richtigkeit wird jedoch keine Garantie übernommen. Sie stellen weder Zusicherungen noch Vertragsbedingungen dar. Wir empfehlen, alle relevanten Details zu überprüfen. Rodpfex R S Smsx Ad Tjbt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 18.396 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, model krmilnika: Heidenhain 530, število osi: 3, Leta 2022 so bila zamenjana vrata orodnega magazina. Leta 2023 je bil zamenjan servopretvornik SIMODRIVE 611/18A! TEHNIČNI PODATKI Pomik X-osi: 650 mm Pomik Y-osi: 450 mm Pomik Z-osi: 450 mm Vpenjalo orodij: SK 40 Število osi: 3 Rbsdpex Up E Eofx Ad Tjt PODROBNOSTI O STROJU Krmiljenje: Heidenhain 530 Obratovalne ure Ure vretena: 18.396 Ure stroja: 56.040

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Rjdpfx Adsx Eh Iqs Tsbt Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped 130 mm partially equipped Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Heidenhain TNC 426 control system Rbedpfjwhrfzjx Ad Tjt Travel paths X/Y/Z: 600/450/450 mm Spindle speed: 10,000 rpm Tool magazine for 30 tools, SK 40 taper

Stanje: dober (rabljeno), Leto izdelave: 1999, HERMLE C600 U 5-osni obdelovalni center z upravljanjem HEIDENHAIN ITNC430 Rbodpsx A Hgtjfx Ad Tot Dimenzija mize Ø280 mm (4 'T' utori). Največja nosilnost mize: 300 kg. Hodi osi: X=600 mm, Y=450 mm, Z=450 mm, B=220° (±110°), C=360°. Hitrost hitrega pomika: 30 m/min. Največja hitrost vretena: 12.000 obr/min. Stožec vretena: ISO 40. Menjalec orodij z 30 mesti. Serijska številka: 12859 (1999).

Stanje: rabljeno, Leto izdelave: 2001, Dolžina struženja 470 mm Maks. premer struženja 390 mm Število vrtljajev vretena 3500 obr/min Pomiki X/Z – 235/520 mm Rbodpfsxdfi Nsx Ad Tet Število postaj v revolverju 12 kos Krmiljenje: MSG 500 Oprema: Različni nosilci orodij

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm Spindle speeds: 16,000 rpm Control: HEIDENHAIN TNC 430 Number of axes: 5 simultaneous Rotary table: 360° Rbjdpfsvwgm Tex Ad Tjt Tool holder: ISO SK-40 Table diameter: 280 mm Rapid traverse: 30 m/min Tool changer: 30 positions Machine weight: approx. 6.5 t Space requirement: approx. 3100 x 2400 x 2500 mm This HERMLE C600U is in very good condition and immediately available. Operating hours: - Machine ON: 65,656 h - Spindle ON: 28,281 h Equipment & Description: - External coolant supply with 6 bar, 3 nozzles - Manual cabin roof - Electronic thermal compensation - Electronic handwheel (iTNC) - HEIDENHAIN measuring probe - Blum tool breakage control - Documentation / Operating manual - NEW CABARON air filter system, Type: COB-H10-2 (year 2012, never used) Option: - Various ISO SK-40 tool holders, 109 pieces

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 28.384 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15594, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, Kot zasuka osi A (min.): −90 °, zasukni kot osi A (maks.): 20 °, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm A-axis swivel range: +20° / -90° C-axis swivel range: 360° Rotary table diameter: 280 mm Spindle Data Spindle taper: HSK A 63 Tool changer: 30 positions Redpjvytgfefx Ad Tobt Feeds and Speeds Feed range: 1 - 30,000 mm/min Rapid traverse: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control on-time: 64,299 h Machine on-time: 61,676 h Program run time: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 h

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of magazine tools: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Required space: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 50223 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor Rsdpsup Hwxefx Ad Tebt - Oil mist extraction: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM