Obdelovalni center

Hermle C600 U / iTNC 530

Stanje: rabljeno, Leto izdelave: 2014, Swing over bed: 508 mm Turning length: 724.5 mm Control system: Hurco Ultimax Swing over cross slide: 336 mm Spindle speeds - stepless: 0-4500 rpm Spindle bore: 65 mm Feed rates: 0-30 m/min Rapid traverse in X and Z axes: 30 m/min Nodov T Np Aspfx Adpowp Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Required space approx.: 4.3 x 2.1 x 2.6 m Tool speeds: 0-5000 rpm Tool drive power: 5.5 kW Main drive motor: 15/22 kW Machine weight approx.: 5.6 t C-axis: 360 x 0.001 ° Equipped with a 12-position turret with driven tool stations (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Comes with extensive accessories.

Stanje: rabljeno, Leto izdelave: 2016, dolžina podajanja os X: 711 mm, dolžina pomika po osi Y: 406 mm, dolžina podajanja os Z: 394 mm, Pomiki osi X Y Z: 711 x 406 x 394 mm; velikost mize: 864 x 381 mm; nosilnost mize: 113 kg; hitrosti hitrega pomika: 61 m/min; moč vretena: 15 KM; hitrost vretena: 15.000 vrt/min; stožčasta vpetja vretena: BT40; 18-postajni avtomatski menjalec orodja (ATC); CNC krmilje Haas; hladilna tekočina; odvijalnik ostružkov. Nsdpev Sut Refx Adpjwp

Stanje: rabljeno, Leto izdelave: 2012, Maximum grinding diameter: 320 mm Grinding length: 1,500 mm Centre height: 160 mm Control: Touch Jones & Shipman Maximum workpiece weight between centres: 100 kg Table: Z-axis travel: 1,645 mm Feed rate: 0.0001 - 12 m/min Swivel range: +5 / -5° X-axis: X-axis travel: 260 mm Feed rate: 0.0001 - 6 m/min Grinding head: Grinding spindle motor: 7.5 kW Cutting speed: 45 m/s Grinding wheel Ø x width x bore: 450 x 50 x 203.2 mm Tailstock: Swivel range: -15 / +90° Speed range: 0 - 660 rpm Torque: 27 Nm Mount: MT 3 Total power requirement: kW Machine weight: approx. 8.5 t Space required: approx. 5.5 x 2.5 x 2.0 m Cylindrical grinding machine - External JONES & SHIPMAN - Suprema Easy 1500 E - Spare grinding wheel flange - Multi-grain diamond dresser (for peripheral and side dressing, 10 mm, 1 carat) Njdjtqmrpopfx Adpjwp - Tailstock with micrometer adjustment (max. adjustment travel ±0.05 mm) - Pneumatic quill retraction - Two-jaw steady rest (range 8-75 mm)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m Nedpjiva Dkefx Adpewp – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Tool pre-setting device Various SK40 tool holders Heidenhain TS32 touch probe (as new)

Stanje: novo, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m Nedpfx Aefg E Hyjdpswp SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant piece length of 60 mm. - The cross-section max. is 230x230 mm. - Numerically controlled band saw with the new Windows “CE” based system, specifically developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for the machine's operating functions, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure in accordance with the latest EN 13898/2007 machinery directive requirements. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) construction to compensate for vibrations, improve machine stability, and prolong band saw blade life.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Fanuc 21iTB control 16-position BT50 tool changer Worktables: 1600 mm diameter, maximum rotation speed 250 rpm, maximum load capacity 8,000 kg Maximum workpiece diameter: 2,000 mm; maximum machining height: 1,250 mm Cross slide: 250 x 250 mm; Z-axis travel: 900 mm Chip conveyor Nodpfxjwzyndo Adpjwp

Stanje: rabljeno, Leto izdelave: 2004, Technical data: Travel (X/Y/Z): 650 / 500 / 450 mm Clamping area: 1000 x 600 mm Nwedpfxowglapj Adpep Spindle taper: SK 40 Spindle speed: 6,500 rpm Maximum table load: 400 kg Number of tool magazine slots: 20 Power consumption: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Motor spindle 12,000 rpm - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain electronic handwheel - Menzel minimum quantity lubrication system - Approx. 25 tool holders

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.400 mm, premer vretena: 100 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 2.500 obr/min, The machine is in good technical condition, currently disconnected. Equipped with a Heidenhain TNC 530i control system, chip conveyor, and a 40-position tool magazine. Nodpfov Upbnjx Adpewp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Available directly from toolmaking department Vertical Machining Center Make: DMG Model: DMC 104 V Linear Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm Travel X-axis: 1000 mm Travel Y-axis: 600 mm Travel Z-axis: 500 mm Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 stations Nwjdpjt I Di Aefx Adpsp Equipment: • Linear drive in X-axis • Bed flushing • Spiral chip conveyor • Direct position measuring system • Drill breakage control via laser • Z-axis temperature compensation via sensor incl. active cooling unit • Internal coolant supply through the spindle • External air blast via 2 pipes • Coolant system 700 liters, paper band filtration system with high-pressure unit 40 bar • Visiport viewing window on operator door • Additional machine door on left side • Bader cooling unit on control cabinet • Prepared for connection of a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with seal air 0.5 bar

Stanje: rabljeno, Leto izdelave: 2000, Grinding length 1600 mm Grinding width 600 mm Workpiece height 500 mm Total power requirement 50 kW O F F E R We can offer you, ex-stock and subject to prior sale and errors: B L O H M CNC-controlled precision surface grinding machine Type PLANOMAT 616 with SIEMENS 840 D control Year of manufacture: 2000 Serial no. 14 67x _____ _____ Grinding range: 1,600 x 600 mm (!) Table size: 2,000 x 600 mm Working height under grinding wheel: approx. 150–500 mm Max. longitudinal travel (X axis): 1,700 mm Max. vertical travel (Y axis): 550 mm Max. cross travel (Z axis): 560 mm Maximum workpiece weight: approx. 800 kg Table speed (X axis): 30 – 30,000 mm/min Minimum transverse increment (Z axis): 0 – 4,000 mm/stroke Vertical increment (Y axis): 0.001 – 0.099 mm/stroke Feed rate Y/Z axes: 4 – 4,000 mm/min Grinding wheel Ø x width: approx. 400 x 100 mm Grinding wheel speed, continuously variable via GS motor: 300 – 1,250 rpm Spindle drive max.: approx. 27.5 kW Njdpfx Aet Hxcbodpswp Total power supply: approx. 50 kW - 400 V, 50 Hz Weight, total: approx. 10,000 kg Accessories / special equipment: • SIEMENS CNC control type 840 D with monitor; SIEMENS components, and WINDOWS-based interface Model MMC 103/PCU 50 with user guidance for direct input of all grinding parameters for roughing/finishing/sparking out as well as for slot grinding with (cross) indexing device and automatic shut-off after reaching grinding depth and return to home position; grinding wheel management, dressing programs/cycles, hand control, etc. • All axes driven by ball screw spindles, DITTEL touch control • Continuously variable grinding spindle speed via direct GS motor • Table-mounted diamond wheel dressing device type PEA, electrically driven, with DITTEL inductive device and separate straight dressing unit with diamond fleece, with compensation, dressing cycles integrated in the control • Fitted magnetic chuck approx. 500 x 1,500 mm by WAGNER with demagnetizing function • Fitted electrical cabinet, separate flanges with wheels, and independent oil mist extraction system; complete work area enclosure with one sliding door with glass insert • Large HOFMANN coolant system TECHNOPUR S 300 with cooling aggregate and grinding sludge conveyor, tank 1600 l resp. 1280 l, separate oil mist extraction, etc. Condition: Good to very good – demonstration available soon; extremely large and stable machine (!) Delivery: ex stock – as inspected Payment: net cash – upon receipt of invoice We look forward to receiving your order and have additional grinders of all kinds in stock. Please enquire.