Univerzalni obdelovalni center

HERMLE C 40 UP

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.000 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 18.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 38 Nm, skupna masa: 65.000 kg, Initial commissioning: 2012 Control: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (below floor) with T-slots 18H12 / 250mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power demand: 85 kVA Dimensions, weights Space required (machine only, without peripherals): approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Djdpfx Aeyrdc Eoc Nsch Additional equipment - Opening doors on both sides - 10-station tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 51.775 h, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, nazivna (navidezna) moč: 44 kVA, proizvajalec krmilnikov: Heidenhain iTNC 530, teža obdelovanca (maks.): 4.000 kg, skupna višina: 3.500 mm, skupna dolžina: 7.500 mm, skupna širina: 7.700 mm, dolžina mize: 1.500 mm, skupna masa: 35.000 kg, hitrost vretena (min.): 10.000 obr/min, Year of manufacture: 2006 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 1600 Travel Y-axis mm: 1250 Travel Z-axis mm: 1000 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: 0–190º Feed rates m/min: 60 Rapid traverse m/min: 60 NC milling/turning table: Pallet dimensions mm: Ø1500 x 1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Max. spindle speed rpm: 10,000 Spindle drive power kW: 44/32 (40/100% duty cycle) Spindle torque Nm: 288/187 (40/100% duty cycle) Cooling Dcodpfx Acsyq Rm Ij Njh Coolant supply through spindle bar: 40 Tank capacity liters: 980 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 Tool changer type: Double gripper With free adjacent slots mm: 250 With occupied adjacent slots mm: 130 Max. tool length mm: 650 Max. tool weight kg: 30 Chip-to-chip time sec.: 6 Equipment Chip conveyor Infrared probe Rotary viewing windows Rinsing gun Operating mode 4 Compressed air through spindle center selectable via M-function Machine operating time: Hours powered on: 98,398 Spindle operating hours: 51,775 Total power requirement kVA: 96.2 Base machine: Dimensions / Weight Length mm: 7,500 Width mm: 7,700 Height mm: 3,500 Weight kg: 35,000

Stanje: rabljeno, Leto izdelave: 2018, skupna višina: 4.000 mm, skupna dolžina: 5.100 mm, skupna širina: 3.800 mm, skupna masa: 20.000 kg, POS POSmill H 800 U 5-Axis Machining Center features a swiveling axis in the range of -120° to +120° and a rotary table with an infinitely rotating 360° C-axis. A separate A-axis is not included. The working area is equipped with a high-quality Kessler rotary table with a diameter of 800 mm; a pallet changer is not installed. Particular highlights include the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. Combined with the integrated 50-bar through-spindle coolant system, the machine is perfectly suited for demanding applications in tool and die manufacturing and the automotive sector. Operating Data: Control power on: approx. 25,280 h Machine power on: approx. 24,730 h Program run: approx. 9,150 h Spindle running hours: approx. 8,555 h Dcedpsy An A Eofx Ac Noh Spindle speed: 18,000 rpm Y-axis travel: 820 mm Dimensions (LxWxH) approx.: 5,100 x 3,800 x 4,000 mm Weight approx.: 20,000 kg Control: Heidenhain ITNC 530 Z-axis travel: 600 mm X-axis travel: 670 mm 5-axis machining: Yes Year of manufacture: 2018 Condition: fully functional Payment Terms: 100% prepayment before collection Delivery Terms: Ex-foundation Under power: Yes

Stanje: zelo dobro (rabljeno), Premer obdelovanca: 10 - 250 mm Dolžina navoja: 900 mm Navojni korak: 0,3 - 100 mm Vrtljaji vretena: 72 / 1700 - 2540 min⁻¹ Odrezovanje: 0,03 - 8 mm Maks. vpenjalna dolžina: 1190 mm Največji modul: 10 Dedpfx Ajyb S Rioc Noch Obdelovalni vrtljaji: 0,4 - 160 min⁻¹ Skupna potrebna moč: 13 kW Teža stroja približno: 7,4 t Potreben prostor približno: 4,5 x 2,0 x 2,1 m Veliko dodatne opreme: prirobnice, pretvorniki, naprave in valji za obdelavo, notranje brusno vreteno, podporniki ipd.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity Dcsdpfsyv In Iex Ac Neh

Stanje: rabljeno, Leto izdelave: 2004, x-Weg 650 mm y-Weg 600 mm z-Weg 500 mm Steuerung Sinumerik 840 D pl Siemens Drehzahlbereich - Hauptspindel 20 - 28.000 min⁻¹ Antriebsleistung - Hauptspindel 23 / 18 kW Max. Drehmoment 79 Nm Werkzeugaufnahme HSK-A63 Tischaufspannfläche Ø 630 mm Schwenkbereich A: +30° / -115° drehbar C: 360° max. Tischbelastung 500 kg Max. Werkstückabmessungen Ø 630 x 313 mm Tischdrehzahl A:25 / C:65 min⁻¹ Anzahl der Werkzeugplätze 117 pos. max. Werkzeugdurchmesser 90 (125) mm max. Werkzeuglänge 300 mm Dcjdjxmagzepfx Ac Neh Eilgang (X / Y / Z) 60 m/min Beschleunigung 10 m/s² Vorschubkraft 8,5 kN Gesamtleistungsbedarf 43 kVA Maschinengewicht ca. 10,5 t Raumbedarf ca. 8,5 x 5,5 x 3,0 m 5-Achsen CNC-Bearbeitungszentrum Universal HERMLE - C 30 UP Dynamic - FASTEMS - inkl. FASTEMS FPC-400 paletni sistem / 15 kom - Paletni izmjenjivač - Magacin alata sa 117 pozicija - oko 9.000 sati rada vretena nakon zamjene - FASTEMS računar ne radi

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Laserski varilni robotski sistem za varjenje jekla in nerjavečega jekla. Obseg dobave: 1 x YASKAWA 6-osni robot YASKAWA MH6 (nosilnost: 6 kg, doseg: 1422 mm, masa robota: 130 kg, letnik 2009.03) 1 x YASKAWA krmilnik DX100 (2009.03) 1 x IPG YLS-1000 ytterbium laserski vir, moč 1 kW (2011.05) 1 x IPG P30 laserska varilna glava s koaksialno šobo in kamero (2018.05) 1 x RIEDEL hladilni sistem za lasersko vodo (2011) 1 x Chilly-35-S hladilni sistem za optiko (2010) 1 x Siegmund varilna miza 1200x800 (2019) 1 x IPG WHAM škatla z alarmnim modulom za varilno glavo (2018.05) 1 x PC za upravljanje laserja z LaserNet programsko opremo Dcodpfsh Ad E Hjx Ac Neh Stroj je možno pregledati. Zelo dobro ohranjeno stanje. Priključen, možno testiranje. Dostava v države EU je naša odgovornost, stroški pošiljanja so brezplačni.

Stanje: dober (rabljeno), Leto izdelave: 2016, največja hitrost vretena: 3.500 obr/min, skupna masa: 6.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Glavni parametri: Krmilnik: FANUC 0iD/31iA Vpenjalna glava: SAMCHULLY 10" Vretenska odprtina: 86 mm S cevjo za zaščito: 78 mm Revolverska glava: 12 glavnih in 12 sekundarnih pozicij, priklop BMT65 Programabilna hidravlična konica: MT5 Moč glavnega vretena: 22 kW S1max=3500 1/min Moč pogonjenih orodij: 5,5 kW Djdpowtg Inofx Ac Nsch S2max=5000 1/min X-os gib: 260 mm Z-os gib: 830 mm Y-os gib: ±52 mm (104 mm) C-os Maksimalna dolžina struženja: L=760 mm Največji premer struženja: D=376 mm Hitri pomik: 30 m/min Avtomatsko merjenje orodja s sondo Teža: 6000 kg

Stanje: rabljeno, Leto izdelave: 2017, Fräsmaschinen Verfahrweg X: 800 mm Verfahrweg Y: 950 mm Verfahrweg Z: 1020 mm HSC-Maschine Anzahl der Achsen: 5 Fräsmaschine / Bearbeitungszentrum Steuerung: Siemens Sinumerik Spindelaufnahme: HSK 100 Spindeldrehzahl: 6000 U/min Drehzahlbereich bis: 6000 U/min Tischgröße X: 770 mm Tischgröße Y: 770 mm max. Werkstückgewicht: 800 kg Werkzeugwechsler: 60 - fach Antriebsleistung : 32 kW Drehmoment : 340 Nm Eilgang: 40 m/min Dedpfxoyzw Saj Ac Noch Vorschubgeschwindigkeit: 40 mm/min Spindelkühlung Späneförderer Steuerung Siemens 5-Achs CNC-Universal-Bearbeitungszentrum Für hochpräzise Fräsbearbeitung verschiedenster Werkstoffe Sehr stabile Bauweise für schwere Zerspanung Siemens Sinumerik Steuerung HSK100 Spindel, ideal für Stahlbearbeitung Hohe Prozesssicherheit und Zuverlässigkeit Geeignet für Automobil-, Maschinenbau- und Formenbauindustrie

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 25.000 h, skupna masa: 3.900 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-TD, število osi: 4, This 4-axis DOOSAN LYNX220LSYA horizontal lathe was manufactured in 2014. It provides robust performance for precision turning operations. If you are looking for high-quality turning capabilities, you should consider the DOOSAN LYNX220LSYA machine we are offering for sale. Contact us for more information. Machine Advantages Qualitative Machine Advantages • Adapter/housing set for internal machining • Preciflex live holder supplementary adapter set • A set of barely used tools is available at an additional cost. Technical Machine Advantages • External turning tool holder • Double external turning tool holder (left side) • Double external turning tool holder (left side) • Face machining holder • Internal machining holder • Double external turning tool holder (on both sides) • Triple internal machining holder • Axial driven tool holder (left side) • Axial driven tool holder (left side) • Radial driven tool holder Dsdpex D I T Refx Ac Nech Additional Information Machine still under power