Avtomatski stroj za prebijanje - dvojni stolpec

Helmerding KDH 400/2600/2

Stanje: rabljeno, Leto izdelave: 1988, Pressure 400 t Hedovuuknopfx Abxjnn Column spacing 1100 mm Stroke 250 mm Stroke rate 25 - 75 /min Distance table/ram, max. stroke up, adj. up 900 mm Table area 1100 x 965 mm Ejector force in table 30 t Ejector stroke in table 80 mm Ejector force in ram 3 t Ejector stroke in ram 60 / 70 mm Ram area 980 x 800 mm Lateral column opening 800 mm Ram adjustment 20 mm Drive power 80.0 + 5.5 kW Weight 47.0 t Space requirement (WxDxH) 3.5 x 3.3 x 6.0 m Weight of control cabinet 1.4 t Space requirement control cabinet (WxDxH) 4.9 x 0.5 x 2.6 m Multi-stage cold forging press with joint drive with continuously adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorized ram adjustment, pneumatic counterbalance cylinder in the press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in ram (3 t, 60 mm), motorized central lubrication

Stanje: rabljeno, Leto izdelave: 1997, Pressing force: 315 t Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Bolster area approx.: 1600 x 1100 mm Ram clamping surface approx.: 1600 x 1100 mm Pass-through opening in bolster: 600 x 180 mm Strokes per minute: 15 - 180 min⁻¹ Bolster height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions LxWxH: 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment The press was retrofitted to CE standards in 2015. In 2021, the press control was upgraded to a SIEMENS S7-TIA system. The coil line still uses a SIEMENS S5 controller. Additional equipment Stroke bars in the press table Hodpfxsuqd Tms Abxonn Automation KEMMERICH coil line comprising: Decoiler: load capacity: 5 t Straightener: Roll diameter: 70 mm Material thickness: 1 – 4.5 mm Strip width: 300 mm Feeder: Roll diameter: 160 mm Feed length: 0.1 – 9,999.9 mm Strip width: 30 – 350 mm Material thickness: 0.2 – 10 mm Material cross-section: 1,500 mm² Feed accuracy: +/- 0.05 mm Loading saddle

Stanje: novo, Leto izdelave: 2025, Tlak 315 t Razmak med stojali 2800 mm Fiksni hod 35 mm Število hodov 100 - 250 hodov/min Vgradna višina (hod + zgornja nastavitev kladiva) 560 mm Stranski prehod med stojali 600 mm Površina mize 2700 x 1200 mm Prehodna odprtina v mizi 2450 x 450 mm Hedpfx Absxcp Itoxsnn Površina kladiva 2700 x 800 mm Teža 80,0 t Zahtevan prostor (ŠxGxV) 5,1 x 2,65 x 5,25 m

Stanje: rabljeno, Leto izdelave: 1997, Total pressing force: 315 t Ram stroke: 160 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 1,050 mm Clearance between uprights (L-R): 2,740 mm Clearance between uprights (side): 1,500 mm Distance between oil drip pans: 2,400 mm Table clamping surface approx.: 2,740 x 1,800 mm Ram clamping surface approx.: 2,400 x 1,700 mm Strokes per minute: 10 - 60 min-1 Power requirement: 75.5 kW Machine operating hours: 77,341 h Height above floor level approx.: 5,500 mm Dimensions LxWxH: 5,400 x 3,300 x 5,700 mm Machine weight approx.: 80 t Control: Siemens S5 Standard equipment: Hydraulic tool clamping Additional equipment: Hnjdevmfzhjpfx Abxon Tool changing cart

Stanje: rabljeno, Technical Details: Total Rated Force: 1,000 t Clamping Area (left-right): x mm Clamping Area (front-back): x mm Table Area: 4,500 x 2,400 mm Total Rated Force: Presses 2-3-4-5 – 1,000 t each Table Area: Presses 2-3-4-5 – 4,500 x 2,200 mm Last complete overhaul in 2021, consisting of: Blank Automation, Manufacturer: Neuhäuser, Type: 19711505-00, Year: 2000, SN 367080, Material No. FK35835, with integrated blank washing system by AMTEC, oiler, pallet loading/unloading station, pallet change trolley, control system by Siemens, system no. Blank gripper, system no. 0608300, mounted on press Hnodpox Ag Azofx Abxjn Double-column press (MK11165), Manufacturer: Weingarten, Type: ZS 1600.48, Year: 1965, Order no. 324/64, double action, press force approx. 1,000 t, stroke 900 mm, stroke adjustment 350 mm, distance between table surface and slide 2,150 mm, blankholder force 600 t, stroke 700 mm, adjustment 350 mm, clear height between table and blankholder 1,940 mm, max drawing depth 300 mm, strokes/min 12, column spacing approx. 5,000 mm, table size approx. 4,500 x 2,400 mm, control by Siemens, Type S7 Blank automation, Manufacturer: ABB, consisting of: 2 blank grippers, mounted on press, system nos. 0608400, 0608500, blank turner and tilting station by ABB, movable, system no. Double-column press (MK11166), Manufacturer: Schuler, Type: P4E2 SQB 1000/4.5/0.7, single action, press force approx. 1,000 t, slide stroke 700 mm, slide adjustment 400 mm, strokes/min 14, distance between uprights 4,560 mm, table size 4,500 x 2,200 mm, slide area 4,500 x 2,200 mm, distance between table and slide surface 1,550 mm, draw device 300 t, stroke 250 mm, system no. 0186200, control by Siemens, Type S7 Blank automation, Manufacturer: ABB, consisting of: 2 blank grippers, system nos. 0608600, 0608700, with movable stacking and tilting table, system no. Double-column press (MK11167), Manufacturer: Schuler, Type: P4E2 SQB 1000/4.5/0.7, single action, press force 1,000 t, slide stroke 700 mm, upright spacing 4,560 mm, slide adjustment 400 mm, strokes/min 14, table area 4,500 x 2,200 mm, slide area 4,500 x 2,200 mm, distance between table and slide surface 1,550 mm, system no. 0186300, control by Siemens, Type S7 Blank automation, Manufacturer: ABB, consisting of: 2 blank grippers, mounted on press, system nos. 0608800, 0608900, with blank stacking and tilting table, system no. Double-column press (MK11168), Manufacturer: Schuler, Type: P4E2SQB 1000/4.5/0.7, single action, press force 1,000 t, slide stroke 700 mm, upright spacing 4,560 mm, slide adjustment 400 mm, strokes/min 14, table area 4,500 x 2,200 mm, slide area 4,500 x 2,200 mm, distance between table and slide surface 1,550 mm, system nos. 0186300, 0186400, control by Siemens, Type S7 Press automation, Manufacturer: ABB, consisting of: 2 blank grippers, mounted on press, system nos. 0609000, 0609100, with blank stacking and tilting table, system no. Double-column press, Manufacturer: Krup, Type: DPQV4-1000, SN 2602, Year: 1968, single action, press force 1,000 t, slide adjustment 400 mm, slide stroke 700 mm, strokes/min 14, distance between table and slide surface 1,550 mm, upright spacing 4,560 mm, table area 4,560 x 2,200 mm, slide area 4,560 x 2,200 mm, main drive 140 kW, Year: 1968, system no. 0186500.

Stanje: rabljeno, Leto izdelave: 1997, Pressure: 630 t Stroke: 300 mm Strokes per minute: 10–75 spm Table size: 3600 x 2200 mm Hnjdpfx Abowx R Rdsxjn Passage width: 4000 mm Ram area: 3600 x 2200 mm Lateral frame passage: 2000 mm Ram adjustment: 150 mm Installation height (stroke down, adjustment up): 1000 mm Operating voltage: 400 V Height above floor: 7600 mm Press pit depth: 2500 mm Total power requirement: 160 kW Machine weight: approx. 225 t Space requirement: approx. 750 m² Complete blanking line with decoiling/feeding system and destacking system. System suitable for strip width 300–1600 mm and strip thickness 0.5–3 mm. The machine is equipped with two sliding tables that can be swapped out from the front. The destacking unit is positioned laterally and has two pallet stations. Destacking can also be performed to the rear with 2 pallets. 3-fold coil feeding, each for 25 t; Schnutz decoiler, strip infeed, straightening machine, and roll feeder.

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 100 mm Cutting capacity at 90 degrees: flat 130 x 80 mm Cutting capacity at 45 degrees: round 100 mm (left) Cutting capacity at 45 degrees: round 75 mm (right) Speed: 30 / 60 rpm Saw blade dimensions: 350 x 32 mm Machine weight: approx. 220 kg Features: - Robust cast iron construction - Gearbox with bronze gear and ground/hardened steel worm, running in special oil bath - Vise with counter-tension device for double workpiece clamping - Electric coolant pump for blade cooling and lubrication Scope of delivery: - Adjustable length stop, 600 mm - Tool kit - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded drawings - Crane lugs for transport Hsdpfxoxabnmj Abxenn * Machine is supplied without saw blade Special accessories included: - Base cabinet with door (steel stand)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With automatic strip feeder BBV 300/200 600 kN | 100–800 strokes/min | Fully automatic | Swiss premium quality Technical Highlights: Nominal force: 600 kN Strokes per minute: 100–800 Max. feed length: 200 mm Year of manufacture: Unknown (no nameplate) / Function test: 2025 Drive power: 30 HP Control voltage: 24 V AC Power connection: 440 V AC / 50 Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 / 51 / 58 / 64 / 70 / 76 mm Shut height/ram adjustment: 80 mm Working dimensions: Max. tool width: 620 mm Strip width: up to 320 mm Ram area: 800 × 500 mm Hnjdpoxz Ugxsfx Abxjn Table area: 620 × 680 mm Max. strip width: 300 mm Max. feed pitch: 200 mm Max. material thickness: 6 mm Feed angle: 180° Machine dimensions: Footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Features: BBV 300 feed system – fully synchronized mechanical strip feeder Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediately available in Europe Worldwide shipping possible Contact us today for pricing and further technical details. We are happy to assist you in upgrading your production line with Swiss precision technology.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: NAVA Hodpfx Aox R U Nujbxenn Model: 2MI1600DE/SE Leto: 1998 Stanje: Rabljeno Skladiščna številka: 0367 Tlačna sila: 1.600 ton Število tlačnih točk: 4 Hod drsnika: 1.200 mm Hod zgornjega prebijala: 1.500 mm Dimenzija drsnika: 4.500 x 2.500 mm Dimenzija mize: 4.500 x 2.500 mm Pritiskalna blazina – skupna sila: 400 ton Hod spodnje pritiskalne blazine: 500 mm Izvlečni voziček: Prisoten spredaj