Register električnega ogrevanja

Helios** EHR-R 6/315

Stanje: skoraj kot novo (rabljeno), Eillert C25 H krompirni luščilec Iz nerjavnega jekla, kapaciteta 25 kg, primeren za krompir, korenje in drugo korenasto zelenjavo, trifazni priklop (3F). Iedpfx Adohpqykskjhw

Leto izdelave: 2006, stanje: dober (rabljeno), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Tested and inspected, Ihedodtr A Topfx Adksw

Stanje: rabljeno, Leto izdelave: 1988, Bobst Flexo 1604 Printing Press, 4 bottom printing units, anilox cylinders 120 l/cm and 80 l/cm Bobst Transfer Unit BOBST SPO 1600 FLATBED DIE-CUTTER, maximum format 1100 mm x 1600 mm / 43.3" x 63", with 4 printing units plus bottom printing, conventional roller feeder - Anilox cylinders: 120 l/cm and 80 l/cm - Open steel chambered doctor blade - Vacuum feeder - Die-cutting section - Waste removal section - Centerline II - High-pile delivery with two elevating tables - Maximum sheet size: 1100 mm x 1600 mm / 43.3" x 63" Ijdpfxjv Ifpuj Adkjhw - Minimum sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Die-cutting force: 400 t - Materials: E, B, C, CB, BE flutes - Maximum speed: 6,000 sheets/hour Machines can be sold separately.

Stanje: rabljeno, 100 kosov Schütz IBC kontejnerjev – posoda 640 l rabljena 🧰 Lastnosti proizvoda • Stanje: zelo dobro – neoprano • Material: PE - HD (visoko molekularni polietilen) • Barva: transparentna - naravna • Mere: 1200 × 800 × 1000 mm • Nazivna prostornina: 640 l Ihjdpfow E Hz Ejx Adkew • Teža: 45,3 kg • Odprtina: NW 225 / 9 • Iztočni ventil: loputni ventil DN50/2, integriran • Zaščitni okvir: pocinkan jekleni okvir iz jeklenih cevi (glejte slike) 💰 Cena: 40 € neto brez DDV • Količinski popust: na zahtevo • Stroški pošiljanja: po celotni Evropi na zahtevo • Dobavni rok: takoj na voljo • Ogled in prevzem: kadarkoli po dogovoru Stalno na zalogi več kot 5000 tm paletnih regalov različnih proizvajalcev (Spremembe in napake v tehničnih podatkih, podatkih in cenah ter predhodna prodaja pridržane! Glejte naše splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna masa: 52.000 kg, prebijalna sila: 600 t, potrebna višina: 3.520 mm, zahteva za prostor dolžina: 12.150 mm, potrebna širina: 9.340 mm, Machine for Die-Cutting, Embossing, Waste Stripping and Blank Separation Used machine, factory-refurbished by QTM Schwalmtal System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ For internal waste stripping as well as stripping of side and rear sheet edges ⦁ For stack-wise delivery of die-cut and stripped sheets with remaining gripper edges, or ⦁ For separation of gripper edges and subsequent stack-wise delivery of the residual sheets ⦁ With patented gripper carriage register system for highest registration accuracy ⦁ With bundle stacker enabling fully automatic separator sheet feeding and NON-STOP delivery, even for smallest cut sizes without requiring changeover (exchange table with comb structure) ⦁ Separator sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device in the delivery section ⦁ Modem ⦁ Standard machine height extension 600 mm Specification Max. sheet size: 1060 x 1450 mm Min. sheet size: 500 x 700 mm Max. die-cutting force: 6.0 MN (600t) Speed: 8,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Fully automatic pallet change device in delivery section Iodpot E Nthjfx Adkjhw Including platform Control system upgraded to Siemens S7 Completely overhauled machine drive Quick-action clamping frames in all tooling stations

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) Ihsdpog Ezarefx Adkow - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), Vacuum Packaging Machine VC999 07P, Year of Manufacture: 2007. Connection: 400V. Iedpfxsf Srcfs Adkjhw Chamber dimensions approx. 88 x 50 x 15 cm, equipped with 2x Rietschle CLFH 220 vacuum pumps. Year of Manufacture: 1998, output: 2x 5.5 kW. Very good condition, operates flawlessly.

Leto izdelave: 2025, stanje: novo, The RS-9 has been specifically developed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine with which it will be used. The shredder enables fast and safe shredding of paper, which can be taken directly from the die-cutting machine, allowing for easy transport to the baler via a conveyor system. The RS-9 shredder is designed to reduce waste from a die-cutting machine for straightforward transport via a belt system. Our shredder is simple to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 also features retractable shafts, ensuring worker safety and extending the service life of the device. The machine is fitted with a frequency inverter that allows for soft starting and precise motor control. Isdpfx Ajiklxbsdkohw Feel free to contact us.

Stanje: novo, volumenski pretok: 0,984 m³/h, Atlas Copco G7FF 500 L Screw Compressor – NEW Specification: • Condition: New • Manufacturer: Atlas Copco • Output: 984 l/min • Main motor power: 7.5 kW • Tank capacity: 500 l Ihedpfx Aehkttpedkjw • Maximum working pressure: 10.0 bar • Integrated refrigerated dryer • Electronic control of compressor operating parameters • Soundproof enclosure (only 67 dB) • CE compliant • User manual in Polish • Weight: 227 kg Additional information: • Manufacturer’s warranty available upon commissioning by an authorized Atlas Copco service provider • Available within 7 working days

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), A flexographic printing, slotting, die cutting, and folding-gluing line with bundle ejector (Flexo Folder Gluer) for corrugated board production and processing by DY Machinery is available. Processes: feeding, printing, creasing, slotting, die cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet passage X/Y: 1200mm/2750mm, max. print area X/Y: 1170mm/2700mm, min. sheet size X/Y: 320mm/600mm, total machine weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator, and alignment device. 2) Top-side flexo printing with pull roll transfer, ink-stop sensors, and automatic cleaning. 3) Creaser and slotter unit with trimming and gluing flap knives, slotting blade thickness: 8mm. 4) Rotary die cutter with polyurethane anvil and soft-die system, die-cutting size: +/-25mm. 5) Downward folding and gluing unit using VALCO VC 350 AG system. 6) Top stacker with bundle holding mechanism for bundle ejection. 7) Central control system ACCS-2000 with a job memory capacity of 100,000. The complete system features remote control for the flexo units, folding/gluing unit, and the bundle ejector. Documentation available. Inspection on site possible. Expected availability from October 2025. Ihjdpfx Adsu S I D Rekjw