5-osni obdelovalni center
Hedelius RS605 K

Name: Hedelius RS605 K
Brand: Hedelius
Availability: InStock

Leto izdelave

2011

Stanje

Rabljeno

Lokacija

Heilbronn

5-osni obdelovalni center Hedelius RS605 K

Prikaži karto

Podatki o stroju

Opis stroja:: 5-osni obdelovalni center

Proizvajalec:: Hedelius

Model:: RS605 K

Leto izdelave:: 2011

Stanje:: dober (rabljeno)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Hünderstraße 14, 74080 Heilbronn, Deutschland

Klic

Tehnične podrobnosti

Potovalna razdalja osi X:: 500 mm

Pomik osi Y:: 650 mm

Pomik po osi Z:: 520 mm

Podrobnosti ponudbe

ID ponudbe:: A16283470

Št. reference:: 5.3-759-22

Nazadnje posodobljeno:: dne 11.02.2025

Opis

CNC control Heidenhain iTNC530
NC rotary-swivel table on the right
Fixed table on the left
30-position tool changer
Electronic handwheel
ICS (internal coolant supply) 20 bar
Chip conveyor

Nedstu S Irspfx Adtjdd
Technical details:
X-axis travel: 1200 mm
X-axis travel, rotary-swivel side: 500 mm
X-axis travel, fixed table side: 570 mm
Y-axis travel: 650 mm
Z-axis travel: 520 mm
A-axis: +90° / -110°
C-axis: 360°
Spindle taper: SK40
Spindle speed range: 30–8000 rpm
Feed rate: 0–45000 mm/min
Swivel rotary table dimensions: 520 x 420 mm
Interfering edge diameter: 610 mm
Height of support bearing: 90 mm
Fixed table dimensions: 700 x 600 mm
Number of tool stations in tool changer: 30
Drive capacity: 22 kW
Weight (approx.): 8,500 kg

Technical data, accessories, and machine description are not binding.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2009

56 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 7131 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Obdelovalni center 5 osi HEDELIUS RS605 K IC 40/530/570/500/8

Hattingen

818 km

Obdelovalni center 5 osi
HEDELIUSRS605 K IC 40/530/570/500/8

Klic

Stanje: rabljeno, Leto izdelave: 2011, Travel path - X axis: 570 / 500 (1,070) mm Travel path - Y axis: 650 mm Travel path - Z axis: 530 mm Control: HEIDENHAIN iTNC 530 Spindle speed: 12,000 rpm Tool holder: SK40 5-axis machining centre | HEDELIUS RS605 K IC equipped with tool changer, internal coolant supply (50 bar), zero-point clamping system, and chip conveyor. Ndodpfx Aowlvraedtod The machine has only 7,863 spindle hours. A comprehensive tool package is included in the scope of delivery. The machine is in well-maintained condition. For further equipment details, please refer to the original order confirmation attached to the offer. #Tags: RS605 K IC 40 | RS-605 | RS 605

Poglej podrobnosti

mali oglas

5-osni univerzalni obdelovalni center DECKEL MAHO DMU 80 T

Dieburg

619 km

5-osni univerzalni obdelovalni center
DECKEL MAHODMU 80 T

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 5-Axis CNC Machining Center Year: 2006 Control: Heidenhain iTNC 530 Technical specifications: Ndjdjwn A Slspfx Adtjd X-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Max. torque: 130 Nm Tool holder: SK 40 (ISO 7388IIB) Tiltable axis B: 103° Working table: Clamping surface: 1,250 x 700 mm Rotary table diameter: 700 mm Rotatable axis C: 360° Max. table load: approx. 500 kg T-slots: 11x 14 mm x 63 mm Tool magazine: Number of tool stations: 32 (2x 16) positions Tool holder: SK 40 (ISO 7388IIB) Max. tool diameter: 80 / 130 mm Max. tool diameter with adjacent stations free: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg

Poglej podrobnosti

mali oglas

Mobilni stroj za vrtanje stolpcev CME MB 9000

Manlleu

1.115 km

Mobilni stroj za vrtanje stolpcev
CMEMB 9000

Klic

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, FREZALNI / VRTALNI STROJ S PREMIČNO KOLOMNO CME TEHNIČNE LASTNOSTI CME - MOŽEN OGLED V OBRATOVANJU Znamka: CME Model: MB 9000 Leto: 2007 CNC: Siemens Sinumerik 840D Os X: 9000 mm Os Y (vertikalno): 4000 mm Os Z: 1000 mm Os W (Ø 150 mm): 700 mm 2 rotacijsko-translacijski mizi (Linearna pot: 2000 mm) 2500 x 2500 mm, nosilnost 25 t Heidenhain optične letev na vseh oseh Neposredna glava Zamenjava orodja, 90 mest ZF menjalnik Njdpfou R Rk Hjx Adtodd Notranje hlajenje Odvzemanje ostružkov

Poglej podrobnosti

mali oglas

Stroj za rezkanje portalov BG Cam 1325 ATC

Biebrich

697 km

Stroj za rezkanje portalov
BG Cam1325 ATC

Klic

Stanje: dober (rabljeno), Leto izdelave: 2016, BG Cam 1325 ATC, Year of manufacture: 2016, Control system: Siemens 808 D, Travel X/Y/Z: 1270/2540/150 mm, High-pressure vacuum table, Table with 4 zones, Drive: Yaskawa servo motor, Rapid traverse X/Y: 35 m/min, Rapid traverse Z: 15 m/min, Resolution: 0.001 mm, Repeat accuracy: 0.01 mm, Spindle speed up to 24,000 rpm, New spindle in 2024, ER 25, 6-position tool changer, Ndedpfx Asuhzyqodted Linear guides, Tool length measurement, Vacuum pump, Extraction shoe,

Poglej podrobnosti

mali oglas

Courbevoie

1.003 km

Navpična stružnica
johnfordVTC1600

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Fanuc 21iTB control 16-position BT50 tool changer Worktables: 1600 mm diameter, maximum rotation speed 250 rpm, maximum load capacity 8,000 kg Ndjdpfxewzynds Adted Maximum workpiece diameter: 2,000 mm; maximum machining height: 1,250 mm Cross slide: 250 x 250 mm; Z-axis travel: 900 mm Chip conveyor

Poglej podrobnosti

mali oglas

Težka stružnica Weisser Heilbronn GIGANT CNC

Dieburg

619 km

Težka stružnica
Weisser HeilbronnGIGANT CNC

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, CNC Lathe Weisser Heilbronn GIGANT Year: 1989 Control: Heidenhain Swing diameter over bed: 1400 mm Swing diameter over faceplate: 1200 mm Ndedpfx Adjwmnqwetjd Swing diameter over cross slide: 1080 mm Maximum turning length: 1300 mm Spindle motor: 45 kW Accessories: Faceplate, jaws, tool holder, chip conveyor, documentation

Poglej podrobnosti

mali oglas

Donaueschingen

531 km

Center stružnica
Schaublin

Klic

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211433, teža obdelovanca (maks.): 1.200 kg, For sale is a Schaublin 135 lathe in good technical condition. The machine is fully operational and comes with accessories. All guides are in good condition and the machine is geometrically sound. The carriages run smoothly and evenly. The machine was overhauled in 2002 and has been regularly serviced according to the manufacturer's specifications. Nsdpfx Adov Rxhiotjdd Take advantage of the opportunity to inspect this machine on site.

Poglej podrobnosti

mali oglas

CNC stružnica GILDEMEISTER SPRINT 65 Linear

Lüdenscheid

779 km

CNC stružnica
GILDEMEISTERSPRINT 65 Linear

34.500 €

Začetna cena brez DDV

Klic

Stanje: dober (rabljeno), Leto izdelave: 2007, - Siemens 840 D CNC control - Bar capacity: 65 mm - Main and sub spindle with maximum speed of 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Speed of driven tools: 4,000 rpm - Tool holder: VDI 30 with drive according to DIN 5480 Ndsdpfx Adouw Izvotjd TRAVELS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) EQUIPMENT Coolant system Chip conveyor Bar feeder: TOP Automazioni XF 375

Poglej podrobnosti

mali oglas

Center CNC za struženje in rezkanje Okuma Macturn 550

Hedensted

1.133 km

Center CNC za struženje in rezkanje
OkumaMacturn 550

Klic

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 21.437 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 122574, Krmilnik: OSP P200 L Izredno malo delovnih ur vretena. Največji premer struženja: ø 720 mm Razdalja med vpenjalnimi glavami: 2.000 mm Hitrost glavnega vretena: 3.500 min⁻¹ (rpm) Moč glavnega vretena: 30 kW Podvreteno: Hitrost podvretena: 3.800 min⁻¹ (rpm) Moč podvretena: 22 kW Ndjdpfxsurfz Ij Adtsd Hitrost pogonskega orodja: 5.000 min⁻¹ (rpm) Moč pogonskega orodja: 22 kW Število pogonjenih orodij v revolverju: do 12 Zgornje vreteno za rezkanje: HSK100 Avtomatski menjalec orodja (ATC): 32 orodij HSK 100 Y-os: 250 mm (+125 / -125) Tlorisna površina: 6.150 x 3.073 mm

Poglej podrobnosti

mali oglas

Težka stružnica ZERBST DXP 5 / W15x15000

Oelde

807 km

Težka stružnica
ZERBSTDXP 5 / W15x15000

Klic

Stanje: rabljeno, Swing diameter: 3,200 mm Modified swing diameter: 2,400 mm Ndjdpfxjwtrz Hs Adted Swing diameter over support: 3,000 mm Max. turning length: 15,000 mm Control system: Sinumerik 840D Siemens Max. workpiece weight: 80,000 kg Working accuracy (up to): 0.01 mm Main spindle speed range max.: 50 rpm Approx. machine weight: 154.4 t Required floor space: approx. 20.7 x 6.0 m Heavy-duty lathe ZERBST - DXP 5 / W15x15000 - Measuring accuracy: < 0.01 mm Retrofit 2009 / 2012: - 2009: Conversion of control system to Sinumerik 840D - 2012: New main gearbox including main spindle drive Addition of holding brake, including electrical integration Modification and optimization of cylindrical roller bearing arrangement Modernization of control and safety technology

Poglej podrobnosti

Oglašujte tukaj