Stroj za oblaganje robov

Hebrock F4

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Transport chain with fixed special chain plates Isdpfx Ajhqadcebxsic Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: novo, Leto izdelave: 2026, Sestava sistemov za ravnanje s korpusi za izdelavo ročne, polavtomatske ali popolnoma avtomatske montažne linije za korpuse je vedno izvedena glede na zahteve stranke. Iiededx R D Depfx Abxjc Montažne linije za korpuse, ki vam olajšajo delo, zmanjšajo čase nastavljanja ter povečajo proizvodno zmogljivost, vam z veseljem podrobno predstavimo ob osebnem pogovoru.

Stanje: novo, Edge thickness up to 3 mm Total length 4,122 mm Feed speed 10 m/min with PLC control (including touchscreen) and hot-melt glue application indication to the workpiece for tape material up to 3 mm Jointing cutter (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation end trimming unit, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable profile cutter (combination version), corner rounding unit, surface scraper (including pneumatic lift), vacant station (for cleaning station or radius scraper), sturdy chain drive, double roller pressure beam with ball bearings, viewing window from the rear of the machine, extendable workpiece support, approx. 10 m/min feed speed. Art. No. F4/00/11 Iisdpfx Asvwd Uusbxoc - Whispercut jointing head F4/500/10 - Combination profile cutter head F4/500/20 - Radius cutter R=2mm F4/500/2 - Corner radius cutter R=2mm F4/08/2 - Quick-change device for corner rounding unit F4/08/4 - Radius scraper (incl. pneumatic lift) F4/09 - Radius scraper R=2mm F4/09/2 - Chassis F4/10 - Pneumatic 3-point adjustment (radius, chamfer, flush milling) F4/30

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel Iedpfx Asv Erkaebxsic T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Glavne značilnosti: Profesionalno glajenje: Popolno ravnanje in natančna debelinska obdelava v eni napravi. Sistem z dvojnim odpiranjem: Udobno, sočasno odpiranje miz za ravnanje za hitro preklapljanje na debelinsko glajenje. Glanjalna glava: Na voljo s preverjeno Silent-POWER® spiralno glavo za zelo tiho delovanje in površino brez trganja. Ijdpfxjy R D Nws Abxsic Natančnost: Masivne litoželezne ravnalne mize in natančno vodeno ležišče za debelinsko mizo. Tehnične podrobnosti (primer): Širina ravnanja: odvisno od modela (npr. 310 mm, 410 mm ali 510 mm). Dolžina ravnalne mize: velikodušno dimenzionirana za varno vodenje dolgih obdelovancev. Debelina: brezstopenjsko nastavljiva, opcijsko z elektronskim digitalnim prikazom (Power-Drive). Pogon podajalnika: Enakomeren podaj obdelovanca za popolno površinsko obdelavo. Prednosti: Prostorsko varčna zasnova zaradi kombinirane konstrukcije. Najvišja ponovljivost pri serijski proizvodnji. Stabilna zasnova »Made in Austria«.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 146 h, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodni tok: 35 A, največja višina reza: 204 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, vrsta nastavitve višine: električni, vrsta aktuacije: električni, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 2.000 obr/min, višina mize: 910 mm, leto zadnje generalne obnove: 2026, Oprema: CE označba, dokumentacija / priročnik, dozator, vrtilna hitrost brezstopenjsko nastavljiva, zaščitni pokrov žaginega lista, Altendorf F 45 EvoDrive plus (Skupna cena €52.050,-) + Miza z zračno blazino + Laserski prikaz reza Stroj s samo 150 delovnimi urami iz dvočlanskega podjetja se zaradi preoblikovanja prodaja po ugodni ceni - CNC vzdolžno vodilo 1300 mm z ojačano razširitvijo delovne mize - Ojačan motor 7,5 kW z VARIO regulacijo hitrosti 2.000 - 6.000 min⁻¹ brezstopenjsko - Povečana višina reza 204 mm - 2-osni predrezalnik z LED opozorilno lučko v nevarnem območju - Razširitev prečnega drsnika, izvlečna - Kotno-nagibno vodilo z DIGIT LD, rezanje do dolžine 3200 mm - Ojačana podaljšava 840 mm - Vklop/izklop na drsnem vozičku - Sprednji podporni valj - Orodjarna Iijdpezbc Uxjfx Abxec

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with run-out function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece processing sequence, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free positions for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit chip removal: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Iodsw I U Drspfx Abxoic Options: - Surcharge for radius scraper unit with blow-off device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with run-out function - Surcharge for diamond tooling, height = 65 mm for jointing unit - Riepe spray device (anti-stick) at jointing unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° bend + manual gate valve mounted on the machine, D=200mm Availability: short notice Location: Hochheim

Stanje: rabljeno, Skobeljni in debelinski stroj Felder AD 741 Spiralna gred Glavni motor 4 kW, Isdoxxavmopfx Abxeic Dolžina miz skobeljnika 2000 mm, Širina skobljanja 410 mm, Višina obdelave debelinke 230 mm, 1 hitrost podajanja, Ročna nastavitev mize debelinske skobeljnice z digitalnim prikazom višine Stroj pripravljen za delo, tih

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text Iiedpfx Asxwaz Hjbxec OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: novo, Leto izdelave: 2026, Hebrock - Altendorf Edge Banding Machine F5 next - New machine, still in its original packaging, with complete equipment - With PLC control including 15" touchscreen - Edging material up to 3 mm - Whispercut pre-milling unit including DIA-tool up to 2 mm - Coated, maintenance-free glue pot, PU quick-change pot - Including glue runoff device (downwards) - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper blade - Surface scraper blade including pneumatic lifting device - Buffing station - Combination milling head - Radius milling head R=2mm - Radius corner milling head R=2mm - Quick-change device for corner milling head - Additional exchange motor for corner milling head with tool assembly - Radius exchange motor R=1mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Chassis - Additional exchange glue pot including stand - PUR separation agent spraying unit - PUR cleaning agent spraying unit - Edge spraying unit for PUR/foil - Nesting for milling and radius scraper blade - Pneumatic 3-point adjustment (radius, chamfer, flush milling) - Pre-milling up to 50mm workpiece thickness - LED lighting in interior compartment - Workpiece thickness 8-50mm Ijdpfx Aboy Iw Nrjxsic - Minimum workpiece length approx. 160mm - Feed rate approx. 10m/min - Dimensions (LxWxH): 4.40 x 1.10 x 1.55m - Weight: gross 990 kg, net 930 kg - Extraction port 1 x 140mm Delivery and commissioning available