Oblaganje robov

Hebrock F 2

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) Psdolht Hzepfx Agperd

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition Podpfovvkfdox Agpsrd - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: novo, Leto izdelave: 2025, Your entry into edge banding could not be better, as the 3.3 m long F 2 is not only cost-effective and space-saving. It also comes with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edge application. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination cutter. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 5.9 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: approx. 3350 x 1300 x 1400 mm (LxWxH) Working table height: approx. 900 mm Weight: approx. 620 kg Podpoglfw Nefx Agpord Extraction nozzle: Ø 1 x 140 mm Flat pull scraper

Stanje: novo, Leto izdelave: 2025, HEBROCK robni lepilni stroj F2 next s PLC-krmiljenjem (vklj. z zaslonom na dotik) in nanosom talilnega lepila na obdelovanec za robni material do 3 mm: Spajkalni rezkar (vklj. DIA-orodje) do 2 mm globine rezkanja, brezvzdrževalna lepilna kad z možnostjo menjave in napravo za iztok lepila, HFK-končna žagalna postaja (pribl. 12.000 obr/min), HF-rezkalna postaja (pribl. 12.000 obr/min) z ločenim pnevmatskim nastavljanjem ter kombiniranim rezkalnikom z zamenljivimi ploščicami, robusten verižni pogon, dvojni zgornji pritisk z ležaji, inspekcijsko okno na zadnji strani stroja, izvlečna podpora za obdelovanec, podajalna hitrost pribl. 10 m/min. Vključno: F2/500/10 spajkalna glava Whispercut, F2/500/20 kombinirana rezkalna glava, F2/500/2 radius rezkar R=2mm, F2/12 ploščato strgalo (vklj. pnevmatski pomik). Prodpfx Aewmdbrjgped

Stanje: novo, Technical specifications: Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 290 mm Saw spindle diameter: 30 mm Scoring blade diameter: 90 mm Scoring spindle diameter: 22 mm Manual adjustment of saw blade height Tilting saw blade from 0° to 45° Manual adjustment of saw blade tilt angle Carriage length: 2200 mm Carriage lock Table extensions Extraction port diameter: 120 mm Pedohqxx Depfx Agpord Rip fence with 2 stops Eccentric clamp Guard Safety switch Motor power: 4 kW Power supply: 400 V Manufacturer: SEGA Brand new machine Overall dimensions: Length: 2200 mm Width: 2900 mm Height: 1150 mm

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device Predpfx Asl D Rp Ejgped HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Edge banding machine F2 next Psdpfx Aoi Am U Dsgpsrd With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HEGLA, KPL-MZ-III, 36 Compact glass storage system Year of manufacture: 2014. Load capacity: 180 t Maximum glass size: 3210 x 6000 mm, 36 compartments. In very good technical condition. Inspection possible by appointment. Available: IMMEDIATELY Prsdpfx Agjv Iqtxeped

Stanje: rabljeno, Leto izdelave: 2012, Base machine Olimpic K 800 "T-ERL" (47) 1 pc BASIC EQUIPMENT: - Ribbed steel machine base with tube reinforcements for optimal support of working units - Swiveling control panel - Support roller track with ball-bushing guidance along the entire machine length - Protective and noise-reducing cover with separate doors between the gluing and finishing units - Extraction nozzles mounted on the noise-reduction cover - Electrical system with lockable main switch - Emergency stop buttons at infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: - Feed chain with rubber sliding shoes, featuring a high coefficient of friction, mounted on a 1 ¼” industrial chain - The chain runs on two guides made from hardened and ground steel, one round and one flat, to ensure straight-line feeding and prevent lateral displacement - Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction, complete with double rows of ball-bearing mounted rollers and protective device for the pressure rollers - Manual lifting of the pressure system with automatic positioning of the working units upon change of panel thickness - Mechanical digital indicator for monitoring the selected panel thickness CONTROL "ORION 100": Control unit complete with PLC, allowing fast, simple, and error-free execution of customized machining programs (max. 60 programs). Podpfx Aoxq Apgogperd Manages pneumatic positioning of units if available on the machine. (The control system does not include pneumatic positioners.) - Alphanumeric keypad and display - Function keys for quick actuation of working units - Ambient temperature range: 0 to +45°C MAIN FUNCTIONS: - Control of working units and automatic activation of motors - Monitoring and regulation of glue pot temperature - Selection for longitudinal and transverse processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics for absolute data and individual operations: quantity, edge band usage, total chain feed distance - Unit selectable in mm or inches Technical Data OLIMPIC K800 T-ER L: Edge thickness: 0.4 to 8 mm Max. edge band thickness (roll): 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Max. edge section dimensions: 135 mm² Turntable diameter: 780 mm Max. overhang compared to panel thickness: 4 (2+2) mm Min. panel width (with 210 mm min. length): 55 mm Min. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mm Min. distance between consecutive panels at m/min 11 (16): 750 (850) Standard Equipment: - Pre-milling unit at infeed RT-E - Gluing station VC-800 - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V - ½ free space for surface scraper - 1 S free space for surface scraper, universal cutter, or buffing unit - 1 F free space for air nozzle unit Complies with European safety regulations (C.E. mark) 1 pc Voltage 400 V EU 1 pc Frequency 50 Hz 1 pc "Autoset" for models ER2, T-ERS and T-ERL Enables all necessary adjustments for each processing change from the control panel. Includes: - Timed pressure unit - Pneumatic and independent swiveling of end saw blades (front/back) - Pneumatic remote adjustment for the flush trimming unit RI/800

Stanje: rabljeno, Holz Her Auriga 1308 FÜ + PU Kompaktna izvedba – debelina robnega traku 0,4 – 8 mm SPS zaslonsko krmiljenje Edge-Control PPC 221 s barvnim zaslonom Predrezalna enota pred lepilno enoto Popolnoma avtomatski magazin za robni material za kolutni in trakasti material Lepilna postaja GLU JET s kartušami + PU lepljenjem – multisistem+ Nanos lepila z uporabo šobne tehnologije Višina obdelovanca: 6–65 mm Avtomatska nastavitev višine lepila Stiskalna enota 1912-3 pnevmatska Odrezovalna enota 1918 pnevmatska za kolutni in trakasti material do 8 mm debeline robu S pnevmatskim nastavljanjem naklona od 0–10° za odrezne žage Rezkalna enota za poravnavanje do 8 mm, radijsko rezkanje – posnetje faze 15° preko upravljalne plošče Pedpfxjxrr Uzj Agpsrd Oblikovna rezkalna enota 1832 pnevmatska: zaobljanje robov do debeline 3 mm v prehodu Strgalo za posnetje faz in radije Ravnina strgala – končna obdelava Škropilna enota – PU Kompletna DIA-oprema orodij vključena Stroj je DELAVNIŠKO OBNOVLJEN, v ODLIČNEM STANJU Na voljo iz zaloge Lieboch