HEBROCK AKV 3005 DK-F

HEBROCK AKV 3005 DK-F

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Ljdpfjxyiilox Aacjhc

Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical description: - Hot-melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end trimming station (16,000 rpm) for front and rear protruding edges - HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side - Spare spaces for additional machining units (Hebrock system) - Feed approx. 10 m/min - Cutting depth adjustment for end trim saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double pressure roller top beam - Viewing windows on both rear and operator sides - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8–40 mm - Weight (depending on configuration): approx. 1,400 kg - Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm Airtronic for machines up to 8 mm edge thickness, 1 piece Technical data: - Edge thickness: 1.2–3.0 mm possible - Maximum panel thickness: 25 mm - Feed speed: 7–10 m/min depending on edge material - Ready for operation: 3 min - Air consumption: approx. 800 l/min for entire machine - Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw - Extraction as usual - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius) Buffing station (polishing wheel), 1 piece Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device Ledpfxeyfp N Dj Aacjhc Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device Special cleaning system for PU glue outlet downward, 1 piece 60 mm panel thickness for machines w/ jointing, 1 piece - Max. workpiece thickness with jointing unit: 60 mm - Jointing range at 40 mm–60 mm - Workpiece thickness up to 2 mm Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness - Max. overlay protrusion: 8 mm Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction - Highly recommended from AKV 3005 DK-F Ball bearing for corner rounding unit, 24.1 mm, 1 piece Ball bearing for corner rounding unit, 24.2 mm, 1 piece Nesting for combination milling unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Nesting for radius scraper unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Release agent spray unit, 1 piece Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue Antistatic spray unit, 1 piece - Mandatory for airtronic - Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang Storage location: Supplier

Stanje: rabljeno, Leto izdelave: 2005, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA920DK-F12960, Rabljeni stroj GM020.0029 Leto izdelave: 2005 AKV 3005 DK-F 8 mm izvedba 1. Frezalna postaja: Kombi Lhjdpfx Aajw In R Eocjc Čistilna postaja Frez za zaobljene robove Spojni frez Ravninski strgalo z dvigom Profilno strgalo Podvozje Pnevmatska nastavitev freze SPS krmiljenje Priprava za zamenjavo bazenov