Stroj za oblaganje robov

HEBROCK AKV 3003 DK F

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 1386, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 31 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 50 mm, največja debelina roba: 8 mm, vrsta nastavitve višine: mehanski, leto zadnje generalne obnove: 2025, Hebrock Edgebander AKV 3003 DK F Edgebanding machine with hot-melt adhesive application directly to the workpiece For edge material up to 8 mm and jointer milling including DIA tooling - Ergonomically arranged control panel - Easy adjustment from the operator side (digital displays) - Maintenance-free quick-heating glue pot - Robust chain drive - High-frequency cross-cut saw (300 Hz) - High-frequency flush trimming station, including tool set-up and fine adjustment from the operator side - Automatic edge feed - Protective and sound-insulating hood - Extendable workpiece support - Electronic temperature control - Pneumatic end trimming unit for up to max. 3 mm edge thickness and 60 mm edge height - Double upper pressure rollers - Signal lamp for workpiece feed - Aggregates inspection window (machine rear and operator side) - Safety standard according to CE Complete with: - Surface scraper unit - Corner rounding unit - 8 mm edge thickness Workpiece height approx. 10 – 40 mm, Feed rate approx. 10 m/min, Power supply 11 kW (31 A) 400 Volt, 50 Hz, Length approx. 4300 mm Lsdpfx Aoyud Sfol Nork Weight approx. 1250 kg Offered "as is" As inspected, ex location Seevetal, without freight and packaging, Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Lrodpfxsvvkd Tj Al Njk

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Rabljeni stroj GM020.0068 AKV 3003 DK - F Leto izdelave: 2007 Izvedba: 3 mm 1. rezkalna postaja: Kombinirana Površinski vlečni strgalnik z izkopom Podvozje Pnevmatska nastavitev rezkanja Ročica končnega stikala, naklon 7,5° Lredpfxew Nih Is Al Nok

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rabljeni robni lepilni stroj SCM - Model: Olimpic K360 T-ER1 - Zelo dobro stanje. - Takoj na voljo - Video na zahtevo - Leto izdelave 2016 - Vrhunska oprema (2 dodatna lepilna rezervoarja) Lsdpfx Aloyrr Nas Nork

Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical description: - Hot-melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end trimming station (16,000 rpm) for front and rear protruding edges - HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side - Spare spaces for additional machining units (Hebrock system) - Feed approx. 10 m/min - Cutting depth adjustment for end trim saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double pressure roller top beam - Viewing windows on both rear and operator sides - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8–40 mm - Weight (depending on configuration): approx. 1,400 kg - Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm Airtronic for machines up to 8 mm edge thickness, 1 piece Technical data: - Edge thickness: 1.2–3.0 mm possible - Maximum panel thickness: 25 mm - Feed speed: 7–10 m/min depending on edge material - Ready for operation: 3 min - Air consumption: approx. 800 l/min for entire machine - Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw - Extraction as usual - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius) Buffing station (polishing wheel), 1 piece Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device Special cleaning system for PU glue outlet downward, 1 piece Ledpfoyfp N Dox Al Nerk 60 mm panel thickness for machines w/ jointing, 1 piece - Max. workpiece thickness with jointing unit: 60 mm - Jointing range at 40 mm–60 mm - Workpiece thickness up to 2 mm Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness - Max. overlay protrusion: 8 mm Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction - Highly recommended from AKV 3005 DK-F Ball bearing for corner rounding unit, 24.1 mm, 1 piece Ball bearing for corner rounding unit, 24.2 mm, 1 piece Nesting for combination milling unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Nesting for radius scraper unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Release agent spray unit, 1 piece Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue Antistatic spray unit, 1 piece - Mandatory for airtronic - Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang Storage location: Supplier

Stanje: rabljeno, Leto izdelave: 2003, Rabljeni stroj Leto izdelave: 2003 Oprema in tehnični podatki: - Krmiljenje MAGELIS - Za vroče lepilo na osnovi EVA - Lepljenje: 2x1,5 kW, u=12000, 200 Hz - Prirezovanje: 2x0,2 kW, avtomatski zasuk 0°/3°, 2 HM žagini listi 140 mm - Poravnalno rezkanje: 2,07 kW, z WPL glavami HF 70, premer 70 mm - Rezkanje radija: R2 - Radijska strgala - Površinska strgala - Zgornji lepilni bazen - Mere obdelovanca: - Minimalna širina: 70 mm - Debelina: 8-42 mm - Minimalna dolžina: 150 mm - Debelina roba: 0,2-6 mm - Podajalna hitrost: 12 m/min - Priključek za odsesavanje: 160 mm Dimenzije: 4.500 x 1.250 x 1.300 mm Teža: 1.650 kg Ljdpfsxymfwsx Al Nsrk Razpoložljivost: takoj Skladiščna lokacija: Baden-Württemberg