Voziček za orodje

HBM HBM 196 r

Stanje: novo, Dimensions (L x W x H): 780 x 480 x 1050 mm Weight: 79.5 kg Number of drawers: 6 pcs. The tool trolley is equipped with 6 storage drawers. Fitted with 2 fixed and 2 swivel castors, one of which has a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked individually. All drawers feature a quick-release mechanism and soft-close damping. Height-adjustable storage compartment behind the door. Central locking system with 2 keys. The tool trolley is equipped with 155 pcs. of tools: Nedpfx Aou Imk Robielg 3 socket sets: 1/4", 3/8", 1/2". Ratchet combination spanner set from 6 - 22 mm. Extensions for socket sets, various Allen keys from 1 - 10 mm. Various screwdriver sets. Assortment of pliers.

Stanje: novo, Cutting diameter: 305 mm Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m Nedpfsu Dbvtex Abislg - Mitre cuts up to 60° to the left and 45° to the right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Leto izdelave: 2025, Yanigav Zemeljski vrtalnik TAM 245 • Enostavna tritočkovna priključitev • Zelo robustno, varjeno ogrodje • Vsestranski močan menjalnik od 30 do 90 KM Nodpfx Abor Eznieielg • Primerni svedri premera od 10 cm do 80 cm in največje višine 1,80 m • Odmak 1,30 m levo in desno od osi • Okvir dolžine 245 cm • Korekcija nagiba svedra (spredaj/zadaj in desno/levo) • Sveder ni vključen

Stanje: novo, Dimensions (L x W x H): 675 x 510 x 880 mm Weight: 56 kg Number of drawers: 5 pcs. Professional tool trolley for workshop equipment. Internal dimensions of the top 4 drawers: 56 x 43 x 10 cm. Nlsdpfxsu Iml Ij Abiog Internal dimensions of the bottom drawer: 56 x 43 x 17 cm. Wheel dimensions: 100 x 30 mm.

Stanje: novo, Leto izdelave: 2026, Stična vrtalna strojna oprema CORMAK Z5020 BF Vario je vsestranska in sodobna stična vrtalna strojna oprema za obdelavo kovin, zasnovana za intenzivno uporabo v industrijskih obratih, delavnicah in oddelkih za vzdrževanje. Naprava ponuja stabilnost, natančnost in visoko udobje pri delu zahvaljujoč gladkemu nastavljanju hitrosti vretena in ergonomski konstrukciji. Glavne prednosti stroja: * Brezstopenjska regulacija hitrosti vretena – obseg 190–2700 vrt/min za optimalno prilagoditev vrsti materiala. * Trdna konstrukcija ohišja – zmanjšanje vibracij in izboljšana natančnost vrtanja. * Delovna miza z nastavljivo višino – natančen zobnik in možnost nagiba v obsegu ±45°. * Elektronski prikazovalnik vrtljajev – nenehno spremljanje parametrov vrtanja. * Laserski kazalec in LED osvetlitev – pomagajo pri nastavitvi orodja in izboljšajo vidljivost delovnega območja. * 100 mm vpenjalna priprava v kompletu – stroj je takoj pripravljen za uporabo. Konstrukcija in tehnologija: Stična vrtalna strojna oprema CORMAK Z5020 BF Vario je opremljena s stabilno stično kolono s premerom 70 mm in široko osnovo 480 × 290 mm, kar zagotavlja odlično oporo celotni konstrukciji. Vreteno v standardu MK2 ima hod 120 mm, kar omogoča globoko vrtanje brez potrebe po spreminjanju nastavitev. Konstrukcija mize omogoča njeno vrtenje in nagib, zahvaljujoč čemur lahko uporabnik natančno prilagodi položaj obdelovanca izvedeni operaciji. Natančnost in učinkovitost: Močan 750 W motor in maksimalni premer vrtanja 20 mm omogočajo učinkovito obdelavo večine kovinskih materialov. Elektronski prikazovalnik hitrosti in omejevalnik globine vrtanja zagotavljajo popoln nadzor nad procesom. Dolga kolona in velik obseg nastavitve višine mize (660 mm) omogočajo delo z visokimi predmeti in orodji z velikim raztegom. Uporaba: Model Z5020 BF Vario je stična vrtalna strojna oprema za obdelavo kovin, priporočena za: * mehanične in tesarske delavnice, * oddelke za vzdrževanje, * lahko in srednjo industrijo, * izdelavo prototipov in serijsko proizvodnjo. Standardna oprema: * 100 mm vpenjalna priprava * Laserski kazalec za vrtanje * LED osvetlitev * Elektronski prikazovalnik hitrosti * Trotajna ročica * Omejevalnik globine vrtanja * Delovna miza z nastavitvijo višine s pomočjo zobnika Tehnični podatki Parameter Vrednost Maksimalni premer vrtanja 20 mm Obseg vrtljajev vretena 190 – 2700 vrt/min Napajanje 230 V Nastavek vretena MK2 Nsdpfovuf Ikex Abijlg Maksimalni hod vretena 120 mm Razdalja vretena od stične kolone 170 mm Razdalja vretena od osnove 1060 mm Obseg nastavitve višine mize 660 mm Premer stične kolone 70 mm Dimenzije mize 280 × 280 mm Dimenzije osnove 480 × 290 mm Moč motorja 750 W Višina stroja 1650 mm Teža 75 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Nedsmhhypopfx Abiolg Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Leto izdelave: 2020, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), PTC CJ-1E High-Pressure Cleaner – similar but not Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner... Nlsdpfx Abjgcbzcjisg - Operating pressure: 110 bar - Flow rate: 12 l/min - Motor: Electric 4-pole, 230V, 2.2 kW, 1400 rpm - Dimensions: 540 x 440 x 680 mm - Net weight: approx. 40 kg - High-pressure pump: Comet triple plunger pump with ceramic plungers - Durable injection-moulded plastic housing - Practical holder for gun with lance - Self-priming pump with EASY-START feature - Handle fitted with holders for power cable and high-pressure hose - Easy maintenance thanks to quick-release front cover - Large wheels (220 mm Ø) for easy transport on stairs and rough terrain - Pressure gauge (manometer) - Integrated professional unloader valve - Delayed Total-Stop system - Pulsation system - Rotary switch - Thermal motor protection - Manual stainless steel hose reel with 30 m 1/4" high-pressure hose - Two 1/4" F pipe cleaning nozzles - Spray gun with lance and fan-jet nozzle The CJ-1E is a mobile high-pressure cleaning unit, ideal for cleaning and clearing pipe blockages in pipes of 30 to 120 mm diameter. Equipped with a 2.2 kW, 230 V electric motor, it is suitable for use in apartments, homes, or commercial premises for sinks and toilets, as well as for garden and general cleaning tasks. The Comet LW-K pump with easy-start and pulsation function ensures maximum reliability and high cleaning performance. The CJ-1E can be used in both vertical and horizontal positions. The Total Stop function ensures the unit switches off when not in use. The robust plastic housing and large wheels provide maximum durability and optimal mobility across uneven surfaces.

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Nljdpfx Aod H Hhzsbiog Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support Nlsdeurc S Ropfx Abisg - Automatic coolant system

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: samodejen, vrsta goriva: električni, naslednji pregled (TÜV): 10/2025, Leto izdelave: 2020, obratovalne ure: 900 h, Oprema: UVV varnostni pregled, gumene gosenice, nizka raven hrupa, žerjav, Tip-top condition! Njdpfxjvriuvs Abijlg