Stroj za vrtanje in rezkanje

HBM BF 45 Profi DRO

Stanje: novo, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot size ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Table longitudinal travel ----- 560 mm Table cross travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3Ph INCLUDES * Drill chuck with shank ISO30 - B16 * Forward/Reverse switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * Tapping function * Digital depth stop * CE plug OPTIONS * Base cabinet Hnsdpega T Anefx Adksi * Milling vice * ISO30 tool holder + 12 collets in case * Milling cutter set

Stanje: rabljeno, Contact grinding wheel dimensions: 50 x 100 Ø mm Drive motor: 380 V, 0.7 kW Hjdpfjb Tcv Hox Adkjni Space requirement: 650 x 550 x 1050 mm

Stanje: rabljeno, Funkcionalnost: nefunkcionalno, Leto izdelave: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the vehicle’s rear tailgate, which enabled the military to transport a truck or other military equipment. The "XV" following LARC indicates the maximum payload capacity: 15 tons. The vehicles are constructed from aluminum and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (US measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins eight-cylinder diesel engines, each producing 300 HP. On land, they could reach a maximum speed of 48 km/h, and in water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight is 35.5 tons. Hnjdsxcgy Hjpfx Adkoi The previous owner intended to convert the boats to fully electric propulsion in order to offer sightseeing tours in the Wadden Sea. Approximately €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. It is not known exactly what work still needs to be completed.

Stanje: dober (rabljeno), Leto izdelave: 2005, Hurco machining center VMX 1, condition as shown in the pictures Hjdjv Nzucspfx Adkoni

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 4 SV Machine No. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle mount: MK 4 - short quill Throat depth: 340 mm Quill travel: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, stepless Motor power: 2.3 and 3.4 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed selectable via 2 motor speeds and stepless adjustment through variator gearbox - Intermediate gearing with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting system Required space (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg Good condition Hnedpjn N Ekcjfx Adksi

Stanje: rabljeno, Lathe for metal Hodpfordmm Dsx Adkeni

Stanje: rabljeno, Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate - Clamping plate is from a coordinate measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate features: with support ribs - With 4x leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm Hedpfxjfc T Tqs Adksni - Weight: 2,749 kg

Stanje: dober (rabljeno), Koda: 0230 Znamka: MAKITA Model: 5603R - CE standard Krožna žaga s kovčkom za rezanje lesa, plastike, aluminija in različnih materialov – CE standard Tehnični podatki: Premer rezila mm 165 Motor 1100 W enofazni Obrati 5000 Največja globina reza pri 90° mm 54 Največja globina reza pri 45° mm 38 Hodpfoxn Stcex Adkeni Teža kg 4,9 Prevoz ni vključen

Stanje: zelo dobro (rabljeno), Drilling capacity: 20 mm Spindle mount: FEHLMANN Spindle speeds: 50–6,300 rpm Throat depth: 276 mm Cross table: 530 x 255 mm Digital readout Hedpeuy Sazsfx Adksni Various accessories MARCELS MASCHINEN CH

Stanje: novo, Leto izdelave: 2026, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It is perfect for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as threading up to M12 mm. Thanks to its milling capacity of up to 80 mm in width and keyway milling up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features automatic spindle feed, increasing work efficiency. Additionally, it is equipped with digital readout for enhanced operational accuracy and a cooling system to maintain optimal temperature during processing. The machine is ready for immediate use and available from stock. Ideal for professionals seeking high quality and performance in metalworking. Product features: - HEAVY, STABLE CAST IRON BASE - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT ON THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - SWIVEL HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available TECHNICAL DATA: Drilling capacity in steel: 32 mm Hnsdpoud H H Usfx Adkoi Drilling capacity in cast iron: 45 mm Face milling cutter diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) Spindle taper: MT 4 Spindle feed: 125 mm (automatic feed) Table size: 820 mm x 240 mm Base dimensions: 580 mm x 600 mm Max. spindle-table distance: 445 mm Spindle-column distance: 260 mm Traverse X/Y/Z: 515/175/430 mm Quill feed rate: 0.12; 0.18; 0.25 mm/rev Head swivel left/right: 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 350 kg Available equipment: - MK4/B18 drill chuck arbor - Digital readout - Hand tools - Drill chuck 3–16 mm/B18 - MK4/MK3 reducing sleeve - MK3/MK2 reducing sleeve - Operating instructions in English