Rezkalni stroj Z5045C 2S

Hans Schreiner Z5045C-2S

Stanje: novo, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Reach: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm Travel X: 380 mm Travel Y: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Dedpfjwhd Afox Altouw Weight, approx.: 300 kg Equipment: - Cross table - Thread draw spindle - Tapping device - Rotatable table - Height-adjustable safety cover - Spindle guard protected by limit switch

Stanje: novo, Leto izdelave: 2026, The CORMAK HBS260 bandsaw for cutting pipes, profiles and bars is widely used in all metalworking workshops where precision, quality and cutting speed are important. This model is equipped with a swiveling arm adjustable from 0–60°. The robust frame construction ensures precise and quiet operation. It features a removable chip tray for easy cleaning! Machine Features The horizontal metal bandsaw with a swiveling arm allows perpendicular cuts as well as angled cuts in the range of 0 to 60°. Material can be fed manually or via any mechanical device, while the blade feed is automatic. The blade guides are equipped with special carbide plates and bearings. This greatly enhances blade tracking, blade life, cutting accuracy, and cut quality. Carbide guidance significantly reduces wear on both the machine and the blade. The machine is equipped with an efficient coolant pump with a closed circuit system. The saw arm is made from a single cast iron piece, and together with the 27 mm wide blade used in this saw, it allows reliable, repeatable serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features a quick clamp. The blade guides are equipped with carbide plates – solid carbide inserts – and a ball bearing system. It is THESE CARBIDE GUIDES that ensure the precision and straightness of the cuts. Dodoudi Uzopfx Altjuw The upper surface of the base is formed as a tray for draining coolant and collecting chips generated during cutting. A cast iron work table with a swiveling arm and a control panel on a separate arm are mounted to the base. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed is provided by the downward movement of the arm. The feed speed (cutting speed) is adjustable via a hydraulic cylinder. Feed speed is adjustable from the machine's control panel. There are two selectable blade speeds: 35 and 70 m/min. After the cut is completed (when the arm reaches the lower position), the blade drive is automatically switched off. Safety is ensured by blade guards and micro-switches that cut off power to the motor at the end of the cycle or upon opening any of the covers. Additional protection includes automatic machine shutdown in the event the blade breaks. Technical Specifications: - Blade size [mm]: 2520 x 27 x 0.9 - Blade tension: Mechanical (manual) - Blade speeds [m/min]: 35, 70 - Arm descent: Stepless – hydraulic cylinder - Vise base height [mm]: 860 - Saw wheel diameter [mm]: 300 - Saw frame swivel range [°]: 0–60 - Power supply: 3 phase, 400V - Main motor power [kW]: 1.1 / 1.5 - Coolant pump motor power [kW]: 0.05 - Dimensions with base [cm]: 150 x 80 x 140 - Weight [kg]: gross/net – 210 / 180 kg Included in delivery: - 2 x M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Duodpfx Aljfg E Hzotow Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: rabljeno, Leto izdelave: 1973, x-axis travel: 815 mm y-axis travel: 400 mm z-axis travel: 410 mm Quill stroke: 130 mm Spindle speed range - stepless: 67 - 2300 rpm Number of spindle speeds: 8 Dodpfxsvimrms Altsuw Feed rate: 0.04 - 0.08 - 0.15 mm/min Table feed rates: 15 - 230 mm/min Clamping surface of table: 1120 x 255 mm T-slots: 3 T-slot width: 16 mm T-slot spacing: 63 mm Overhang of milling spindle: 260 mm Ram adjustment: 315 mm Main drive motor: 1.5 kW Machine weight approx.: 1.0 t Space requirements approx.: 1.75 x 1.80 x 2.10 m Swivelling and tilting milling head

Stanje: dober (rabljeno), Leto izdelave: 2003, Tračna žaga za kov, polni avtomat, tračna žaga, vertikalna tračna žaga, horizontalna tračna žaga, hidravlična horizontalna tračna žaga, avtomat za tračno žago, avtomatska tračna žaga za kov. -Proizvajalec: DoAll, horizontalna avtomatska tračna žaga tip C-916A Dedpfx Aeh Ra Hkoltsuw -Podatki o rezu - ploščati material: ca. 410 x 230 mm -Podatki o rezu - okrogli material: ca. 270 mm -Podatki o rezu - kvadratni material: ca. 230 mm -Hitrost rezilnega traku: brezstopenjsko nastavljiva, 15 - 120 m/min -Moč motorja: 3 kW -Rezilni trak: ca. 4014 mm -Hladilna naprava: prisotna -Dimenzije: 2080/1400/H1390 mm -Teža: 670 kg