Rabljena tračna žaga za kovino Hans Schreiner MBS270FH

Hans Schreiner MBS270FH

Stanje: novo, Leto izdelave: 2026, Horizontal band saw with a swiveling arm for metal cutting, enables cutting in a plane perpendicular to the axis of the workpiece as well as at any angle from 0 to 60º. Material feeding can be performed manually or with any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings, which significantly affects blade guidance, its durability, cut straightness, precision, and cut quality. The saw arm is made of profiled CAST IRON. The control panel is located next to the arm. The drive from the electric motor is transmitted to the drive wheel of the cutting blade via a worm gear motor. The blade is tensioned on two cast iron wheels with a manual tensioner and guided by an adjustable rolling and linear carbide guide set. There is a separate coolant reservoir with an electric pump inside. The descent speed of the arm (cutting speed) is adjusted with a hydraulic cylinder. Feed speed is controlled via the control panel. Two blade speeds are selectable: 36 and 72 m/min. In the rest position of the arm (after the cutting process), the blade drive is automatically switched off. Safety is ensured by the blade covers and microswitches that stop the motor after the cutting cycle or upon opening any of the covers; additional protection is provided by the automatic shutoff of the bandsaw in the event of blade breakage. Technical specifications Band saw blade dimensions 2455×27×0.9 mm Blade tensioning mechanical (manual) Blade speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm descent control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400 V Motor power 1.1 kW Net/Gross weight 220 kg / 284 kg Warranty 12 months Manual operation yes Fgedpfx Aevuf S Noh Njd CE declaration yes Miter angles 0º ø230 mm 260×150 mm 225×225 mm 45º ø165 mm 180×130 mm 165×165 mm 60º ø105 mm 100×90 mm 110×110 mm *Please note: the device is supplied by default without a CEE connector, as there are many different types. If you would like to receive a connector along with the machine, please contact the seller before purchasing or during the ordering process.

Stanje: novo, Bandsaw blade --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 m/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90° ----- 270 mm / 260 x 320 mm Cutting capacity 60° ----- 140 mm / 140 x 140 mm Cutting capacity 45° ----- 230 mm / 220 x 220 mm Cutting capacity -45° ---- 200 mm / 220 x 150 mm INCLUDES Bandsaw blade Workpiece stop Base cabinet Fsdpega Tzuofx Ah Nogd Manometer for bandsaw blade tension Bandsaw blade guide with carbide inserts Quick-release vice Coolant pump Hydraulic cylinder Motor protection switch Automatic end stop

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering Fsdpoxaa S Rofx Ah Negd - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Tehnične specifikacije glejte PDF datoteko. Fgjdpfxexp Hygo Ah Ned

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Fodjw U U Uwjpfx Ah Negd Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering - Saw band guides with carbide plates - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, dolžina tračnega lista: 2.480 mm, Metal bandsaw CY275A An extremely high-quality metal bandsaw with reducer and carbide blade guides! The CY275A metal bandsaw is 3-phase and features a lubrication system, blade tension indicator, reducer, and carbide blade guides for precise work and exceptionally long service life. Technical data: Motor with reducer: 1.1 kW / 1,5 HP Voltage: 400V/50 Hz, 3-phase 2 cutting speeds: 45 - 90 m/min Blade size: 2480 x 27 x 0.9 mm Quick workpiece clamp Saw base Cutting at 0° - round 240 mm / square 190 x 190 mm / rectangular 245 x 150 mm Fgjdpextu U Hjfx Ah Njd Cutting at 45° - round 145 mm / square 150 x 150 mm / rectangular 190 x 150 mm Cutting at 60° - round 90 mm / square 90 x 90 mm / rectangular 120 x 90 mm Net weight: 185 kg Gross weight: 200 kg Packaging (W x D x H) 140 x 65 x 90 cm

Stanje: novo, vhodna napetost: 400 V, vrsta upravljanja: ročni, skupna masa: 85 kg, Oprema: CE označba, Simple, ergonomic, and cost-effective metal bandsaw EBS 128 CL BERNARDO. Capable of miter cuts from -60° to +45° adjustable via the saw arm, with a 125 mm capacity for straight cuts (flat workpiece 150x100 mm). In addition to setting the cutting angle by adjusting the saw arm rather than repositioning the material, a key advantage of this saw is the integrated cooling system included as standard. This makes the EBS 128 CL an excellent choice for the semi-professional craftsman – offering performance, ergonomics, and ease of use. Miter cutting possible within the range of +45° to -60° Stepless saw arm adjustment via hydraulic cylinder Automatic cut-off – limit switch Robust, torsion-resistant saw arm Three cutting speeds adjustable by V-belt Sturdy frame construction ensures accurate and quiet operation without vibration Standard equipped with quick-release vice and material stop Standard equipped with cooling system Compliant with latest standards with separate CE emergency stop button Technical specifications: Round cutting capacity 90°: 125 mm Flat cutting capacity 90°: 100 x 150 mm Round cutting capacity 45° R: 95 mm Flat cutting capacity 45° R: 95 x 76 mm Round cutting capacity 60°: 50 mm Flat cutting capacity 60°: 50 x 56 mm Working height: 740 mm Fjdpeyr Nq Uofx Ah Negd Bandsaw blade dimensions: 1638 x 13 x 0.65 mm Bandsaw blade width: 13 mm Cutting speeds: 23 / 35 / 55 m/min Motor power: 0.75 kW Motor power S1 100%: 0.55 kW Voltage: 400 V Dimensions (W x D x H): 980 x 550 x 1100 mm Weight approx.: 85 kg Scope of delivery: Bandsaw Quick-release vice Workpiece stop Automatic end-of-cut switch Mobile machine base Hydraulic cylinder Cooling system Separate CE-compliant emergency stop button

Stanje: novo, – 2 hitrosti – Poševni rez – Hidravlično nastavljiv pritisk žaganja – Hitrovpenjalna objemka – Hlajenje – Samodejni izklop – Žagin trak 2080 x 20 x 0,9 mm – Nujna zaustavitev Fgodpfx Ahjygytpe Njd – Dokumentacija – 400V

Stanje: novo, Moč motorja: 1,5 kW (400V-3PH) / 1,5 kW (inverter) Kapaciteta rezanja pri 0°: Ø 255 mm ■ 200 mm █ V200 x 340 mm Kapaciteta rezanja pri 45°: Ø 220 mm ■ 200 mm █ V200 x 220 mm Kapaciteta rezanja pri 60°: Ø 135 mm ■ 135 mm █ 135 x 135 mm Fgjdpfx Ahsx Rkpko Njd Kapaciteta rezanja pri -45°: Ø 220 mm ■ 200 mm █ V200 x 135 mm Hitrost rezanja: 35/70 m/min / 20~80 m/min (inverter) Dimenzije žaginega lista: 2750 x 27 x 0,9 mm Teža: 390 kg Dimenzije: 1750 x 770 x 1600 mm