Tračna žaga za kovino ARG235PlusAI

Hans Schreiner MBS-ARG235PlusAI

Stanje: novo, Leto izdelave: 2025, CORMAK HBS320 – Double-sided bandsaw for angle cutting from -45° to +60°. The machine is based on designs and solutions by Polish engineers. Its precision and accuracy place it at the forefront of bandsaws capable of cutting widths up to 320 mm. A key advantage of the machine is its latest-generation hydraulic cylinder. The unit features a reinforced vise base and a quick-clamping vise. Machine Features Isdpfx Aoi D Dgwjgpoa The CORMAK HBS320 metal bandsaw enables cutting material at any angle from -45° to +60°. The workpiece can be fed manually or with any feeding device. Cutting feed is gravity-based, regulated by oil flow within the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cycle is complete, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a massive, solid grey cast iron casting. With a 27 mm wide saw blade, it is fully suited for series cutting of structural, stainless, and tool steels. The vise is set in an adjustable bed and equipped with quick clamping functionality. The blade guides use a system of rolling bearings and carbide inserts, ensuring excellent cutting precision and straightness. This significantly extends blade life and improves cutting accuracy and quality. Carbide guidance greatly reduces machine and blade wear. The base is a rigid, welded steel body. Inside, there is a separate coolant tank with an electric pump. The top of the base forms a tray for collecting coolant and chips generated during cutting. The cast iron work table, with a swiveling arm on both sides and a control panel, is attached to the base. Feed rate is regulated from the control panel. Two blade speeds are selectable: 44 and 88 m/min. At the lower arm position – after cutting – the blade drive is automatically switched off. Safety is ensured by saw blade covers and microswitches that stop the motor after the cycle or when any cover is opened. Additional protection includes automatic bandsaw shutdown in case of blade breakage. Technical Data MAX Ø: 260 mm (straight cut) MAX H x W: 320 x 160 mm (straight cut) POWER SUPPLY: 3-phase 400V TOTAL POWER: 2.1 kW ARM DESCENT CONTROL: Hydraulic cylinder BLADE LENGTH: 2740 x 27 x 0.9 mm CUTTING SPEED: Stepless 0-50 m/min BLADE SPEED: 44 / 88 m/min VISE BASE HEIGHT: 920 mm DIMENSIONS: 1400 x 880 x 1550 mm WEIGHT: 330 kg Cutting Parameters Angle 0º ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 The listed price is NET. The price does not include shipping costs. For more information, please contact us by phone or email. Visit our website to view our full offer.

Stanje: novo, Machine in stock and immediately available Double mitre metal band saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor power rating S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made from stainless steel, steel, etc., for commercial use - Rugged, generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic downfeed cylinder - Quick-action vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimum cutting results - CE/IEC compliant, with German documentation and German after-sales service Ijdpfxod R Sipo Agpea Scope of delivery: - Saw blade - Material stop - Manometer (blade tension) - Carbide blade guides - Vice with quick release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic end cut-off - Base frame

Stanje: novo, Leto izdelave: 2022, SPECIAL PRICE, stock machine year 2022, condition: new List price: €4,200 STOCK MACHINE – The ARG 235 plus is a manual metal bandsaw offering high cutting precision. This machine enables continuously adjustable mitre cuts from -45° to +30° (swivel range: 45° to the left and 60° to the right). Technical specifications: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz Isdomftv Rspfx Agpja ● Blade speed: 40 and 80 m/min ● Saw blade: 2710 x 27 x 0.9 mm Standard equipment: ● Powerful belt drive ● Infinitely variable feed adjustment from the operator panel ● Manual clamping of the workpiece, movable vice with dovetail guide ● Simple setting of the saw for mitre cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in various sizes and configurations!

Stanje: novo, Leto izdelave: 2025, MEBAbase: The must-have for makers. The starter saws of the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, professional craftsmen, or metalworkers – there is a solution for everyone. The portfolio ranges from small manual mitre saws to straight cut automatics, forming the foundation of your workshop. The universally applicable MEBAbase 17G mitre band saw machine features an ergonomic design and an outstanding price-performance ratio. Simple, central operation. Technical data Cutting capacity 90° – 175 – 200x75 or 190x135mm Isdpfjdb Rwaox Agpsa 45° – 110 – 150x110mm 30° – 75 – 100x70mm Cutting speed 35 – 80 m/min Drive – saw band 2kW; 230V, 50Hz Saw band tension Electrically monitored Saw band dimension 2140 x 20 x 0.9mm Weight 143 kg Dimensions 1080 x 800 x 1750mm Standard equipment of the MEBAbase 17 G: - Quick mitre adjustment from 90° – 45°, stepless via scale with 0.5° accuracy - Mitre pivot point is the intersection of the saw band and the material fence, preventing any change in length measurement when changing the angle - Powerful 2000 W motor - Manual quick-release material clamping - Full coolant system - Saw band tension electrically monitored - 1 saw band installed on the machine, 6/10 TPI - Saw band drive with end stop - Digital operating manual and spare parts list - Anthracite paint (RAL 7016) Technical modifications reserved. The machine consists of two parts and must be assembled according to the assembly instructions. Information on the exact delivery time will be provided in your order confirmation.

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Isdporah S Hofx Agpoa Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: novo, Leto izdelave: 2022, SPECIAL PRICE, Stock machine year of manufacture 2022, Condition: new List price: €14,110 STOCK MACHINE – Semi-automatic metal band saw with high cutting precision! With this machine, miter cuts are infinitely adjustable from 45° left to 30° right (Swivel range: 45° left and 60° right). Technical specifications ● Cutting capacity Iodpsmf T Hpefx Agpsa - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0.9–1.5 kW / 400 V / 50 Hz ● Band speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0.9 mm Standard features: ● Hydraulic control of saw frame ● Automatic saw frame height limitation via contact sensor ● Easy and convenient material clamping via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, stepless miter adjustment of the saw ● Electric blade tension monitoring with saw blade breakage control

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: Ijdehpktvopfx Agpea - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Leto izdelave: 2025, Standard Equipment - Torsion-resistant, robust cast saw frame - Powered chip removal brush - High-performance industrial worm gear motor Isdpfx Agefg Eq Rjpoa - Automatic shut-off after cutting process - Mechanical saw blade tensioning with electric blade breakage monitoring - Quick-release, movable vise - Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) - Electric coolant pump - Precision ground carbide saw blade guides (adjustable) - Large diameter round support table, rotates during miter cuts, miter angle display (scale) facing operator - Direct switch from manual to lowering operation - Easily removable chip collection tray - Material stop 500 mm with scale - Incl. saw band with combined tooth pitch 4/6. Technical Data - Motor: Three-phase 400 V, pole-changeable, 1.1/1.5 kW - Saw blade dimensions: 2720 x 27 x 0.9 mm - Flywheels Ø: 300 mm - Cutting speed: 40/80 m/min - Vise clamping width: 275 mm - Working height: 978 mm - Weight: 370 kg - Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting range: see data sheet Additional accessories available on request. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU THE ENTIRE RANGE OF FLOTT PRODUCTS! REQUEST A QUOTE!

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 27 x 0.9 mm Table height: 950 mm Cutting speed: 18–110 m/min Cutting diameter: 255 mm Cutting capacity at 90° (square): 240 mm Cutting capacity at 90° (flat): 300 x 180 mm Cutting capacity at 45° (round): 210 mm Cutting capacity at 45° (square): 190 mm Cutting capacity at 45° (flat): 200 x 160 mm Cutting capacity at 60° (round): 135 mm Cutting capacity at 60° (square): 110 mm Cutting capacity at 60° (flat): 130 x 100 mm Cutting capacity at 45° right (round): 180 mm Cutting capacity at 45° right (square): 160 mm Cutting capacity at 45° right (flat): 180 x 100 mm Total power requirement: 1.5/1.8 kW Machine weight approx.: 350 kg Space requirement approx.: 1700 x 900 x 2000 mm Manufacturer no.: 20437 Description: - Mitre cuts left 60° and right 45° Iodpfot I D Tujx Agpoa - Quick-action vice, adjustable in T-slot for fast repositioning - Hydraulic brake cylinder - Large, ball-bearing turntable for easy mitre adjustment (durable) - Chip removal brush - Machine base with automatic cooling system - Lockable main switch, separate emergency stop - EMC (Electromagnetic Compatibility), UVV (Accident Prevention Regulation) - Current consumption display (indicates saw band wear, tool monitoring) - Automatic increased power output with the proven Berg & Schmid 3-stage AutoCut system

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions: 3375 x 27 x 0.9 mm Band speed: 18 – 110 m/min Table height: 940 mm Ijdpfsnq Sanjx Agpsa Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double-mitre metal bandsaw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-adjustable clamping vice - Heavy-duty, large material support - Automatic coolant system Image shows semi-automatic version.