Obdelovalni center s prehodnim podajanjem

Hans Hundegger AG ABM-B P10

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. Ledpfx Astuyr Iodkjhd The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. The milling arm is also built from a heavy-duty steel construction. Hydraulic milling head. 22 kW motor. The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Stanje: novo, Leto izdelave: 2024, SINGLE-BLADE TRIMMER useful cutting length from 4.2 to 8.2 m maximum cutting thickness 160 mm parallel guide sawdust hopper Ledpfxefw Nv Re Adkjhd

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An inspection on site is possible. Lhodpfeurwy Aox Adksd

Stanje: dober (rabljeno), WD frame saw type GXW 71, equipped with spherical roller bearings on the main shaft. Suitable for all base plates of GXV and GXW frame saws. Fully hydraulic. Includes hydraulic saw blade tensioner. Ideal as a replacement frame saw or for flywheel exchange. Ljdpfx Adjuql Ilokehd

Stanje: dober (rabljeno), Leto izdelave: 2011, Fully automatic wood infeed with feed roller conveyor Extension for cross conveyor and infeed roller conveyor for timber lengths up to 13 m Cross conveyor for loading and feeding Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse groove milling machine Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning system "two-hand operation" Electronic control with EKP software Lodpfx Ajwuppwodkshd Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm timber tray Safety devices and perimeter guarding

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor Ledpfx Asu Hmacodkshd 11 kW feed unit non-driven outfeed table machine workshop inspected machine cleaned and newly painted

Stanje: rabljeno, prevoženi kilometri: 835.837 km, moč: 309 kW (420,12 KM), prva registracija: 11/2010, vrsta goriva: dizel, lastna masa: 9.580 kg, največja dovoljena obremenitev: 16.420 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.480 mm, Leto izdelave: 2010, gradbena višina: 3.850 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, tempomat, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile, pre-owned truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a robust diesel engine delivering 309 kW (420 hp) and meeting Euro 5 emission standards. Equipped with an automatic transmission and a steerable/liftable axle, the STRALIS offers excellent maneuverability and versatile operation. The vehicle features a distinctive yellow metallic paint finish. With an overall height of 3,850 mm, width of 2,550 mm, and length of 9,480 mm, it is designed for heavy-duty transport and has a permissible total weight of 26,000 kg. Lheder Uzgcjpfx Adked The specification includes two doors and two seats, air conditioning, and an INTARDER braking system for additional safety. The truck is registered as a commercial vehicle and has a green emissions badge (Euro 4), allowing access to low-emission zones. With only one previous owner and regular maintenance, the STRALIS is ready for high-performance applications. Steerable/lift axle Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical double-sided wood press by C.O.P.E. Brand. Two work areas measuring 620x110 cm each. Lodjudy A Nopfx Adkshd

Stanje: dober (rabljeno), Leto izdelave: 1992, Dvoranski žerjav, žerjav, električni vitel z jeklenico, dvižni mehanizem, motorni jekleni vitel, motorni vitel, koloturnik, vlečni vitel, škripčevje -Proizvajalec: Stahl, žerjavni voz z električnim vitlom z jeklenico -Žerjavni voz: Tip GO 24 20 16 -Hitrost vožnje: 20 m/min -Razmik med kolesi: 800 mm -Jekleni vitel: Tip AS 2010 -Vlečna sila: 1000 kg / nosilnost 4000 kg -Hitrost bobna: 16 m/min / dvižna hitrost 4 m/min -Transportne mere: 1250/1180/V400 mm -Lastna masa: 356 kg Lhedpel Tuvdofx Adkod

Stanje: zelo dobro (rabljeno), TECNI-ARMENTIA CH-70 Edger Lsdpfx Adjidmptekshd – hydraulic control – programmable cutting width – storage for up to 12 programs – centering feed table TECHNICAL SPECIFICATIONS: maximum cutting width: 700 mm maximum cutting height: 130 mm main motor power: 55 kW maximum material width: 830 mm length of fixed sleeve: 300 mm length of movable sleeve: 100 mm minimum material length: 700 mm spindle diameter: 65 mm sleeve diameter: 85 mm disk diameter: 350 – 400 mm feed speed hydraulically adjustable, stepless maximum feed speed: up to 38 m/min infeed table length: 2700 mm roller width: 700 mm roller diameter: 140 mm centering infeed table 2 lasers pump motor power: 4 kW anti-kickback pawl row three upper feed rollers three lower feed rollers hydraulic hold-down hydraulic height adjustment dimensions (L/W/H): 480 / 200 / 230 cm weight: 4000 kg