Stroj za brizganje

Haitian JU7500II

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 7.500 kN, premer vijaka: 80 mm, delovna prostornina: 2.262 cm³, Clamping force: 7500 kN Clear space (h x v): 1110 x 960 mm Mold opening stroke: 1400 / 900 mm Mold installation height min./max.: 450 / 1150 mm Opening width: 2050 mm Ejector stroke: 300 mm Ejector force forward/backward: 195 kN Injection unit: Screw diameter: 80 mm L/D ratio: 24.8 Injection pressure: 2200 bar Shot volume: 2262 ccm Shot weight (PS): 2058 g Screw speed: 145 rpm Plasticizing rate: 71 g/s Electrohydraulic equipment: Rated power of pump motor: 83 kW Hjdpjx Hx Sfsfx Abhjh Installed heating capacity: 50 kW Oil capacity: 950 ltr. Dimensions and weights: Space requirement approx.: 9.24 x 3.0 x 3.10 m Total weight: 33000 kg Accessories: - Vibration isolation elements Additional equipment: - 2 x hydraulic core pulls on movable platen - 2 x hydraulic core pulls on fixed platen - 24 x hot runner control zones - Robot interface according to Euromap 67

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s Hjdpfxjw Aw Tas Abhjh - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) Only 17,000 hours in automatic cycle! Technical Main Parameters: Clamping force: 10,000 kN Opening stroke: 1,220 mm Minimum mold height: 500 mm Maximum mold height: 1,160 mm Daylight between platens: 2,380 mm Tie bar spacing: 1,160 x 1,160 mm Platen size: 1,650 x 1,700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2,721 cm³ Shot weight (PE): 1,986 g Injection speed: 544 g/s Max. injection pressure: 2,280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50,000 kg Equipment and Features: Hedpfxowtglts Abhjh 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pulls (4x fixed platen, 4x moving platen), with servomotor 432 – 8x core relief 662E – 16x integrated hot runner zones 623 – Acoustic alarm 237C – Safety clamping force sensor 430C – 8x pneumatic cascade control Cylinder and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 pipes + hoses + cable ducts + valves + filters + nozzles + assembly, all per Lamky specification (Stäubli quick couplings) Total power sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core pull circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 Hodpfx Absw U N Ixshjh • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Krauss Maffei Injection Moulding Machine KM 1600 – 17200 MX Year of manufacture: 2016 General Description: Modern injection moulding machine with a fully hydraulic clamping system. Equipped with the advanced MC6 control system, based on an industrial computer operating in real-time Ethernet technology. The system is operated via an integrated 19-inch control panel with a colour touchscreen, LED backlighting, and graphical visualisation of all active processes (ProcessDesigner module). Plasticising Unit: Complete system for thermoplastics processing Screw diameter: 135 mm Version with wear (abrasion) protection Non-return valve Open nozzle Technical Data: Clamping Unit: Clamping force: 16,000 kN Mould opening force: 1,120 kN Platen dimensions (W x H): 2550 x 2100 mm Tie bar clearance (W x H): 1870 x 1420 mm Opening stroke: 2700 mm Mould height (min.–max.): 700 – 1600 mm Max. daylight: 3400 mm Ejector stroke: 350 mm Hodpfjwyw Npex Abhjh Ejector force (forward / backward): 300 / 150 kN Injection Unit: Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Shot weight for PE: 6860 g Screw speed (nominal / max.): 81 / 100 rpm Electrical and Hydraulic Equipment: Main drive power: 160 kW Installed heater capacity: 93 kW Number of barrel heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 / h Oil tank capacity: 2400 l Dimensions and Weight: Net weight with control cabinet: 92 t Machine dimensions (L x W x H): 14.17 x 4.04 x 2.93 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tonnes) 🔹 General Information: Year of manufacture: 2017 Control Unit: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm Hedpfx Aswzy N Usbhsh Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max. nozzle force: 129 mm / 950 kN Max. nozzle stroke: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Max. mould opening stroke: 1,800 mm Min. / max. mould height: 600 mm / 1,200 mm Max. daylight (between platens): 2,400 mm Tie bar spacing (H × W): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 9.000 kN, premer vijaka: 100 mm, delovna prostornina: 3.691 cm³, Schließeinheit: Lichte Weite (h x v) 1180 x 1000 mm Werkzeugöffnungsweg 1600 / 1000 mm Werkzeugeinbauhöhe min./max. 500 / 1300 mm Öffnungsweite: 2400 mm Auswerferhub 300 mm Auswerferkraft vor/zurück 195 kN Spritzeinheit: Schneckendurchmesser 100 mm Ls/D-Verhältnis 22 Spritzdruck 1800 bar Hubvolumen 3691 ccm Schußgewicht (PS) 3359 gr. Schneckendrehzahl 135 1/min Plastifizierstrom 793 g/s Electrohydraulische Ausrüstung: Nennleistung Pumpenmotor 85 kW Installierte Heizleistung 71 kW Ölfüllung 780 ltr. Maße und Gewichte: Raumbedarf ca. 9,24 x 3,21 x 2,88 m Gesamtgewicht 38000 kg Zubehör: - Schwingelemente - 4 x 8-fach Wasserbatterie Zusatzeinrichtungen: - 2 x Luftventil - 2 x hydr. Kernzüge an BWAP - 2 x hydr. Kernzüge an FWAP - 1 x pneum. Kernzug an BWAP - 1 x pneum. Kernzug an FWAP Hedpfxjxcakrs Abheh - Roboterschnittstelle nach Euromap 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Engel duo 1800/500 eco drive Zapiralna sila: 500 t Premer polža: 70 mm Volumen vbrizga: 1139 cm3 Vbrizgalni tlak: 1735 bar Razdalja med stebri V: 830 mm Razdalja med stebri H: 910 mm Tip: Horizontalen Pogon: Hidravlični CC300 krmiljenje Število ur: 38.000 Euromap 67 2 izvleka jedra Hodpfx Asw Hbylsbheh Ecodrive 2 črpalki Hitro-vpenjalni sistem

Stanje: novo, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 26,5 kW (36,03 KM), vrsta hlajenja: zrak, skupna masa: 365 kg, skupna širina: 1.150 mm, skupna dolžina: 1.950 mm, skupna višina: 1.400 mm, trajanje garancije: 6 meseci, ogrevalna zmogljivost: 31 kW (42,15 KM), Zrakom hlađeni rashladnik/Toplinska pumpa KAMPMANN WSAN XSi 14.1 26,5 kW/31 kW Rashladni kapacitet: 26,5 kW / 7,53 tona (12/7 — 35°C) Grijaći kapacitet: 31 kW / 8,81 tona (40/45 — 7°C) Godina proizvodnje: 2019 Opcije: Toplinska pumpa. Hidraulički modul Rashladni krug: 1 kom. Izmjenjivač topline: Pločasti Kondenzator: Bakar / aluminij Kompresori: 1 kom. Mitsubishi Electric LNB65FAEMC (rotacijski, inverter) Vrsta rashladnog sredstva: R410a Broj ventilatora: 1 kom. ZKSN-750-8-10 Hidraulički modul: 1 kom. vodena pumpa WILO BAC40-125-0,75 Dimenzije: 1,95 x 1,15 x 1,4 m Težina: 365 kg Radni sati: 0 h Stanje: Novo Hedpswbdhnofx Abhjh

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 27,2 kW (36,98 KM), vrsta hlajenja: zrak, skupna masa: 550 kg, skupna širina: 860 mm, skupna dolžina: 1.670 mm, skupna višina: 1.800 mm, trajanje garancije: 6 meseci, Zračno hlajeni hladilnik TECHNOTRANS OMEGA K 340L 27,2 kW Hladilna moč: 27,2 kW / 7,73 ton (14/19 — 32°C) Letnik izdelave: 2025 Opcije: hidravlični modul Hladilni krog: 1 kos Izmenjevalnik toplote: ploščni Kondenzator: mikrokanalni, aluminij Kompresorji: 1 kos Panasonic C-SCN903H8K (scroll) Tip hladilnega sredstva: R513a Število ventilatorjev: 1 kos + 1 kos (EC-ventilatorji) Hidravlični modul: 1 kos vodna črpalka Grundfos CM10-3 A-R-I-V-AQQV J-A-A-N, zalogovnik. Hodexyw Ipjpfx Abhjh Dimenzije: 1,67x0,86x1,8 m Teža: 550 kg Delovne ure: 0 h Stanje: Novo